How to use the mug press attachment on the press:
WARNING and IMPORTANT to note:
- Do not heat the mug press without the correct size/type of mug inside. - For a bigger quantity of mugs you need to press, make sure you switch the press off to cool down after every 10 mugs. - When the printing is just finished and the element is still hot. Put in a mug to absorb the heat, which can extend the lifespan of the element. - If you press ceramic mugs, you need to put the mug into lukewarm water after pressing to stop sublimation, otherwise, it will bleed the print. DO NOT DO THIS WITH GLASS MUGS, THEY WILL EXPLODE/CRACK WHEN TOUCHING THE WATER.
TWO ELEMENT PLUG-IN POINTS – USE ONLY ONE AT A TIME You cannot use the flat press and another attachment simultaneously. The controller is unable to provide enough power to heat both elements to the correct temperature at the same time.
1. Make sure the press is switched off. Unscrew and then pull out the cable connection of the big flat press.
2. Bring the mug press closer and plug the mug press cable into the controller. Insert it into the small plug area on the left and tighten the connection securely. Close the black cap on the big plug area.
Made with FlippingBook - professional solution for displaying marketing and sales documents online