Connelly 2025 Dealer Book

2025 - DEALER CATALOG

PADDLE PAGE 46

TUBES PAGE 53

SKI BINDINGS PAGE 14

SLALOM SKIS PAGE 4

LIFE VESTS PAGE 71

GLOVES PAGE 82

ADULT COMBO SKIS PAGE 18

KID'S COMBO SKIS PAGE 20

LEISURE FLOATS PAGE 65

KNEEBOARDS PAGE 22

WAKE BINDINGS

WAKESURFERS PAGE 34

WAKEBOARDS

ACCESSORIES PAGE 84

PROLINE ROPES & HANDLES PAGE 86

PAGE 24

PAGE 30

2 // CONTENTS

CONTENTS // 3

CONNELLY SKIS

2025 DEALER BOOK

SLALOM SKIS

SKI LAY-UP

SKI WIDTH

90/10 CARBON/GLASS Carbon is extremely light and super responsive. We combine that with 10% fiberglass which dampens vibration, turning choppy water into butter and drastically increasing the life of your ski. 50/50 CARBON/GLASS Blending an equal mix of carbon and fiberglass creates a fast, responsive ski with consistent, smooth flex that won’t chatter on imperfect water. FIBERGLASS Fiberglass tech has been around since the 60’s but advancements in layup, weave, and fiberglass properties give us the consistent flex, vibration dampening, light weight skis we have today.

Narrow skis ride deeper in the water, offering more contact and control. This makes edge transitions faster and requires less leverage to achieve low angles, quick turns and explosive speed. Wide skis are necessary at slower speeds to keep the ski on top of the water and provide a stable and predictable ride. To maximize performance and control, we use the same basic features as our top end skis and tune them for less speed.

SKI FLEX

Flexibility is a critical factor to find the perfect platform for your style of skiing. By utilizing different orientations, types, and amounts of carbon and fiberglass we can fine tune the flex of each ski to perfectly suit the intended use. Our high-performance skis use carbon to provide precision and explosive acceleration. If you’re looking to just get out on the water and have a good time, our recreational skis contain fiberglass for a forgiving and less demanding ride.

BASE FEATURES

SPEED V-TECH V-Tech adapted for a faster moving ski. Curves in the “V” shaped steps disrupt more flow in the center of the tunnel and less along the edge. This reduces overall drag while maintaining edge hold. V-TECH V-Tech is the key to increased maneuverability and decreased drag. Six “V” shaped steps regulate the flow of water on the base of the ski by breaking up the wetted surface area from the front binding to the fin. In short, less water sticks to your ski as you accelerate forward. CONNELLY TRACKING SYSTEM A subtle spine feature on the tip of the ski helps keep the front tracking straight while the boat starts to pull you up on deep water starts.

PERFORMANCE GUARANTEE

If the Outlaw or Big Daddy do not perform better and make slalom skiing more fun, we will apply your purchase toward any other Connelly slalom ski. Guaranteed within 30 days of purchase. Guarantee on 2025 products in North America. EXPIRES 8/31/2025

SKI CONSTRUCTION

BINDING LOCATION

[A] TOP GRAPHIC Provides great looking top graphics and a layer of UV protection increasing the ski's longevity. [B] FIBER REINFORCED LAYERS Fiber layers on both sides of the core provide superior strength without compromising flex, ensuring you’ll have the power to shred slalom buoys and the responsiveness for an afternoon cruise. [C] BINDING REINFORCEMENT This layer of glass reinforces the connection between your ski and bindings, transferring response from you to your ski without any lost energy. [D] BINDING INSERTS High performance models contain #8-32 inserts giving you more threads in a smaller area. This allows a more secure connection with a shallower insert. [E] CORE At the heart of the ski is the core. High performance models have a lightweight PVC core to provide the ultimate in weight reduction and resilience. Our recreational skis use polyurethane cores to provide a stable and durable foundation. [F] BASE Not only does the base hold the graphic layer and provide UV protection, it also features specific textures to help the ski perform at its best on the water, reducing drag and directing flow where it needs to go.

Binding location is measured from tail of ski to heel of front binding.

[A]

[B]

TUNNEL SHAPE

[C]

FIN SPECS

STANDARD TUNNEL A concave feature that runs the center length of the ski, setting it deeper in the water and giving the skier more edge hold. A standard tunnel leaves flatter surface between the edge of the tunnel and the bevel, giving the ski more stability while maintaining edge hold. WIDE TUNNEL This tunnel design leaves an extremely narrow flat spot between the edge of the tunnel and the bevel of the ski. The effect is a ski that actively seeks to be on edge and is most useful for experienced skiers and buoy chasers that have above average ski control. DOUBLE TUNNEL Simply put, the double tunnel is a tunnel within a tunnel. This unique design sets the ski deep in the water and gives extra bite when on edge.

[D]

[E]

[B]

FIN DEPTH

[F]

FIN LENGTH

DFT

SKI MODEL C1 C1 (63") Rocket

FIN LENGTH 6.840" 6.830" 6.854"

FIN DEPTH 2.520" 2.490" 2.468"

DFT 0.745" 0.760" 0.762"

4 // WATERSKIS

WATERSKIS // 5

CONNELLY SKIS

2025 DEALER BOOK

A NEW DIMENSION OF FIN TUNING

A NEW DIMENSION IN FINE TUNING

Humankind’s long storied struggle to negotiate 6 buoys faster and on a shorter rope has met some physical limitations. Subtle tweaks in ski geometry and construction are all that has differentiated the myriad of options available. Now it’s time for the most revolutionary advancement in decades. Versatail (patent pending) - our new interchangeable tail system with the ability to alter the geometry of your ski, ushers in a new era. Now skiers can fine tune the ski to their preferences. Changing these blocks will alter the flow of water off the tail of the ski, taking a step beyond the standard fin and binding position adjustments.

Innovation focused on precise fin adjustment is finally here. Hard core skiers have previously only dreamed of a fin system tied to threaded bolts for fine adjustments. The Versafin allows skiers to adjust the fin up, down, forward and back all on threaded mechanisms. It is now easier to precisely and accurately make fin adjustments. Ski smarter not harder. Patent Pending.

C1 65", 66", 67", 68" skis include the VT, VS, VR, VRS, and VSR tail blocks C1 63" skis include the VT, VS, VR, and VT+ tail blocks Rocket 65", 67", 69" skis include the VT, VS, and VR tail blocks

TAIL SHAPES

FIN ADJUSTMENT DETAILS

Depth adjustment is made using the thumb screws and makes the adjustment up or down directly.

STOCK Designed to offer a balanced tail depth through the turn and across the wake.

SQUARE A square tail shape that adds lift, support, and provides a clean release of water for speed.

ROUND The round tail lets the ski sit deeper in the water into the turn, adding control at higher speeds for quicker turns and reduced tail blow out.

ROUND TO SQUARE Allows the ski to ride deeper in the water on left turns and provides more tip pressure on right hand turns. This may benefit the skier on their onside and/or offside turns depending on their strength and style.

STOCK EXTENDER Allows the skier to transition from a 63” ski to a 65” ski by attaching the VT+ extender.

DFT is made using an allen key, but is also a direct adjustment forward or back, without the need to beat the fin into position.

6 // WATERSKIS

WATERSKIS // 7

CONNELLY SKIS

2025 DEALER BOOK

C1 The wait is over. Countless hours of athlete testing, extensive feedback and years of calculated modifications have led to the new C1. The C1 features a wider tip and tunnel, altered sidewall height in the tip and tail, and new flex and rocker patterns. Advanced geometry paired with tested technology like V-Tech and Versatail upholds Connelly’s 58- year legacy of innovation. Handcrafted at the Connelly Factory in the Pacific Northwest. SUGGESTED SPEED: 32-36 MPH

ROCKET With over 3 decades of changing the game for thousands of skiers, the new Rocket is ready to do it again! Based on the high performance C1, the Rocket offers a slightly wider platform for effortless speed, automatic turns and more stability. The Rocket is designed around Connelly’s signature features including the Versatail, which allows you to customize the ski to your style and preferences. SUGGESTED SPEED: 30-34 MPH

SIZES: 63" / 65" / 66" / 67" / 68"

SIZES: 65" / 67" / 69"

SKILL LEVEL

FLEX

FEATURES: • Made at the Connelly Factory in Washington • 63” includes VT, VS, VR, and VT+ Versatail blocks • 65", 66”, 67”, and 68” includes VT, VS, VR, VRS, and VSR Versatail blocks

FEATURES: • Versatail

• Closed cell polyurethane resin core • Performance glass flex sequence • C.A.P.T. (Connelly Advanced Profile Technology)

• Low density, CNC cut PVC core • 90/10 carbon/fiberglass layup

• C.A.P.T. (Connelly Advanced Profile Technology) • Hybrid base - polished tip, micro-textured tail • Speed V-Tech • Wide tunnel • Variable bevel

BINDING OPTIONS: • Double Tempest • Tempest w/Lace Adj. RTP

• Double Comp • Comp w/RTP

BINDING OPTIONS: • Double Tempest • Tempest w/Lace Adj. RTP

FIN: • Viper 2.0 Fin System w/Aluminum Foil

SKILL LEVEL

FLEX

• Double Comp • Comp w/RTP

PART NUMBERS: • Rocket 65 - Blank w/ Fin — #25604573 • Rocket 67 - Blank w/ Fin — #25604574 • Rocket 69 - Blank w/ Fin — #25604575

FIN: • VersaFin Fin System w/ Aluminum Foil

PART NUMBERS: • C1 63 - Blank w/ Fin — #60245053 • C1 65 - Blank w/ Fin — #60245055 • C1 66 - Blank w/ Fin — #60245056 • C1 67 - Blank w/ Fin — #60245057 • C1 68 - Blank w/ Fin — #60245058

BINDING LOCATION

RIDER WEIGHT ≤ 120 lbs 120 - 140 lbs 140 - 160 lbs 160 - 180 lbs ≥ 180 lbs

BINDING LOCATION

RIDER WEIGHT ≤ 160 lbs 160 - 200 lbs ≥ 200 lbs

SIZE

WIDTH

SIZE

WIDTH

63 " / 160 cm 65 " / 165 cm 66 " / 168 cm 67 " / 170 cm 68 " / 173 cm

6.61 " 6.66 " 6.76 " 6.86 " 6.96 "

27 ½ " 28 ⅜ " 28 ⅞ " 29 ⅜ " 29 ⅞ "

65 " / 165 cm 67 " / 170 cm 69 " / 175 cm

7.11 " 7.31 " 7.51 "

28 ⅛ " 29 ⅛ " 30 1/16 "

NOTES:

8 // WATERSKIS

WATERSKIS // 9

CONNELLY SKIS

2025 DEALER BOOK

ASPECT // MEN'S While other freeride skis can feel like you’re trying to turn a jump ski, the Aspect is as light and nimble under your feet as our high-end skis, just designed for slower speeds. Sharp bevels on a wide fore body set the ski higher in the water adding support on aggressive turns. V-Tech step base technology reduces drag and adds maneuverability making it easier to direct your ski. SUGGESTED SPEED: 26-32 MPH

ASPECT // WOMEN'S While other freeride skis can feel like turning a jump ski, the Women’s Aspect is as nimble under your feet as our high-end skis, just with a softer flex pattern and designed for slower speeds. Sharp bevels on a wide fore body set the ski higher in the water adding support on aggressive turns. V-Tech step base technology reduces drag and adds maneuverability making it easier to direct your ski. SUGGESTED SPEED: 26-32 MPH

SIZES: 65" / 67" / 69"

FEATURES: • Closed cell polyurethane resin core • Recreational glass flex sequence • C.A.P.T. (Connelly Advanced Profile Technology) • Polished speed base • V-Tech • Standard Tunnel • Variable bevel

FEATURES: • Closed cell polyurethane resin core • Women’s specific glass flex sequence • C.A.P.T. (Connelly Advanced Profile Technology) • Polished speed base • V-Tech • Standard Tunnel • Variable bevel

BINDING OPTIONS: • Double Tempest • Tempest w/Lace Adj. RTP • Double Shadow • Shadow w/Lace Adj. RTP • Swerve w/RTP

BINDING OPTIONS: • Double Tempest

• Tempest w/Lace Adj. RTP • Double Women's Shadow • Women's Shadow w/Lace Adj. RTP • Swerve w/RTP

SKILL LEVEL 5

FLEX

SKILL LEVEL 5

FLEX

FIN: • Aluminum Drop Through Fin

PART NUMBERS: • Aspect 65 - Blank w/ Fin — #60245164 • Aspect 67 - Blank w/ Fin — #60245165 • Aspect 69 - Blank w/ Fin — #60245166

PART NUMBERS: • Womens Aspect 65 - Blank w/ Fin — #60245145 • Womens Aspect 67 - Blank w/ Fin — #60245146

BINDING LOCATION

RIDER WEIGHT ≤ 180 lbs 180 - 220 lbs ≥ 220 lbs

BINDING LOCATION

RIDER WEIGHT

SIZE

WIDTH

SIZE

WIDTH

65" / 165 cm 67" / 170 cm 69" / 175 cm

7.46" 7.66" 7.76"

28 ⅛" 29 ⅛" 30 1/16"

65" / 165 cm 67" / 170 cm

7.46" 7.66"

28 ⅛" 29 ⅛"

≤ 150 lbs ≥ 140 lbs

NOTES:

10 // WATERSKIS

WATERSKIS // 11

CONNELLY SKIS

2025 DEALER BOOK

OUTLAW We were the first to design wide shaped skis because we know you don’t need to be a high-end buoy chaser to enjoy waterskiing. A wide tip and tail contributes to less effort getting up and out of the water. A narrow design under the bindings and a high-end construction keep the ski responsive, lively, and fun. The Outlaw is backed by the industry’s only Performance Guarantee. Don’t like it? We’ll take it back no questions asked. SUGGESTED SPEED: 26-32 MPH

BIG DADDY Larger skiers will appreciate the Big Daddy’s 550 in² of surface area. A wide tip and tail, combined with C.T.S. (Connelly Tracking System), allows for effortless deep water starts. The narrow underfoot design and forgiving flex pattern provides smooth performance at speeds 28 mph and under. The Big Daddy works so well we offer the industry’s only Performance Guarantee. SUGGESTED SPEED: 24-28 MPH

BIG EASY

SHORTLINE The Shortline is a proven shaped slalom design modeled after our Outlaw ski. The shaping assists in the turns and makes for an overall easier skiing experience. Features such as C.T.S. (Connelly Tracking System) paired with extra surface area help with deep water starts and also provide overall stability. Reinforcement rods are used to stiffen the ski for better slalom performance. SUGGESTED SPEED: 24-28 MPH

SUGGESTED SPEED: 24-28 MPH

In 1994 we introduced a ski intended to make slalom skiing fun for everyone. Now, we have revived one of the finer inventions of the 90’s, the revolutionary Big Easy. Why waste energy getting out of the water? On the Big Easy you can pop right up and ski all day long. The massive 635 in 2 platform is the widest ski on the market and offers unmatched stability.

SIZE: 67"

SIZES: 65" / 67" / 69"

SIZE: 69"

SIZE: 67"

FEATURES: • C.A.P.T. (Connelly Advanced Profile Technology) • The original “Big Guy” ski

FEATURES: • Closed cell polyurethane resin core • Recreational glass flex sequence • C.A.P.T. (Connelly Advanced Profile Technology) • Acrylam base • Standard Tunnel

FEATURES: • World famous “Big Guy” ski

FEATURES: • Reinforced composite construction • C.T.S. (Connelly Tracking System) • High gloss UV coat • Standard Tunnel

• Closed cell polyurethane resin core • Recreational glass flex sequence • C.A.P.T. (Connelly Advanced Profile Technology) • C.T.S. (Connelly Tracking System) • Polished base • Standard Tunnell

• Closed cell polyurethane resin core • Recreational glass flex sequence • Acrylam base • Standard Tunnel

BINDING OPTIONS: • Swerve w/RTS

BINDING OPTIONS: • Double Tempest • Tempest w/Lace Adj. RTP • Double Shadow • Shadow w/Lace Adj. RTP • Swerve w/RTP

BINDING OPTIONS: • Swerve w/RTP

BINDING OPTIONS: • Shadow w/Lace Adj. RTP • Swerve w/ RTP

FIN: • Aluminum Drop Through Fin

PART NUMBER: • Shortline 67 - Swerve w/RTS & Rope — #61240302 • Shortline 67 - Swerve w/RTS L/XL — #61240300

FIN: • Aluminum Drop Through Fin

PART NUMBER: • Big Easy 67 - Blank w/ Fin — #60245041

FIN: • Aluminum Drop Through Fin

PART NUMBER: • Big Daddy - Blank w/ Fin — #60244716

PART NUMBERS: • Outlaw 65 - Blank w/ Fin — #60245248 • Outlaw 67 - Blank w/ Fin — #60245165 • Outlaw 69 - Blank w/ Fin — #61240336

SKILL LEVEL 1

SKILL LEVEL 3

FLEX

SKILL LEVEL 2

FLEX

SKILL LEVEL 1

FLEX

BINDING LOCATION

RIDER WEIGHT ≤ 180 lbs 180 - 210 lbs ≥ 210 lbs

BINDING LOCATION

RIDER WEIGHT

BINDING LOCATION

RIDER WEIGHT

SIZE

WIDTH

SIZE

WIDTH

SIZE

WIDTH

SIZE

WIDTH

28 11 /

16 "

65" / 165 cm 67" / 170 cm 69" / 175 cm

7.83" 8.03" 8.55"

29 ⅞" 31" 31 13/16"

69" / 175 cm 550 in² / 3500 cm²

9.99"

≥ 220 lbs

67" / 170 cm 635 in² / 4100 cm²

11.56"

31 ¼"

≥ 220 lbs

67" / 170 cm

7.95"

Most Weights

NOTES:

12 // WATERSKIS

WATERSKIS // 13

CONNELLY SKIS

2025 DEALER BOOK

SKI BINDINGS

COMP The Comp is the ultimate rubber binding for aggressive skiers. Featuring a taller, stiffer overlay, additional lateral stiffening and 3D contoured footbed. The additional support offered by the firm overlay and contoured heel cup create an absolute connection with the ski, placing the Comp at the top of its class. The front toe strap reduces lift, supports the foot and is adjustable for dialing in exactly the right fit. Toe and heel rubbers are lined with soft Neoprene and the edges are rolled in Lycra for extra comfort and ease of entry.

SIZES (US - MENS): XS(4-5) / S (5-7) / M (8-9) / L (10-11) / XL (12-13)

PART NUMBERS: • Comp Front - XS — #64232869 • Comp Front - S — #64232870 • Comp Front - M — #64232871 • Comp Front - L — #64232872 • Comp Front - XL — #64232873 • Comp Rear - XS — #64232874 • Comp Rear - S — #64232875 • Comp Rear - M — #64232876 • Comp Rear - L — #64232877 • Comp Rear - XL — #64232878

NOTES:

TEMPEST The Tempest binding now features Gaia foam, for improved fit and a softer feel against your skin. 3D molding increases rigidity in key areas for added response, creating a better connection between you and your ski. Dual lace zones let you customize fit over the top of your foot and around your ankle. Our molded toe features a stretch panel that ensures it stays flush on any foot whether it’s narrow, wide, tall, or short. New Gaia Foam Liner: Soft & Cushy Feel

COMP CONSTRUCTION

[A] OVERLAY Our tallest, stiffest overlay for maximum support.

[A]

SIZES (US - MENS): S(4-7) / M (7-9) / L (9-11) / XL (12-14)

[B] ADJUSTABLE TOE STRAP Adjustable toe strap provides forefoot stability.

PART NUMBERS: • Tempest Front - S — #25642828 • Tempest Front - M — #25642829 • Tempest Front - L — #25642830 • Tempest Front - XL — #25642831 • Tempest Rear - S — #25642831 • Tempest Rear - M — #25642833 • Tempest Rear - L — #25642833 • Tempest Rear - XL — #25642835

[B]

[C] EVA TOE PIECE 3D molded EVA toe piece provides more support and control than rubber, with no pressure points.

[C]

[D]

[D] HEEL PANELS Strategically shaped and placed stiffening panels for increased lateral support and control.

[E]

NOTES:

[E] FOOTBED 3D contoured footbed with arch support constructed with dual density EVA foam.

14 // SKI BINDINGS

SKI BINDINGS // 15

CONNELLY SKIS

2025 DEALER BOOK

SHADOW // MEN'S By far our most user-friendly design, the Shadow binding uses a stretch panel in the toe which can expand or compress to ensure proper fit for a wide variety of sizes. The Lycra lined toe and heel wrap are molded to fit snug without causing pressure points. Our soft EVA footbed is set in a super-lite plate to keep you comfortable behind the boat.

SWERVE This one size fits all warrior features an elastomer wrap to conform to the contours of your feet more easily. The EVA heel and Lycra lined floating toe are soft and adjustable for various foot sizes. Laces can be loosened to open the binding wide, which makes it easy to slip on and off. Pull the lace to fit and engage the wheel lock and you are ready to ski.

SIZES (US - MENS): S/M(5-11) / L/XL (9-14)

SIZE: ONE SIZE FITS MOST

PART NUMBERS: • Shadow Front - S/M — #64242427 • Shadow Front - L/XL — #64242428 • Shadow Rear - S/M — #64242429 • Shadow Rear - L/XL — #64242430

PART NUMBER: • Swerve Front S-XL — #64202798

LACE ADJ. R.T.P. // MEN'S & WOMEN'S The Lace Adjustable RTP perfectly complements the Shadow front binding. A Lycra lined floating toe accommodates a wide range of foot sizes and the soft EVA footbed is shaped for outstanding grip and comfort. Slide your foot in, tighten the lace and you are ready to ski.

SHADOW // WOMEN'S The Women’s Shadow adds a little flash to a comfortable, supportive design. A Lycra lined toe and heel wrap are molded to fit snug without causing pressure points. Laces can be loosened to open the binding wide, which makes it easy to step in and out. The floating toe will accommodate large and small foot sizes alike. The soft EVA footbed is set in our lightweight plate design for a responsive bond between you and your ski.

SIZE: ONE SIZE FITS MOST

PART NUMBERS: • Lace ADJ RTP — #64242845 • WMNS Lace ADJ RTP — #25642846

SIZES (US - WOMENS): S/M(6-12)

PIVOT R.T.P. The perfect companion to a front Stoker binding. The Pivot RTP features slots in the plate that allow you to change the angle it’s mounted to on the ski. A cushy EVA footbed complete with heel cup and raised toe humps keep your foot comfortable and in place. No moving parts, just a wrap and overlay, make it nice and simple to slide your foot in and go.

PART NUMBERS: • Shadow Front - S/M — #25642839 • Shadow Rear - S/M — #25642840

SIZES (US - MENS): XS(3-4) / S (5-6) / M (7-10) / L (9-12) / XL (11-14)

STOKER The Stoker binding features a taller wrap than earlier versions for increased hold and more lateral support. A front strap reduces toe lift and supports the front of the foot. Both wraps are adjustable for dialing in exactly the right fit. Toe and heel rubbers are lined with soft neoprene and the edges are rolled in Lycra for extra comfort and ease of entry.

PART NUMBERS: • Pivot RTP - XS — #64000955 • Pivot RTP - S — #64000956 • Pivot RTP - M — #64000957 • Pivot RTP - L — #64000958 • Pivot RTP - XL — #64000959

SIZES (US - MENS): XS(4-5) / S (5-7) / M (8-9) / L (10-11) / XL (12-13)

SWERVE R.T.P. // MEN'S & WOMEN'S

PART NUMBERS: • Stoker Front - XS — #64202394 • Stoker Front - S — #64202395 • Stoker Front - M — #64202396 • Stoker Front - L — #64202397 • Stoker Front - XL — #64202398 • Stoker Rear - XS — #64202399 • Stoker Rear - S — #64202400 • Stoker Rear - M — #64202401 • Stoker Rear - L — #64202402 • Stoker Rear - XL — #64202403

You can’t swerve without a Swerve RTP. The fully adjustable toe can accommodate a wide range of sizes for ultimate comfort and fit.

SIZE: ONE SIZE FITS MOST

PART NUMBER: • Swerve RTP — #64222799

16 // SKI BINDINGS

SKI BINDINGS // 17

CONNELLY SKIS

2025 DEALER BOOK

ADULT COMBO SKIS

VOYAGE The Voyage combo pair uses a traditional shape with a slightly wider frame, specifically under the bindings and going back to the tail end. The extra surface area makes getting up and out of the water easier while providing you with stability to perfect your balance and stance. Step base technology through the bottom tunnels reduces drag and gives the skis a maneuverable feeling.

QUANTUM The Quantum will bring a combo of energy and value to your ride. The wide tails and shallow narrow tunnels make deep water starts easier and provide riders with even turns. Our slide-type adjustable bindings fit a wide range of foot sizes, as does the proven ski design. Beginners can attach the included stabilizer bar for extra help in keeping the skis straight and the proper width apart while more advanced skiers can fly and cut effortlessly.

SIZES: 64" /68"

SIZE: 68"

FEATURES: • Reinforced composite construction • C.T.S. (Connelly Tracking System) • Step base technology for less drag • Beveled tips for turn initiation

FEATURES: • Reinforced composite construction • Stabilizer bar inserts • Standard Tunnel

ECLYPSE The Eclypse is our premier combo set designed to make skiing easier and more fun for all ages and skill levels. The wide nose and tail make deep water starts easier and the narrow waist keeps the ski lively out on the water. Fit with our easy-to-use Swerve binding, with a contour conforming elastomer outer wrap, this combo pair will keep the whole family smiling.

BIG EASY The ultimate “big guy” combo skis. Big surface area on both skis make for quick easy starts for the big guy. Bigger is Better and this set of combos is BIG.

• High gloss UV coat • Stabilizer bar inserts • Standard Tunnel

BINDING OPTIONS: • Slide-Type Adjustable

FIN: • Glass Filled Nylon

BINDING OPTIONS: • Slide-Type Adjustable

SIZE: 67"

PART NUMBER: • Quantum - Slide Adj — #61240342

FIN: • Glass filled nylon

FEATURES: • Reinforced composite construction • High gloss UV coat • Double Tunnel

FEATURES: • Reinforced composite construction • C.T.S. (Connelly Tracking System) • High gloss UV coat • Standard Tunnel

PART NUMBERS: • Voyage 64 - Slide Adj — #61240312 • Voyage 68 - Slide Adj — #61240313

BINDING OPTIONS: • Slide-Type Adjustable

BINDING OPTIONS: • Swerve w/ RTS

FIN: • Glass Filled Nylon

FIN: • Aluminum Drop Through Fin

PART NUMBER: • Big Easy Combo — #25610310

PART NUMBER: • Eclypse - Swerve Lace Adj — #61240303

RIDER WEIGHT

SIZE

FOOT SIZE

SIZE

FOOT SIZE

64” / 163 cm 68” / 173 cm

≤ 150 lbs ≥ 120 lbs

9 - 14 9 - 14

68" / 173 cm

135 - 240 lbs

9 - 14

NOTES:

RIDER WEIGHT

SIZE

FOOT SIZE

SIZE

FOOT SIZE

67" / 170 cm

≤ 275 lbs

Most Sizes

67" / 170 cm

< 300 lbs

9 - 14

18 // ADULT COMBO SKIS

ADULT COMBO SKIS // 19

CONNELLY SKIS

2025 DEALER BOOK

KID'S COMBO SKIS

CADET The Cadet trainers will set your aspiring skier up for success. A removable stabilizer bar, with direct rope attachment, helps to keep the front and back end of the skis in place while taking some load off of your kiddo. The two handle Cadet rope allows an adult to safely control the pull from the boat and in case of a fall, just let go! Your little cadet will actually have FUN learning with these skis.

FIRECRACKER A single piece “U” shaped design provides youngsters with the most stable platform to learn the basics of skiing. The integrated two handle rope system is held by a spotter and connects directly to the platform and then extends to the rider. This eliminates the burden of holding yourself up on starts, and the spotter can drop the handle to release the rider when they’re done.

SIZE: 48"

SIZE: 45"

FEATURES: • Bamboo construction • Stable U-shaped trainer • Firecracker rope w/boat-side safety handle

FEATURES: • Reinforced composite construction • C.T.S. (Connelly Tracking System) • High gloss UV coat • Removable stabilizer bar w/rear strap • Cadet rope w/boat-side safety handle

BINDING OPTIONS: • Foot Strap w/ Traction Pad

BINDING OPTIONS: • Child Slide-Type Adjustable

PART NUMBER: • Firecracker Trainer — #61240317

FIN: • Glass Filled Nylon

SUPER SPORT Build confidence in smaller, lighter riders with properly sized gear that offers a more enjoyable ride. The Super Sport features our shaped ski concept with wide tip and tail for easier deep water starts. Beginners can also use the included front stabilizer bar to keep the skis in line and the proper distance apart. Remove the bar once they learn the basics to utilize the full performance of the skis.

PART NUMBERS: • Cadet - Child Slide Adj — #61240310

SIZES: 55"

FEATURES: • Reinforced composite construction • C.T.S. (Connelly Tracking System) • High gloss UV coat • Removable stabilizer bar

BINDING OPTIONS: • Junior Slide-Type Adjustable

FIN: • Glass filled nylon

RIDER WEIGHT

SIZE

FOOT SIZE

SIZE

FOOT SIZE

SIZE

FOOT SIZE

PART NUMBERS: • SUPSPOPAIR - Jr Slide Ajd — # 61240306

55" / 140 cm

≤ 135 lbs

4-9

45" / 115 cm

≤ 80 lbs

1-4

48" / 122 cm

≤ 85 lbs

1 - 4

NOTES:

20 // KID'S COMBO SKIS

KID'S COMBO SKIS // 21

CONNELLY SKIS

2025 DEALER BOOK

KNEEBOARDS

BOOST The Boost’s ability to fly high, carve hard, and respond quickly gives this board the name it deserves. While cruising over the waterways, the compression molded construction creates a premium experience that will last. The thin profile and rigid build make the Boost reliable and responsive without taking away from the overall performance. The super-soft, plush EVA kneepad keeps your lower extremities comfortable so you can stay on the water longer.

THEORY The Theory is fully equipped with all the bells and whistles you’ve come to love in a kneeboard. The plush kneepad and padded Velcro strap are ergonomically shaped to provide comfort to you while riding. Whether you are an expert or simply looking to try out a new sport, this board design was made for you. New riders can utilize the front handle hook on deep water starts, which frees up both hands while getting set in place. This Theory has been proven to be fun!

MIRAGE The Mirage combines a high performance, twin tip shape with a long side-cut radius to make for a stable, forgiving ride. The built-in handle hook makes learning this unique sport effortless. Simply set the rope in the front hook while adjusting your knees into position. Secure yourself into the plush kneepad with an adjustable Velcro strap while the board holds the handle for you. Pick the handle back up when you are ready to get your kneeboarding on.

SIZE: 53" / 135 cm

SIZE: 50" / 127 cm

SIZE: 53" / 135 cm

FEATURES: • Compression molded • Low profile, twin tip design • Soft EVA contoured pad • Lightweight, high performance fiberglass build • Edge rails for tracking • Plush knee strap

FEATURES: • Roto-Molded • Twin tip design • Front handle hook • Center channel and edge rails for tracking • Low profile molded fins in tip and tail • Soft EVA contoured pad • Plush knee strap

FEATURES: • Roto-Molded • Twin tip design • Front handle hook • Soft EVA contoured pad • Plush knee strap

PART NUMBER: • Mirage Kneeboard — #65210040

PART NUMBER: • Boost Kneeboard — #25650049

PART NUMBERS: • Theory Kneeboard — #65230047

WILD THING Look there in the water! It’s a body board, it’s a wakesurf, it’s a kneeboard! No, it’s the Connelly Wild Thing. The Wild thing can do all of that and more. User friendly features like two ergonomically placed handles and a front towrope hook will have the entire family shredding across the wake in no time.

SIZE: 59" / 151 cm"

FEATURES: • Durable rotomolded construction • Ergonomic integrated molded handles • Integrated front towrope hook for hands free riding at any age • Soft contoured EVA pad provides traction and comfort for laying, kneeling, and standing. • Multi-sport design

PART NUMBERS: • Wild Think Kneeboard – # 65240042

NOTES:

22 // KNEEBOARDS

KNEEBOARDS // 23

CONNELLY SKIS

2025 DEALER BOOK

WAKEBOARDS

CORE MATERIAL

ROCKER

NATURAL FLEX CNC cut Paulownia wood core. No foam, 100% natural. SYSTEM 80 A light density closed cell foam with forgiveness to perform at all levels.

CONTINUOUS Smooth, fast, and predictable ride with softer landings. More rocker between the bindings with less abrupt transitions to nose and tail.

Uninterrupted, smooth curve from tip to tail

SUBTLE 3-STAGE Blends the pop of a 3-Stage rocker with the smooth predictability of continuous.

Steeper kick

Mellow center section

Steeper kick

BASE SHAPE

BASE MATERIAL

FULL SPINE Displaces water to the toe and heel edge of the board to soften landings. HYBRID SPINE A spine with a flat top. Maintains an overall flat base surface for riding over features. FLAT BASE Completely flat base, best for use on features and kickers.

TI Possibly the worlds strongest/slickest material formulated specifically for blistering speed. SMORG Laminated Nexus shell with UV protection, lightweight and durable.

BOARD CONSTRUCTION

[A] TOP GRAPHIC Provides graphics as well as a layer of UV protection. Not only does this layer keep your gear looking good, it adds to the life of your board. [B] FIBER REINFORCED LAYERS Aside from the core, this is where we really dial in how a board rides. Different fiberglass weights, orientations, weaves, and layers determine a board’s flex characteristics and overall performance. [C] BOOT REINFORCEMENT This layer of glass reinforces the connection between your board and boots, transferring response from you to your board without any energy loss. [D] BOOT INSERTS All our boards use M6 metric inserts giving you more threads in a smaller area. This allows for a more secure connection with a shallower insert. [E] CORE The core material is the backbone of each board and gives the fiberglass a base to add structure to. Different foam densities, inlays, and materials dictate how a board performs depending on its intended use. [F] ABS RAILS The Steel, Groove and Woodro are equipped with ABS sidewalls. This incredibly robust material increases durability and protects the edge of the board from dings and dents when riding on rails and features. [G] BASE GRAPHIC More than just UV protection and a pretty picture, the base adds a layer of strength, durability, and performance.

BOARD SELECTION CHART

[A]

[B]

ABRUPT

[C]

[D]

[E]

[B]

[F]

POP

[G]

SMOOTH

SKILL LEVEL

EXPERT

BEGINNER

24 // WAKEBOARDS

WAKEBOARDS // 25

CONNELLY SKIS

2025 DEALER BOOK

BIG EASY It’s the longest in the range at 146 cm and the definitive board for the larger rider. Stop messing around on a board that isn’t right for you. Hop on the Big Easy and pull yourself out of the water with ease. The full spine and 3 stage rocker will allow you to stomp new tricks. Ride longer, smile more, be less sore at the end of the day, sleep and then repeat.

REVERB The Reverb has turned into the unofficial Connelly team board. This shape has the ability to work with any riding style, whether it’s super technical or laid back and stylish. The deep center channel sets you slightly lower in the water, increasing edge hold while carving into the wake. A subtle 3-stage rocker provides pop off the lip of the wake. The full-length center spine and variable rocker lines make hard, flat landings easier to set down.

PURE

BLAZE From early morning progression sessions to late afternoon sets with the family, the Blaze has you covered. A deep center fin and long base molded fins provide excellent tracking for people learning the sport. The smooth carving edge rail is consistent and predictable on edge, and the subtle 3-stage rocker pattern is poppy off the lip of the wake.

The concept with the Pure was to use a proven design based off our experience making boards for brand new riders as well as wakeboarding’s top pros. The mellow 3-stage rocker pattern is blended for the perfect combination of predictability and pop off the wake. The base uses long molded fins and rail channels that help the board track. A removable 1.9’’ center fin can be added for superior board tracking.

SIZE: 146 cm

SIZE: 141 cm

SIZES: 131 cm / 136 cm / 141 cm

SIZE: 130 cm / 134 cm / 141 cm

FEATURES: • System 80 core • Deep center channel for control • Full spine • Subtle 3-stage variable rocker • 4 long base molded fins • 2 bolt on 1” composite center fins

FEATURES: • System 80 core • Deep center channel for control • Full spine • Subtle 3-stage variable rocker • 4x4 molded fins • 2 bolt on 1” plastic center fins

FEATURES: • Easy stable ride for beginners • System 80 core • Full spine • 4 long base molded fins • 2 bolt on 1.9” center skater fins

PART NUMBERS: • Pure 130 - Blank w/Fins — #25624255 • Pure 134 - Blank w/Fins — #25624256 • Pure 141 - Blank w/Fins — #25624257

PART NUMBERS: • Big Easy 146 - Blank w/Fins — #25624491

PART NUMBERS: • Blaze 141 - Blank w/Fins — #25660060

PART NUMBERS: • Reverb 131 - Blank w/Fins — #25624038 • Reverb 136 - Blank w/Fins — #25624039 • Reverb 141 - Blank w/Fins — #25624040

SKILL LEVEL

SKILL LEVEL 4

SKILL LEVEL 6

POP

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

SIZE

146 cm

17.05"

10.83"

2.65"

≥ 160 lbs

131 cm 136 cm 141 cm

16.62" 16.85" 17.05"

10.67" 10.70" 10.83"

2.47" 2.49" 2.57"

≤ 130 lbs ≤ 150 lbs ≥ 140 lbs

130 cm 134 cm 141 cm

16.50" 16.90" 16.90"

9.00" 10.09" 10.09"

2.50" 2.80" 2.95"

≤ 130 lbs ≤ 150 lbs ≥ 140 lbs

141 cm

16.90"

10.09"

3.11"

≥ 140 lbs

NOTES:

26 // WAKEBOARDS

WAKEBOARDS // 27

CONNELLY SKIS

2025 DEALER BOOK

SURGE Kids looking to up their game need look no further; the Surge has all you need to get on the right track. The subtle 3-stage rocker is designed to give a little extra lift off the wake at slower speeds to build confidence for young riders. The 4x4 molded fins provide moderate grip and the removable center fin helps the board track straight without a lot of extra work.

WILD CHILD The Wild Child has been the weapon of choice for some of the best athletes in watersports. A deep center channel sets this board slightly lower in the water for rider control. A full-length center spine offers super soft landings, even when you land in the flats. 4x4 molded fins and a removable 1’’ center fin lets you dial in grip exactly how you like.

LOTUS The Lotus is regarded as one of the best shapes for learning and progressing your wakeboarding. Long base molded fins add traction without drag, and a removable center fin can be used for ultimate grip. The subtle 3-stage rocker line is blended to be smooth carving into the wake and poppy off the lip. It’s the perfect balance of predictability and explosive performance.

WOODRO The Woodro uses a 100% wood core for its innate and general feel-good ability to connect riders with the features they are on. This board has buttery smooth flex over any obstacle and the Ti base provides fluid motion and long-lasting durability. Independent channels run near the edge of the board under the feet for just the right amount of tracking.

SIZE: 125 cm

SIZES: 131 cm / 136 cm

SIZE: 130 cm / 134 cm

SIZE: 140 cm / 146 cm

FEATURES: • Easy, stable ride for kids • System 80 core • Full spine • 4x4 molded fins • 2 bolt on 1.7” center skater fins

FEATURES: • Deep center channel for control • System 80 Core • Full length center spine • Subtle 3-stage variable rocker • 4x4 molded fins • 2 bolt on 1” composite center fins

FEATURES: • Blended performance and stability • System 80 core • Full spine • Enhanced edge channel for stability • Subtle 3-stage rocker • 2 bolt on 1.7” center Skater fins PART NUMBERS: • Lotus 130 - Blank w/Fins — #25624082 • Lotus 134 - Blank w/Fins — #25624083

FEATURES: • Jib profile • Natural flex core • Flat Ti base

• 0.7” ABS sidewalls • Continuous rocker • 4 bolt on .75” slider fins

PART NUMBERS: • Surge 125 - Blank w/Fins — #62244057

PART NUMBERS: • Wild Child 131 - Blank w/Fins — #25624072 • Wild Child 136 - Blank w/Fins — #25624073

PART NUMBERS: • Woodro 140 - Blank w/Fins — #25624099 • Woodro 146 - Blank w/Fins — #25624100

SKILL LEVEL 2

SKILL LEVEL

SKILL LEVEL 4

POP

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

CENTER WIDTH

TIP/TAIL WIDTH

ROCKER HEIGHT

RIDER WEIGHT

SIZE

125 cm

15.69"

9.50"

2.15"

≤ 130 lbs

131 cm 136 cm

16.62" 16.85"

10.67" 10.70"

2.47" 2.49"

≤ 130 lbs ≥ 120 lbs

130 cm 134 cm

16.50" 16.90"

9.00" 10.09"

2.50" 2.80"

≤ 140 lbs ≥ 130 lbs

14o cm 146 cm

17.63" 17.70"

13.09" 13.16"

2.32" 2.44"

≤ 160 lbs ≥ 150 lbs

NOTES:

28 // WAKEBOARDS

WAKEBOARDS // 29

CONNELLY SKIS

2025 DEALER BOOK

WAKE BINDINGS

DRAFT All the bells and whistles of our top-end pro boots with an open toe design. Utilizing the industry’s lightest, strongest, best fitting Infinity Plate System the Draft boots transfer more energy from your feet to the board for added response. Dual lace zones guarantee flawless fit over the top of your foot and ankle with an impact strap that draws your heel into an ergonomically formed heel pocket for near telekinetic control over your board.

SIZES: (US - MENS): S (5-8) / M (8-10) / L (10-12) / XL (12-14)

FEATURES: • Open toe pro style boot • Infinity Plate for lightest, strongest foundation • Impact strap integrated with lower lace • Deep heel pocket with built in Achilles pads • Dual lace design • Gorilla Grip

PART NUMBERS: • Draft - S — #64242806 • Draft - M — #64242807 • Draft - L — #64242808 • Draft - XL — #64242809

FACTION If you are looking for a professional caliber boot with more support, this boot is for you. The Faction is taller and slightly stiffer than the SL. Feel the backing of a Cush liner with shock pads and boost your riding to the next level. Because we all appreciate a little more support, right?

EMPIRE The Empire boot design can accommodate a wide array of foot sizes with a liner that stretches out or cinches down to the desired fit. An easy to use single lace pulls your heel back into an ergonomically shaped pocket for pro-style response. Our Infinity Plate chassis is the strongest in the industry and is fitted with a cushy EVA footbed to protect from heel bruises on hard landings.

SIZES: (US - MENS): XS (6-8) / S (8-9) / M (9-10) / L (10-11) / XL (11-12) / XXL (12- 13)

SIZES: (US - MENS): S/M(5-8) / L/XL (9-12) / XXL (12-14)

FEATURES: • Supportive design • Infinity plate for lightest, strongest foundation • Impact strap integrated with lower lace • Cush liner with shock pads • Deep heel pocket with built in Achilles pads • Dual lace design • Gorilla grip

FEATURES: • Easy to use open toe boot • Infinity Plate for lightest, strongest foundation • Single piece Cush liner • Deep heel pocket with Achilles pads • Lace adjustable • Gorilla Grip

PART NUMBERS: • Faction - XS — #64222724 • Faction - S — #64222725 • Faction - M — #64222726 • Faction - L — #64222727 • Faction - XL — #64222728 • Faction - XXL — #64222729

PART NUMBERS: • Empire - S/M — #25642866 • Empire - L/XL — #25642867 • Empire - XXL — #25642868

NOTES:

30 // WAKE BINDINGS

WAKE BINDINGS // 31

CONNELLY SKIS

2025 DEALER BOOK

VENZA The Venza matches the step-above performance aspects of the Pure when compared to the competition. Designed to fit a wide variety of foot sizes these are the perfect boot to have on any boat for friends and family to ride. New upper lace loop for easier entry and more customizable fit. New cut over the top of the foot for a more even pressure distribution as the laces are tightened. The high wrap outer boot offers standalone response and performance while the soft Lycra liner is comfortable for riders at any skill level.

KARMA The Karma boot design can handle a wide array of foot sizes with a liner that stretches out or compacts down to the desired fit. An easy-to-use single lace cinches you back into an ergonomically shaped heel pocket for pro-style response. Our Infinity Plate chassis is the strongest in the industry and is fitted with a cushy EVA footbed to protect from heel bruises on hard landings.

SIZES: (US - MENS): S/M(5-8) / L/XL (9-12) / XXL (12-14)

SIZES: (US - WOMENS): S/M(4-7) / L/XL (7-10)

FEATURES: • Easy to use open toe boot • Thick EVA footbed • Lycra lined molded heel and toe • Built in Achilles pads • Dual lace design with open upper loop for easy entry • Gorilla grip • 6-Plate

FEATURES: • Easy to use open toe boot • Infinity Plate for lightest, strongest foundation • Single piece Cush liner • Deep heel pocket with built in Achilles pads • Lace adjustable • Gorilla grip

PART NUMBERS: • Venza - S/M — #25642738 • Venza - L/XL — #25642739 • Venza - XXL — #25642740

PART NUMBERS: • Karma - S/M — #25642810 • Karma - L/XL — #25642811

OPTIMA // MEN'S Ease of entry, comfort, and style is what the Optima boot is all about. The Lycra lined heel and toe make the boot easy to step in and a single lace system encloses the boot around your foot like it was molded just for you. This is a super-light design that fits a wide variety of sizes.

OPTIMA // WOMEN'S The Women’s Optima features a balance of comfort, fit, and ease of entry. The Lycra lined heel and toe make the boot easy to step into and a single lace system encloses the boot around your foot like it was molded just for you. This is a super light design that fits a wide variety of sizes.

SIZES: (US - MENS): XS (6-8) / S/M (5-8) / L/XL (9-13)

FEATURES: • Easy to use open toe boot • Thick EVA footbed • Lycra lined molded heel and toe • Lace adjustable • Gorilla grip • 6-Plate PART NUMBERS: • Optima - XS — #25642750 • Optima - S/M — #25642751 • Optima - L/XL — #25642752

SIZES: (US - WOMENS): S/M(3-6) / L/XL (7-10)

FEATURES: • Easy to use open toe boot • Thick EVA footbed • Lycra lined molded heel and toe • Lace adjustable • Gorilla grip • 6-Plate

HALE The Hale boot is a great option for the family who wants a setup that works for a variety of foot sizes. The soft EVA heel and Lycra lined floating toe are comfortable and easily adjustable. Loosen the laces and the boots open wide making them easy to slip on and off. Pull the lace snug, engage the wheel lock, and you’re ready to ride.

PART NUMBERS: • Women's Optima - S/M — #25642800 • Women's Optima - L/XL — #25642801

SIZE: ONE SIZE FITS MOST

FEATURES: • Easy to use open toe boot • Soft EVA footbed • Lycra lined floating toe/EVA heel • Lace adjustable • Gorilla grip • 6-Plate

NOTES:

PART NUMBERS: • Hale - OSFM — #64232763

32 // WAKE BINDINGS

WAKE BINDINGS // 33

CONNELLY SKIS

2025 DEALER BOOK

WAKESURFERS

CONSTRUCTION

SKELECORE Skelecore is our advanced core shaping technique that reduces overall core mass, allowing the fibers of the board to react quicker and more naturally.

COMPRESSION We use compression molding for its ability to produce thin boards that are rigid and durable. Skilled skim riders and beginners alike utilize their sharp rail for board control.

EVA Foam pad/Ghost grip Top graphic 2 Layer fiberglass EPS Skelecore

EVA Foam pad Top graphic 2 Layer fiberglass EPS Foam or PU core 2 Layer fiberglass Base graphic

Full length wood stringer 2 Layer fiberglass

Base graphic/Specialty fibers

EPOXY Surfboard shapers have been using this construction method for ages. It produces the extremely light, buoyant, responsive board that surfers love to ride. This type of construction allows for nearly any shape you can think up. The possibilities are endless.

THERMO SHELL Thermo Shell construction offers the durability of a compression molded board and the freedom to shape like a high- performance epoxy surfer. It’s strong, light, and built to shred.

STYLE

TAIL SHAPE

SURF Surf styles use a multitude of rail shapes, board outlines, and fin setups to produce different riding styles and skill levels. There’s more than one way to ride a wave and we recommend trying them all. CRUISE For riders just looking to get on the water and hit that flow state, our cruiser boards are the perfect match. Cruisers will have a thicker profile and more rounded rail than a hybrid. HYBRID Hybrid surf designs generally have a thin profile, somewhat sharp rail, and a deeper surf style fin. The result is a fast acting, responsive board that can carve a mean line as well. SKIM Skim boards are designed to rely more on the rail and less on the fins for control. The loose, skate inspired aspects of a skim style make spins, ollies and shuvits much easier than thick boards with beefy fins. QUAD The need-for-speed fins setup. Two front fins are accompanied by two smaller rear fins. Both sets are flat foil, which allows for water to pass through the centerline without resistance while the curved outer surface creates lift and hold into the face of the wave. TRI Possibly the most common surf fin setup of all time. A large center fin provides superior tracking while the two flat foil side fins generate speed and hold in the face of the wave. TWIN With no center fin there’s less resistance through the middle of the board, which allows for more speed and makes it easy to break free on a slash while still being grippy enough to hold on the bottom turn. SKATE This fin setup has been used in our line since we started making surfers. This bolt-through style is reliable, easy to use and customizable. Use all three fins for a stable ride, remove the center fin for a twin fin feel, or pull the side fins for a skim style setup. SKIM For those that like to play it fast and loose, this setup releases super easy and makes tricks like spinning and ollies easy to initiate.

SQUARE Square tails are wide and offer a lot of surface area for a stable platform. They take a little more time to transition edges, making them perfect for beginners. ROUND The all-around performance shape. Water wraps around the curve of the tail increasing traction, and the larger surface area keeps the board high on the water for maneuverability. DIAMOND Similar surface area compared to round tails keeps this shape high and maneuverable. The angle created at the rear part of the rail releases water for a faster overall feel. FANG This shape allows for a longer rail in the tail of the board with less volume. In conjunction with the channels on the base of the board, water releases from these points for a fast and loose feel . FISH The two points of the fish tail act as two separate tails. Water flows along the rail to the furthest point back on the board for a stable ride. Removing the space between the tips keeps it maneuverable. SWALLOW Swallow tails increase the turning arcs in boards that have a wider tail shape. Width in the tail adds to push and stability and is balanced by the mobility in the swallow shape. WING A wing is technically a rail feature. This shape is a turning in of the rail, usually around the fin, that releases water at the dip as opposed to the tail, creating a looser feel.

EVA Foam pad Thermo Shell top 1 Layer fiberglass EPS Foam core 1 Layer fiberglass Thermo Shell base

EVA Foam pad/Ghost grip Top graphic/Specialty fibers 2 Layer fiberglass EPS Foam core

Full length wood stringer

2 Layer fiberglass Base graphic/Specialty fibers

SOFT Unlike other soft construction surfers we use a wood stringer with our foam core to maintain rigidity and response. A reinforced top and bottom sheet and a foam rail protects from dings, dents, and pretty much anything else you can throw at it.

EVA deck pad on top of board Full IXPE foam top Fiberglass reinforcement

EPS Foam core

1 Full length wood stringer

Fiberglass reinforcement HDPE Base graphic

FINS

SELECTION CHART

SURF

TRACKING Boards with a lot of tracking are great at holding a straighter line. This can be adjusted to taste by changing the fin setup. CARVE The heel-to-toe carving up and down the wave. If you love making turns aim for a high carve ability rating. SPIN Skim style boards are designed to make spinning in front or on top of the wave smooth and simple. AIR Designed with aerial maneuvers in mind. The higher the rating, the easier it is to get those fins out. FINS

CRUISE

HYBRID

SKIM

SKILL LEVEL

BEGINNER

EXPERT

34 // WAKESURFERS

WAKESURFERS // 35

CONNELLY SKIS

2025 DEALER BOOK

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52-53 Page 54-55 Page 56-57 Page 58-59 Page 60-61 Page 62-63 Page 64-65 Page 66-67 Page 68-69 Page 70-71 Page 72-73 Page 74-75 Page 76-77 Page 78-79 Page 80-81 Page 82-83 Page 84-85 Page 86-87 Page 88-89 Page 90-91 Page 92-93 Page 94-95 Page 96

Made with FlippingBook flipbook maker