ROTATING ASSEMBLIES
RE-Ring Kits Stock economy engine re-ring kits include cast iron “X” or moly coated “K” Sealed Power piston rings, Clevite 77 “P-Series” engine bearings, and Sealed Power 260-Series complete gasket set. Sealed Power gasket sets feature Fel-Pro Perma- Torque head gaskets, non-stick intake manifold gaskets, blue stripe valve cover and oil pan gaskets, rubber rear main seal, and all necessary gaskets and seals. Order pistons rings and engine bearings in the available sizes below. No other brands are avaiable for replacement. Sealed Power “X” and “K” piston ring size available: STD, .020, .030, .040, .060. Clevite 77 "P-Series" engine bearing size available: STD, .001, .010, .020, .030.
Ring Material
Ring Package
Range of Ring Size
Range of Bearing Sizes STD., .040
Part No.
Description
AFM09454-1
1970-90 Big Block Chevy
Moly
5/64", 5/64", 3/16"
STD., .060
Engine Rebuild Kit Part No.
Description
1970-90 Big Block, Sealed Power Moly Rings, Clevite 77 Rod & Main Bearings, Oil Pump, Timing Set, Freeze Plugs, Fel Pro Gasket Set. Without Pistons.
AFM10454-1
CYLINDER HEADS
EDE60819
Chevrolet “W” Engine 348-409 Edelbrock Performer RPM
Designed for 1961-65 Chevy 348/409 big-block, cylinder heads feature OEM port locations and valve angles for bolt-on convenience, 220cc intake and exhaust ports, improved port design, screw-in rocker studs and hardened guide plates. Part No. Description Intake Runner Comb. Chamber
Port Type
Intake Valve
Exhaust Valve
EDE60819
Assembled, CNC Ported
215cc 215cc
16cc 16cc
Stock Stock
2.190" 2.190"
1.720" 1.720"
EDE60815 Assembled w/1.55" Dia. Hyd. Roller Valve Springs
Chevrolet Big Block 396-454 AFR CNC Magnum Aluminum Cylinder Heads
AFR CNC Magnum aluminum cylinder heads feature stainless intake and exhaust valves, 10° locks and retainers, and a competition 5-angle valve job. All heads are sold in pairs, completely assem- bled (unless specified as bare).
AFR2100-1
Intake Runner
Comb. Chamber
Port Type
Valve Angle
Intake Valve
Exhaust Valve
Part No.
Description
AFR2100-1 AFR2000 AFR2101 AFR2101-1 AFR2001
Magnum Heads, Assembled, Partially CNC-Ported, CNC Bowl Blends
305cc 121cc Rect 315cc 121cc Rect 325cc 117cc Rect 325cc 121cc Rect 335cc 121cc Rect 345cc 117cc Rect 357cc 121cc Rect 385cc 121cc Rect 345cc 121cc Rect. 385cc 121cc Rect. 265cc 109cc Oval 265cc 113cc Oval 290cc 113cc Oval
24°/15° 2.250" 1.880" 24°/15° 2.250" 1.880" 24°/15° 2.300" 1.880" 24°/15° 2.300" 1.880" 24°/15° 2.300" 1.880" 24°/15° 2.300" 1.880" 24°/15° 2.300" 1.880" 24°/15° 2.350" 1.880"
Magnum Heads, Assembled. Fully CNC-Ported
Magnum Heads, Assembled. Partially CNC-Ported, CNC Bowl Blends Magnum Heads, Assembled. CNC Chambers, CNC Bowl Blends
Magnum Heads Assembled. Fully CNC-Ported
AFR2110
Magnum Heads, Assembled, Partially CNC-Ported, CNC Bowl Blends
AFR2010-TI AFR2020-TI AFR2110-1 AFR3580
Magnum Heads, Assembled. Fully CNC-Ported Magnum Heads Assembled. Fully CNC-Ported
Magnum Heads, Assembled, Fully CNC-Ported, CNC Bowl Blends Magnum Heads, Bare, Fully CNC-Ported, CNC Bowl Blends Magnum Heads, Assembled, Partially Ported, CNC Bowl Blends Magnum Heads, Assembled, Partially Ported, CNC Bowl Blends Magnum Heads, Assembled, Fully CNC-Ported, CNC Bowl Blends
24°/15° 2.300'
1.880"
24°/15° 2.380" 1.880" 24°/15° 2.190" 1.880" 24°/15° 2.190" 1.880" 24°/15° 2.250" 1.880"
AFR3610
AFR3610-1
AFR3640
AFR3708
Magnum Heads, Assembled, Fully CNC-Ported, CNC Bowl Blends
457cc 90cc Rect. Int. 18°/4° Exh.11°/4° 2.400" 1.800"
205
2021-22 ENGINE BUILDER CATALOG
Made with FlippingBook flipbook maker