PRICE • SERVICE • SELECTION • DELIVERY
12V WHEELED BATTERY CHARGER 40/15/5A WITH POWER MODE + ENGINE START • Analog knob controls • Automatic charge mode
NITROZIP SURFACE PREPARATION KIT • Using the Dynabrade Nitro Series™ NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust
and seam sealers in preparation for repair or replacement of damaged vehicle components
• Multi-phase process • Stable power mode • Timed charge routines • Manual / Timed charge mode • Polarity protection • Engine start assistance
• When equipped with an eraser wheel the NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below
• Includes: NZ1 Standard Tool, 92252 1/2”Wheel Hub Assembly, 92248 1/2”Coarse Wire Wheel, 92239 3/4”Wheel Hub Assembly, 92245 3/4”Coarse Wire Wheel, 92255 RED-TRED® Zip Eraser Wheel
https://cloreautomotive.com/product/pl3740/
DNA-NZ1K DNA-92245 3/4” Coarse Wire Wheel DNA-92255 RED-TREAD® Eraser Wheel MORE BODY REPAIR TOOLS ON PAGES 65-67
MORE BATTERY EQUIPMENT ON PAGES 16-18, 32, 46, 54, 55 SOL-PL3740
17 GALLON LOW PROFILE OIL DRAIN WITH ELECTRIC PUMP
PREMIER R-134A REFRIGERANT RECOVERY, RECYCLING, AND RECHARGING MACHINE Specifications: • Operating Range: 32° - 120°F (0°-50°C) • Recovery Performance: >95% at 70 to 75° F (21 to 24°C) <30 minutes • Voltage: 125 VAC 60 Hz • Charge Performance: +/- 0.5 oz at 70° to 75° F (+/- 15g at 21° to 24° C) • Display: 5 cm x 9 cm graphical display • Filter-Drier Capacity: 150 lb (68kg), spin-on type • Hoses: 9 ft (2.75 m) • Weight: Approximately 230 lbs. (103 kg)
• Made-in-USA 110V UL listed electric motor for easy waste oil discharge • 17 Gallon capacity drain with 6.5’ long discharge hose with metal “J” spout • Oversize fluid collection area with removable metal screen • Long t-handle allows easy mobility • Overall Dimensions: 43.30 in. x 27.55 in. x 7.48 in.
• Compressor: 3/8 hp, pressure protected, oiled, hermetically sealed • Dimensions (HxWxD): 48.5 in x 24 x 36 (123 cm x 61 cm x 91 cm) • Vacuum Pump: 1.5 cfm Dual Stage, 29.9 InHg • Internal cylinder: 30 lb DOT (13.6 kg); 22 lb (10 kg) capacity • Certifications: SAE J2788
Promotion is valid July 1 through Sept. 30, 2025 while supplies last, visit www.atdtools.com/literature for rebate form
ATD-5197K
MORE LUBRICATION EQUIPMENT ON PAGES 45-48
ROB-34788NI
3 TON OFF ROAD SERVICE JACK WITH A FREE MECHANIC’S PAD & SAFETY GLASSES
• Capacity: 3 Tons • Height: 5.9” (Low), 28.74”(High)
• Heavy-duty aluminium/steel hybrid frame • Adjustable saddle that extends to 4.96”, 6.22”, 7.48” or remove extension completely • Large front/rear wheels for easy maneuverability off road • Meets or exceeds 2019 ASME PASE Standards FREE MECHANIC’S PAD & SAFETY GLASSES 3918 50000
Due to pricing uncertainty caused by tariffs, this publication will not be priced. Please check current pricing with your local dealer. July 1 through August 14, 2025 Tool Specials D1
AFF-300OR
MORE LIFTING TOOLS ON PAGES 60-64
2 D
2.5 GALLON FLUID EVACUATION/DISPENSER • Utilizes compressed “shop-air” for dispensing and extracting • Isolated flow control and pressure/vacuum switch valves provide simple functionality control • Redundant pressure control systems safely maintain peak output pressure below 30 psi (2 bar) • 2.5 gal (10 l) capacity reservoir • Convenient flow control and auto-shutoff valve • Includes combination pressure/vacuum gauge • Lid is interchangeable with other reservoir sizes available for separate purchase
10-PC. METRIC RATCHETING FLEXIBLE HEAD EXTRA LONG WRENCH SET • Each wrench features both a ratcheting flexible head box-end and a non-ratcheting zero-degree offset box-end for maximum versatility • Non-ratcheting 12-point zero-degree offset box-end is ideal for loosening stubborn fasteners • Ratcheting 180-degree flexible head spline drive box-end quickly removes fasteners in hard-to- reach areas • Universal spline drive works on six fastener types: spline, 6-point, 12-point, star, square, and rounded • 72-tooth ratchet mechanism provides smooth and effortless operation • Extra-long design offers enhanced leverage and extended reach • Large engraved size markings ensure lasting legibility for quick identification
3/4” PNEUMATIC IMPACT WRENCH • Min/Max working torque fwd: 150/700 ft.lbf • Max torque reverse: 1000 ft.lbf • Air inlet thread size: 3/8”
FREE PROTECTIVE COVER FOR CP772H
• Max dynamic air working pressure: 90 psi • Min hose diam (16 ft hose length): 0.5 in • Min hose diam (5 m hose length): 13 mm • Free Speed: 4200 rpm • Length: 9.65” • Power weight ratio: 280 Nm/kg • Weight: 10.4 lb • Blow per minute: 900 CPT-772H MORE AIR TOOLS ON PAGES 9-14 18 GALLON PRESSURIZED FLUID DRAIN AND EVACUATION TANK • Funnel height: 45” to 72” • Pressure: up to 150 psi • Large telescoping 14” 2.75 gallon bowl • Includes combo evacuation hose/sight gauge • (2) 3” ball bearing swivel casters and (2) fixed wheels
FREE PREMIUM VACUUM BLEED ACCESSORY KIT
Promotion is valid July 1 through Sept. 30, 2025 while supplies last, visit www.atdtools.com/literature for rebate form
MIT-MVA6921
CPT-CA124745
MIT-MV7110 MORE FLUID EVAC/EXCHANGE EQUIPMENT ON PAGES 15, 36, 39, 46, 50
ATD-6510 MORE HAND TOOLS ON PAGES 4, 19-29
VEHICLE FIRE BLANKET Features:
• Flexible, large 6 x 9M blanket covers most vehicles • Limits damage and spread of fire to nearby areas • Designed for gas, hybrid and EV vehicles • Use on any passenger vehicle including internal ombustion vehicles and electric vehicles • Easily transport & store with compact, waterproof bag • Contains toxic smoke derived from combustion • Quickly deploy from convenient, highly visible storage rack • Contains thick smoke for better visibility • Comfortably deploy blanket over vehicle with oversized straps • Deploy in under a minute with only two people • Single use JDO-VFB1 MORE ELECTRIC VEHICLE TOOLS ON PAGE 27
FREE 50’ X 3/8” RUBBER AIR HOSE
FREE ADF WELDING HELMET EASY WELD ® 140 FC-i FLUX-CORE WELDER • Input: 120V • Output Range: 30–140A • Easy to use, no gas required • Welding capacity up to 1/4” steel • Complete with 8 ft. MIG torch, 6 ft. power cable, 8 ft. ground cable & clamp • Infinite voltage and wire feed speed control FOW-55732
FREE WALL RACK
LIN-72N3850
JDO-WRFB
FOW-261 MORE WELDING EQUIPMENT ON PAGES 37, 58, 59
LIN-3601 MORE LUBRICATION EQUIPMENT ON PAGES 45-48
TECH600PRO TPMS BUNDLE KIT INCLUDES 30 SENSORS • 2.8” High resolution color display • Ruggged, ergonomic enclosure • Wireless tool updates and data transfer • More TPMS service per battery charge • 2-year warranty and 2 years of software
EXTRA-LONG FOLDING ALUMINUM PLATFORM • Perfect for getting that extra reach when working on or washing trucks, vans, SUVs and RVs • Anti-slip strips ensure secure footing on work platform • Extra-long work platform measures 38” x 12” • 19.685” tall • Non-slip rubber feet on work platform for added stability • Maximum Weight Capacity: 330 lbs. • Lightweight, space saving design folds away for easy storage • Construction: 6063 aluminum alloy • Steel hinges with safety locks for solid and stable work platform • Certification: EN131 for 330 lbs.
HEAVY DUTY DIAGNOSTIC SOLUTION WITH HDS 1000 TABLET Includes: • HDS 1000 Rugged Touchscreen Windows 10 Tablet • Wireless Bluetooth RP1210A Compliant VCI • 6-Pin & 9-Pin Deutsch Connector Cable • 16-Pin / OBDII (Volvo) Cable • Diagnostic Software for 12-months • Soft carry case
FREE ADS 525X DIAGNOSTIC SCAN TOOL
• Long lasting LiPo battery • Graphical user interface • 2.4 GHz Wi-Fi connectivity • Qi (Inductive) charging • Bluetooth connectivity
FREE WALL MOUNTED INDUCTIVE CHARGER
OTC-3945
Promotion is valid July 1 through Sept. 30, 2025 while supplies last, visit www.atdtools.com/literature for rebate form
Visit boschrebates.com for redemption
MTI-WRTPROWMC05
ATD-9534 MORE SHOP EQUIPMENT ON PAGES 33-40, 64
MTI-WRT600Pro-RS30P MORE SENSORS ON PAGE 33
OTC-3824A
MORE DIAGNOSTIC EQUIPMENT ON PAGES 18, 41, 54-57
3 D
VARIABLE SIX-SPEED 1A ROTARY TOOL KIT • Powerful 1 Amp Motor • Six variable settings range from 10,000 RPM - 32,000 RPM • Multiple applications: polishing, carving, sanding, or cutting • Quick-change keyless chuck for easy accessory changes • Hard-shell, plastic carry case for simplified storage and organization • Included drive shaft is ideal for intricate and complex detail work • Includes ninety-nine additional accessories
CENTRAL VAC ORBITAL PALM SANDER • Free Speed (RPM): 11, 000 • Pad / Bonnet Size: 6”
12 VOLT JUMP STARTER • 450 Start Assist Amps • 14.8V, 10A DC Output • 74Wh Capacity • Starts Most V8 Vehicles
• Exhaust: Rear • Pad Thread: 6” • Length: 8.9” • Air Cons: 1.6 CFM • Rec. Hose Size: 3/8” • Air Inlet NPT/BSP: 1/4” • Vibration m/sec2: 1.8 • Noise Level (dBA): 75
• 2 USB Outputs (2.4A, 1.0A) • LED Charge Status Display • 24” #6 AWG Cables • Able to start totally dead (0.0V) batteries • Fast recharging with QC3.0 charger • Reverse Polarity and Backfeed Protection • Over-Voltage and Short Circuit Protection • Over-Current Protection
MORE POWER TOOLS & ACCESSORIES ON PAGES 7, 8 FOW-55345
MORE AIR TOOLS ON PAGES 9-14 ARC-6700-6-336
NON-AEROSOL SPRAYER-YELLOW • 80-150 PSI operating pressure • Refillable • Eco friendly • Eliminates dangerous or harmful propellants • Not for use with paint products • Do not use with flammable propellants • Not recommended for use with paint products MORE BATTERY EQUIPMENT ON PAGES 16-18 SOL-JNC325
CORDLESS HOT STAPLE & PLASTIC WELDING REPAIR KIT Specifications: • Lithium battery capacity: 2000mAh • Output: 5.V-1.0A 5.0W • Charging time: 3-4 hours • Plastic filler rod size: 8” • Maximum temperature: 1022°f (550°C) • Staple diameter size: Φ0.8mm &Φ0.6mm • Input: 120V, 60HZ
TORQUE LIMIT RATCHET WRENCH SET - 25, 35 & 40 Nm Includes:
• Torque Limiting Ratchet Wrench 40Nm (YELLOW) • Torque Limiting Ratchet Wrench 35Nm (BLUE) • Torque Limiting Ratchet Wrench 25Nm (RED)
MORE PAINTING EQUIPMENT ON PAGES 68, 69 TIT-19428
CCT-8945 MORE LUBRICATION EQUIPMENT ON PAGES 45-48
MORE BODY REPAIR TOOLS ON PAGES 65-67 AST-7601
6-PC. SAE & METRIC SOCKET TRAY SET • Each post is clearly marked for socket size • Organize your sockets for quick,
AIR OPERATED HIGH-PRESSURE GREASE PUMP FOR 120 LBS. DRUM • 50:1 air-operated grease pump kit provides efficient greasing and convenient portability • 1-3/16 in. dia. x 28-3/4 in. tube designed for use with 120-lbs. (16 gallon) drums • Drum cover prevents impurities from contaminating grease and keeps the pump in a vertical positioN • Follower plate is pulled toward bottom of drum by pump vacuum for effective pumping of heavy grease • Compatible with light and self-collapsing grease up to NLGI No. 2 MORE LUBRICATION EQUIPMENT ON PAGES 45-48 ATD-15217
PACKOUT ROLLING DRAWER TOOL BOX The PACKOUT™ Rolling Drawer Tool Box offers a quick, one-handed opening, allowing maximum job site productivity. With a 250-pound weight capacity, the Rolling Drawer can store a variety of heavy tools and materials. It also includes the most versatile dividers that allow for additional segmentation to keep you more organized. The PACKOUT™ Modular Storage System will enable
easy identification by size and style • Post bases beefed-up to hold sockets more securely • Each tray holds shallow and deep sockets all in one holder • 100% Made in the USA • Set holds 172 Sockets Total MORE HAND TOOLS ON PAGES 4, 19-29 MTI-92000 INDEX Abrasives & Blasters.............................66 Air Accessories..........................12-14, 67 Air Compressors...................................13 Air Cut Off Tools................................ 9, 10 Air Drills......................................... 10, 11 Air Filtration.................................. 13, 14 Air Hammers.....................................9-11 Air Impacts.......................................9-11 Air Grinders.................................9-11, 65 Air Needle Scaler.............................. 9, 11 Air Polishers/Buffers...................... 10, 65 Air Ratchets......................................9-11 Air Sanders...............................10, 11, 65 Air Saws...............................................10 Air Shears..............................................9 Air Tanks.............................................. 13 Air Tools............................................9-14 Assortment Kits........................34, 47, 66 ATF Exchange.........................................6 Ball Joint Service.................................53 Battery Charge & Test.............................. ................................16-18, 32, 46, 54, 55 Battery Maintainers....................... 16, 17 Bit Sets.......................................... 19, 44 Blow Guns..................................... 13, 15 Blowers................................................ 40 Body Repair....................................65-67 Bolt Extractor Sets...............................44
you to easily customize and build your storage system to transport and organize your tools and accessories.
MORE MILWAUKEE PRODUCTS ON PAGES 4, 5 MPT-48-22-8420
Test Leads & Probes.............................54 Thread Restorer Sets............................44 Tie Downs & Tow Straps....................... 35 Tie Rod Tools........................................ 53 Timing Lights.......................................41 Tire Changers.......................................33 Tire Tools...................................33, 49, 51 Tool Storage................................5, 70, 71 Torque Extension Sets..........................49 Torx & Hex Bit Sockets.........................19 Torx & Hex Key Sets.............................23 TPMS Tools........................................... 33 Truck Ramps........................................64 Under Hood....................................41-44 Utility Carts..........................................70 Vacuums.......................................... 5, 40 Vehicle Lifts.........................................60 Welding Equipment..................37, 58, 59 Welding Helmets.................................59 Wheel Balancers..................................33 Wheel Service Tools....................... 49, 51 Windshield Tools.................................. 67 Wireless Speakers/Radios................ 5, 30 Work Table/Stand.......................... 69, 70 Wrench Racks......................................26 Wrenches...........15, 17, 22, 24, 26, 43, 47 Wrenches-Adjustable. ......................... 26 Wrenches-Combination................. 22, 26 Wrenches-Crowfoot............................. 22 Wrenches - Impact..............................4-6 Wrenches-Ratcheting...............22, 26, 27 Wrenches-Torque................................. 24
Booster Cables.....................................17 Brake & Wheel................................49-53 Brake Bleeding....................................50 Brake Caliper Tools............................... 52 Brooms/Brushes.............................. 8, 40 Cam Shaft Tools................................... 43 Carbide Burrs.........................................8 Circuit Testers................................. 54, 57 Clamps......................................27, 37, 54 Compression Testers............................. 56 Conditioning Discs.................................8 Cooling System Tools................15, 36, 56 Cooling System Test & Refill Kits.......... 15 Cordless Tools......................................4-6 Creepers & Seats..................................38 Cut Off Tools........................................7-9 Dent Pullers.........................................67 Desiccant Dryers..................................14 Diagnostics.........................18, 41, 54-57 Die Grinders.........................................65 Digital Calipers....................................41 Digital Multimeters.............................54 Disconnect Tools/Sets.......................... 42 Drill Bit Sets...........................................7 Drills...................................................... 5 Drum Dollies........................................47 Electric Angle Grinder............................7 Electric Saws..........................................7 Electric Vehicle Tools...................... 27, 54 Electrical Test Kits................................ 54 Electrical Tools................................. 7, 65 Engine Stand & Cranes.........................64
Engine Tools..................13, 41, 43, 56, 57 Exhaust Tubing.................................... 40 Extension Cords...................................32 Fender Cover........................................39 Flaring/Tubing Tools...................... 24, 51 Fluid Evac/Exchange.....15, 36, 39, 46, 50 Fuel System Tools......................43, 56, 57 Fuel Transfer Equipment...................... 36 Funnels.......................................... 45, 48 Grease Guns..................................5, 6, 46 Grease/Oil Pumps................................48 Grease Accessories...............................46 Grinders............................................. 6, 7 Grinding Discs........................................8 Hammers....................................... 28, 67 Hand Riveters......................................66 Hand Tools..................................4, 19-29 Harmonic Balancers.............................42 Heat Guns............................................67 Hose-Air/Water.........................12, 37, 39 Hybrid Tools......................................... 24 Impact Accessories...............................21 Impact Hex Drivers...............................29 Infrared Thermometers........................ 56 Inspection Camera...............................55 Jacks and Jack Stands.........33, 35, 61-63 Jump Starts................................... 16, 17 Knives.........................................4, 39, 67 Leak Detection.....................................15 Lifting Equipment...............35, 60-64, 69 Lights & Lighting Equipment......4, 30-32 Lock Out Tools...................................... 35
Lubrication. ....................................45-48 Magnetic Trays..................................... 39 Masking Machines...............................69 Multimeters......................................... 54 Non-Aerosol Sprayer............................68 Nut Drivers..................................... 23, 44 Oil Drains.............................................45 Oil Filter Tools...................................... 47 Oribital Sanders.....................................4 Paint Booths........................................69 Paint Equipment............................ 68, 69 Paint Shakers.......................................68 Parts Washers...................................... 33 Picks & Hooks......................................23 Pinstripe Remover...............................67 Pipe Wrenches..................................... 26 Plasma Cutters.....................................58 Pliers...................4, 15, 24-27, 42, 47, 67 Polishers.............................................. 65 Power Inverters...................................17 Power Pull...........................................35 Power Tool Accessories....................... 7, 8 Pressure Testers............................. 56, 57 Pry Bars......................................... 23, 27 Pullers................................35, 42, 51, 53 Pumps-Oil, Gas, Grease.................. 36, 48 Punch & Chisels............................... 7, 28 Ratchets............................4, 6, 19, 22, 27 Rechargeable Batteries........................30 Reciprocating Saw........................... 7, 10 Reels-Air, Water, Lube.......................... 12 Refractometers.............................. 15, 36
Riveters......................................... 65, 66 Safety.................................................... 7 Scrapers......................................... 23, 39 Screw Extractors..................................44 Screwdrivers.................................. 23, 27 Sensors................................................ 33 Serpentine Belt Tools........................... 43 Service Carts........................................70 Shop Equipment.......................33-40, 64 Shop Press Accessories.........................61 Shop Presses........................................61 Shop Stools..........................................40 Shop Vises............................................ 37 Smoke Machines..................................55 Socket Sets....4, 19-22, 27, 29, 43, 44, 49 Socket Trays/Rails/Holders................... 20 Soldering Tools.................................... 67 Spark Plug Tools................................... 41 Specialty Tools.........38, 39, 41-43, 47, 57 Spray Gun Accessories.................... 68, 69 Spray Guns...........................................68 Steering Tools...................................... 51 Star/Hex Key Sets.................................23 Step Platforms.....................................33 Strut & Spring Compressors.................50 Stud Removers.....................................44 Stud Welders....................................... 37 Surface Prep..........................................8 Tachometer.......................................... 41 Tap & Die.............................................70 Tape Measures.....................................39 Telescoping Mirrors..............................39
4 D
PUMP
INFLATOR & COMPRESSOR
LIGHTING
M18 ™ TRANSFER PUMP (TOOL ONLY) This portable water transfer pump is the industry’s first cordless transfer pump, offering you the fastest setup.
M12 ™ COMPACT INFLATOR FASTEST CORDLESS TIRE INFLATOR. The Milwaukee® M12™ Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere.
REDLITHIUM ™ USB LOW-PROFILE HEADLAMP This headlamp delivering 600-lumens of TRUEVIEW™ High Definition Output with a thin 1 in. light head, and 125° of flood beam coverage. Our rechargeable headlamp is designed with the battery pack in the
TM
TM
MPT-2771-20
MPT-2475-20
rear for maximum maneuverability in tight spaces and a balanced design for all-day use. Includes: • REDLITHIUM™ USB Low-Profile Headlamp (2115-21) • REDLITHIUM™ USB Rechargeable Pack
COOLER
POWER INVERTER
PACKOUT ™ COOLER The PACKOUT™ Cooler has an impact-resistant molded base that can connect with other PACKOUT™ system components via integrated locking cleats. The leak-proof food grade liner and dual layer insulation ensure that the cooler holds ice for up to 24 hours.
M18 ™ TOP-OFF ™ 175W POWER SUPPLY M18™ TOP-OFF™ 175W Power Supply delivers faster simultaneous power to personal devices and small electronics.
TM
• 2FT Heavy Duty USB Cord • (4) Universal Hard Hat Clips
MPT-48-22-8302
MPT-2846-20
MPT-2115-21
OUTDOOR
M18 ™ ROCKET ™ DUAL POWER TOWER LIGHT M18™ ROCKET™ Dual Power Tower Light provides 25% More Light and All Day Operation on the job site with 2500 lumens of TRUEVIEW™ High Definition Output. The LED light tower has Dual Power capability and can be powered by our M18™ batteries or by an extension cord. The tower light head can extend from 4 to 7 feet to light overhead work or minimize shadows when casting light downward. The LED light tower is capable of filling large areas with light and provides 2,500 lumens of TRUEVIEW™ High Definition Output in high mode, 1,100 in medium, and 700 in low.
2727-20
M18 FUEL™ 16” Chainsaw (Tool Only)(2727-20), 16” Oregon Bar, Scrench M18 FUEL™ Power Head w/ QUIK-LOK™ (3016-20), M18 FUEL™ QUIK-LOK™ String Trimmer Attachment (49-16-2717), M18™ REDLITHIUM™ FORGE™ XC8.0 Battery Pack (48-11-1881), M18™ & M12™ Rapid Charger(48-59-1808) M18 FUEL™ Power Head w/ QUIK-LOK™ (3016-20), M18 FUEL™ QUIK-LOK™ String Trimmer Attachment (49-16-2717), M18 FUEL™ Blower (3017-20), M18™ REDLITHIUM™ FORGE™ XC8.0 Starter Kit (48-59- 1881), M18™ & M12™ Rapid Charger (48-59-1808) M18 FUEL™ Blower (3017-20), M18™ REDLITHIUM™ FORGE™ HD12.0 Battery Pack (48-11-1813), M18™ & M12™ Rapid Charger(48-59-1808)
MPT-2727-20
M18 FUEL™ 16” Chainsaw (Tool Only)
M18 FUEL™ String Trimmer w/ QUIK- LOK™ Kit
MPT-3016-21ST
3016-21ST
M18 FUEL™ String Trimmer/Blower Combo Kit
MPT-3031-21
3031-21
TM
MPT-3017-21HD
M18 FUEL™ Blower Kit
MPT-2131-20
HAND TOOLS FASTBACK™ 6IN1 Folding Utility Knife
MPT-48-22-1505
FASTBACK™ 6IN1 Folding Utility Knife (48-22-1505)
48-22-1505
FASTBACK™ Spring Assisted Folding Knife
MPT-48-22-1530
FASTBACK™ Spring Assisted Folding Knife (48-22-1530)
48-22-3422 (5” Curved Jaw); 48-22-3421 (7” Curved Jaw); 7”Torque Lock™ Maxbite™ Curved Locking Pliers (48-22-3607); 10”Torque Lock™ Max- bite™ Curved Locking Pliers (48-22-3610); 7”Torque Lock™ Straight Jaw Locking Pliers (48-22-3507); 10”Torque Lock™ Straight Jaw Locking Pliers (48-22-3510); 6”Torque Lock™ Long Nose Locking Pliers (48-22-3506); 48-22-3509 (9”Long Nose); 11”Torque Lock™ Locking C-Clamp With Regular Jaws (48-22-3531); 6 “ Torque Lock™ Locking C-Clamp With Regular Jaws (48-22-3532) (10) Standard Length SAE:1/4”, 7/32”, 5/16”, 7/16”, 3/8”, 9/16” 5/32”, 9/32”, 11/32”, 1/2”; (2) Extensions: 3” & 6”; (1) 90-Tooth Ratchet; (1) Universal Joint; (12) Deep Well Metric: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm; (12) Standard Length Metric: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm; (11) Deep Well SAE:1/4”, 3/16”, 5/16”, 7/16”, 3/8”, 9/16”,7/32” 9/32”, 5/32”, 11/32”, 1/2” (12) Standard Length SAE:1/2”, 1/4”, 1”, 11/16”, 13/16”, 15/16”, 3/4”, 3/8”, 5/16”, 7/16”7/8”, 9/16”; (2) Extensions: 3” & 6”; (1) 90-Tooth Ratchet; (1) Universal Hose Adapter; (10) Deep Well SAE: 1/2”, 1/4”, 11/16”, 13/16”, 3/4”, 3/8”, 5/16”, 7/16”, 7/8”, 9/16”; (14) Deep Well Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm; (14) Standard Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm PACKOUT™ Low-Profile Organizer (48-22-8436), 1/4” Drive 50pc Ratchet & Socket Set - SAE & Metric (48-22-9004), 3/8” Drive 56pc Ratchet & Socket Set - SAE & Metric (48-22-9008) (4) 6” 18 TPI Metal THE TORCH™ SAWZALL® Blades; (2) 6” 5 TPI Wood THE AX™ SAWZALL® Blades; (2) 6” 7/11 TPI Multi-Material THE WRECKER™ SAWZALL® Blades; (2) 9” 14 TPI Metal THE TORCH™ SAWZALL® Blades; (2) 9” 5 TPI Wood THE AX™ SAWZALL® Blades 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/8”, 2-1/4”, 2-1/2”, 3” Bi-Metal Hole Saw; 2-5/8”, 3-1/4”, 3-3/8”, 3-5/8”, 3-3/4”, 4-1/8”, 4-1/4”, 4-1/2”, 4-3/4” Hole Dozer™ Bi-Metal Hole Saw; 3/8”, 7/16” Hex Shank Arbor; 7/16” No Wobble Arbor; (3) 3-1/2” Pilot Bit; 1/8” Hex Key
MPT-48-22-3690
10-Pc. Torque Lock™ Locking Pliers Kit
1/4” Drive 50pc Ratchet & Socket Set - SAE & Metric
MPT-48-22-9004
48-22-3690
3/8” Drive 56pc Ratchet & Socket Set - SAE & Metric
MPT-48-22-9008
106-Pc. 1/4” & 3/8” Metric & SAE Ratchet & Socket Set W/ PACKOUT™ Organizer
48-22-9486
MPT-48-22-9486
MPT-49-22-1129
SAWZALL® Demolition Blade Set - 12-Pc.
HOLE DOZER™ General-Purpose Hole Saw Kit - 28-Pc.
MPT-49-22-4185
49-22-1129
TM
MPT-2584-20
M12™ FUEL™ 6” Random Orbital Sander
M12™ FUEL™ 6” Random Orbital Sander (3/32”) (2584-20)
M12 FUEL™ 6” Random Orbital Sander (3/32”), Pressure Sensative Adhesive Sander Backing Pad - Soft, Hook & Loop Sander Backing Pad - Soft, M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery, M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery, M12™ Charger
MPT-2584-22CX
M12 FUEL™ 6” Random Orbital Sander Kit
MPT-2585-20
M12 FUEL™ 6” Random Orbital Sander
M12 FUEL™ 6” Random Orbital Sander (3/16”) (2585-20)
M12 FUEL™ 6” Random Orbital Sander (3/32”), Pressure Sensative Adhesive Sander Backing Pad - Firm, Hook & Loop Sander Backing Pad - Firm, M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery, M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery, M12™ Charger
MPT-2585-22CX
M12 FUEL™ 6” Random Orbital Sander Kit
2562-22
MPT-3485-20
M12 FUEL™ 1/4” Right Angle Die Grinder M12 FUEL™ 1/4” Right Angle Die Grinder Kit M12 FUEL™ Stubby 3/8” Impact Wrench Kit
M12 FUEL™ 1/4” Right Angle Die Grinder (3485-20)
M12 FUEL™ 1/4” Right Angle Die Grinder (3485-20); M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery Pack (48-11-2425); M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack (48-11-2450); M12™ Lithium-ion Battery Charger (48-59-2401); Wrench; Carrying Case M12 FUEL™ Stubby 3/8” Impact Wrench (2562-20), M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack (48-11-2450), M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery Pack (48-11-2425), M12™ Lithium-ion Battery Charger (48-59-2401), Contractor Bag M12 FUEL™ 1/4” High Speed Ratchet (2566-20), (2) M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), M12™ Lithium-ion Battery Charger (48-59- 2401), Soft Carrying Case M12 FUEL™ Stubby 1/2” Impact Wrench (2563-20), M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack (48-11-2450), M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery Pack (48-11-2425), M12™ Lithium-ion Battery Charger (48-59-2401), Contractor Bag
MPT-3485-22
MPT-2562-22
2584-20
MPT-2566-22
M12 FUEL™ 1/4” High Speed Ratchet Kit
M12 FUEL™ Stubby 1/2” Impact Wrench Kit M12 FUEL™ 3/8” High Speed Ratchet Kit
MPT-2563-22
MPT-2567-22
M12 FUEL™ 3/8” High Speed Ratchet (2567-20), (2) M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), Soft Carrying Case
M12 FUEL™ 3” Compact Cut Off Tool (2522-20), 3” Carbide Abrasive Blade (49-94-3005), 3” Diamond Tile Blade (49-94-3010), Blade Wrench, Metal Cut Off Wheel, 7/16” Flange Adapter, Shoe Guard
MPT-2522-20
M12 FUEL™ 3” Compact Cut Off Tool
2567-22
5 D
SAFETY
SAFETY GLASSES - ANTI-SCRATCH LENSES This protective eyewear has an anti-scratch hard coat to protect .the lenses from the demands of the jobsite, designed for all day comfort
PACKOUT ™ DOLLY MILWAUKEE® PACKOUT™ Dolly is onstructed with impact-resistant polymers and smooth roll wheels, providing you up to 250 lbs of weight capacity in job site
PACKOUT ™ 2-DRAWER TOOL BOX PACKOUT™ 2-Drawer Tool Box has a 50lbs weight capacity and a locking security bar that allows you to padlock the drawers closed keeping them securely shut during transport. As part of the PACKOUT™
MPT-48-73-2010
conditions. The QUICKSTOP™ Loading Lever helps keep the dolly in place when loading and unloading, providing you with increased productivity on the job site.
Modular Storage, the toolbox allows you to customize your storage system for easy transportation and organization of tools and accessories.
SAFETY GLASSES - TINTED ANTI-SCRATCH LENSES The MILWAUKEE® Anti-Scratch Safety Glasses are available with yellow, gray, clear, tinted, and magnifying lenses.
MPT-48-22-8410
MPT-48-22-8442
PACKOUT ™ 3-DRAWER TOOL BOX PACKOUT™ 3-Drawer Tool Box has a 50lbs weight capacity and a locking security bar that allows you to padlock the drawers closed keeping them securely shut during transport. As part of the PACKOUT™ Modular Storage, the toolbox allows you to
PACKOUT ™ 40QT XL COOLER PACKOUT™ 40QT XL Cooler is constructed with an impact resistant body for ultimate jobsite durability. This jobsite cooler is P65 rated to withstand harsh environments and jobsite debris. PACKOUT™ 40QT XL Cooler features an integrated bottle opener,
MPT-48-73-2015
VACUUMS
M18 FUEL ™ PACKOUT ™ 2.5 GALLON WET/DRY VACUUM
customize your storage system for easy transportation and organization of tools and accessories.
drain plug, interior storage tray, and food-grade cutting board/divider for maximum versatility on and off the jobsite.
TM
Includes: M18 FUEL™ PACKOUT™ 2.5 Gallon Wet/Dry Vacuum (0970-20); Vacuum Power Tool Adapter (49-90-2018); HEPA Filter (49-90-1900); 6’ Flexible Hose; Crevice Tool; Utility Nozzle
MPT-0970-20
MPT-48-22-8443
MPT-48-22-8462
M12 FUEL ™ 1.6 GALLON WET/DRY VACUUM Includes: M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum (0960-20); HEPA Filter (49-90-1900); Crevice Tool; Utility Nozzle; 5’ Flexible Hose; Wall Mount
M18 ™ PACKOUT ™ SIX BAY RAPID CHARGER With its fast charging and PACKOUT™ compatibility, the M18™ PACKOUT™ Six Bay Rapid Charger
TM
MPT-0960-20
delivers users reduced downtime and unmatched portability when charging.
HEPA FILTER Works on the M18™ 2 Gallon Wet/Dry Vacuum (0880-20), M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum (0960-20), and the M18 FUEL™ PACKOUT Wet/Dry Vacuum (0970-20). This high-efficiency HEPA filter is excellent for fine dust suction.
PACKOUT ™ CUSTOMIZABLE WORK TOP PACKOUT™ Customizable Work Top features a fastener-ready design allowing you to attach vises, chargers, and a variety of other items to the top of their PACKOUT™ stack.
MPT-48-22-8488
MPT-48-59-1809
MPT-49-90-1900
3697-22
2903-22
2646-21CT
2738-20
48-11-1862
2960-22R
2967-20
2869-20
TM
M18™ Cordless 2-Speed Grease Gun (Tool Only)
MPT-2646-20
M18™ Cordless 2-Speed Grease Gun (Tool Only) (2646-20), Hose Sleeve
M18™ Cordless 2-Speed Grease Gun (Tool Only) (2646-20), M18™ & M12™ Multi-Voltage Charger (48-59-1812), M18™ Compact REDLITHIUM™ Battery (48-11-1815), 48” Flex Hose w/ Spring Guard, High Pressure Grease Coupler, Carrying Case, Shoulder Strap
MPT-2646-21CT
M18™ Cordless 2-Speed Grease Gun Kit
2880-22
M18 FUEL™ 7” Variable Speed Polisher (Tool Only)
MPT-2738-20
M18 FUEL™ 7” Variable Speed Polisher (Tool Only) (2738-20), Backing Pad, Screen Cover, Side Handle
M18 FUEL™ 1/2” Drill/Driver Kit (2903-22), (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850), M18™ & M12™ Multi- Voltage Charger (48-59-1812), Side Handle, Blow Molded Case
MPT-2903-22
M18 FUEL™ 1/2” Drill/Driver Kit
M18 FUEL™ 3/8 “ Mid-Torque Impact Wrench w/ Friction Ring M18 FUEL™ SAWZALL® Recip Saw - 1 Battery XC5.0 Kit M18 FUEL™ 4-1/2” / 5” Braking Grinder Paddle Switch, No-Lock Kit M18 FUEL™ 3/8 “ Mid-Torque Impact Wrench w/ Friction Ring Kit M18 FUEL™ 1” D-Handle Ext. Anvil High Torque Impact Wrench w/ ONE-KEY™
MPT-2960-20
M18 FUEL™ 3/8 “ Mid-Torque Impact Wrench w/ Friction Ring (2960-20)
M18 FUEL™ SAWZALL® Recip Saw (2821-20), M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850), M18™ & M12™ Multi-Voltage Charger (48-59-1812) M18 FUEL™ 4-1/2”/ 5”Braking Grinder Paddle Switch, No-Lock (2880-20), (2) M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (48-11-1865), M18™ & M12™ Rapid Charger (48-59-1808), T27 Guard, T1 Clip-On Guard, Side Handle, Wrench, Back Flange, Flange Nut, Contractor Bag M18 FUEL™ 3/8 “ Mid-Torque Impact Wrench w/ Friction Ring (2960-20), (2) M18™ REDLITHIUM™ XC5.0 Resistant Battery (48-11-1850R), M18™ & M12™ Multi-Voltage Charger (48-59-1812), Blow Molded Case
MPT-2821-21
3010-22
MPT-2880-22
MPT-2960-22R
MPT-2869-20
M18 FUEL™ 1” D-Handle Ext. Anvil High Torque Impact Wrench w/ ONE-KEY™ (2869-20), Tool-Free Adjustable Handle, Lanyard Loop
2967-22GG
M18 FUEL™ 1/2” Hammer Drill/Driver (2904-20), M18 FUEL™ 1/4” Hex Impact Driver (2953-20), (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack(48-11-1850), M18™ & M12™ Multi-Voltage Charger (48-59-1812), Side Handle, (2) Belt Clip, Blow Molded Case
MPT-3697-22
M18 FUEL™ 2-Tool Combo Kit
M18 FUEL™ 1/2” High Torque Impact Wrench w/ Friction Ring M18 FUEL™ 1/2” HTIW & 3/8” MTIW Automotive Combo Kit M18 FUEL™ 1/2” HTIW w/ Friction Ring & Grease Gun Combo Kit M18 FUEL™ 1” D-Handle Ext. Anvil High Torque Impact Wrench w/ ONE-KEY™ M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (2 Pk)
MPT-2967-20
M18 FUEL™ 1/2” High Torque Impact Wrench w/ Friction Ring (2967-20)
M18 FUEL™ 1/2” High Torque Impact Wrench w/ Friction Ring (2967-20), M18 FUEL™ 3/8 “ Mid-Torque Impact Wrench w/ Friction Ring (2960- 20), (2) M18™ REDLITHIUM™ XC5.0 Resistant Battery (48-11-1850R), M18™ & M12™ Multi-Voltage Charger (48-59-1812), Contractor Bag M18 FUEL™ 1/2”High Torque Impact Wrench w/ Friction Ring (2967-20), M18™ Cordless 2-Speed Grease Gun (Tool Only) (2646-20), M18™ REDLITHI- UM™ XC5.0 Resistant Battery (48-11-1850R), M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820), M18™ & M12™ Multi-Voltage Charger (48-59-1812), Contractor Bag M18 FUEL™ 1” D-Handle Ext. Anvil High Torque Impact Wrench w/ ONE-KEY™ (2869-20), (2) M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack (48-11-1812), M18™ & M12™ Rapid Charger (48-59-1808), Tool-Free Adjustable Handle, Lanyard Loop, Carrying Case
MPT-3010-22
2869-22HD
MPT-2967-22GG
MPT-2869-22HD
2646-20
MPT-48-11-1862
M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (2 Pk) (48-11-1862)
6 D
ATOMIC ™ 20V MAX * 3/8” CORDLESS IMPACT WRENCH WITH HOG RING ANVIL (TOOL ONLY)
20V MAX * CORDED/CORDLESS AIR INFLATOR
Features: • Strong Performance - Up to 300 ft-lbs. of max fastening torque and 450 ft-lbs. of max breakaway torque • Enhanced user control in a variety of applications with 4 speed settings • Helps prevent overtightening and fastener run-off with PRECISION WRENCH™ Control • Brighten dark workspaces with onboard LED and brightness control
Features: • High-pressure inflation mode with automatic shutoff • High-volume inflation and deflation modes • LED light helps to provide illumination • Three power sources** for inflation on a jobsite and on the go (**20V MAX*) • Convenient onboard accessory storage
BDT-DCF923B
BDT-DCC020IB
20V MAX * XR ® 1/2” HIGH TORQUE IMPACT WRENCH KIT WITH HOG RING ANVIL
20V MAX * XR ® BRUSHLESS CORDLESS HANDHELD BLOWER
Includes: • DCF900 Impact wrench • (2) DCB205 20V MAX* 5.0Ah Battery • DCB1104-BR Charger • Kit bag
Features: • Up to 450 CFM of air volume and up to 125 mph with concentrator • Innovative axial fan design that maximizes on air output and run time • Low noise during operation - 62 dB(A), ideal for noise sensitive regions and properties
BDT-DCF900P2
BDT-DCBL722B
20V MAX * 4.5”/5” GRINDER (TOOL ONLY)
20V MAX * CORDLESS JOBSITE FAN
20V MAX * 14” FOLDING STRING TRIMMER
Features: • Folding hinge to fit into small storage spaces** • Reduced length when folded for easy transportation**
Enhance performance and comfort on hot work days with the 20V MAX* Cordless Jobsite Fan which delivers a powerful, concentrated air flow. With 20V MAX* compatibility, you can power this tool with the same battery you use with your other adaptable cordless tools.
Features: • 8,000 rpm motor provides high power for cutting and grinding applications • Quick-Change™ Wheel Release allows tool free wheel removal without need for a wrench • Tool-free guard allows for quick and easy guard adjustments/positioning
BDT-DCG412B
BDT-DCE512B
BDT-DCST922B
W5330-K12 W5350-K12
W5133
W7153
G5351 (bare tool)
G5351-K22 (kit)
W7153-K22
W9691-K4E
Number
Description
Includes
Price
G5351 Grinder, (2) BL2022 20V 5Ah batteries, BC1121 12/20V battery charger, Type 1 cutting guard, Type 27 grinding guard, handle, flange, nut, spanner wrench, charger cord manual G5351 Grinder, Type 1 (Cutting) Guard; Type 27 (Grinding) Guard; Handle, flange, nut, Spanner Wrench, Manuals. Bare tool
IQ V20 Cordless Angle Grinder & Cut-Off Tool 2 Battery Kit 20V Cordless Angle Grinder and Cut-off Tool, 8000 RPM, 1HP, 4.5” Wheel, Bare tool 3/8” 20V Cordless Impact Wrench, 550 ft-lb Torque, Friction Ring Retainer, Pistol, Bare Tool 3/8” IQ V20 Series Cordless Right Angle Impactool™ Kit 1/2” IQ V20 Series Cordless Right Angle Impactool™ Kit 1/2” DXS2 20V Cordless Impact Wrench, 1500 ft-lb, Friction Ring, Bare Tool
ING-G5351-K22
HIGH TORQUE EXTENDED ANVIL 1” CORDLESS IMPACT WRENCH • 20V batteries deliver up to 250 fasteners per charge • 6” extended anvil for better access • IQV Power Control System - easily switch between Max, MID or SNUG modes quickly • Drive Size: 1” Long • RPM: 89
ING-G5351
ING-W5133
W5133 Bare tool
• Full Forward Torque: 3000 Nm • Nut Busting Torque: 4000 Nm
W5330 3/8” Right Angle Impactool™, (1) 2.5Ah battery (BL2012), charger, case W5350 1/2” Right Angle Impactool™, (1) 2.5Ah battery (BL2012), charger, case
ING-W5330-K12
K2E 2 Battery Kit Includes: 6” Extended Anvil Tool, (2) BL2022 5.0 Ah Batteries and (1) Dual Bay Charger
ING-W5350-K12
ING-W9691K2E
ING-W7153
W7153 Bare tool
K4E 4 Battery Kit Includes: 6” Extended Anvil Tool, (4) BL2022 5.0 Ah Batteries and (1) Dual Bay Charger
W7153 Impactool™, charger, (2) IQV20™ 5.0Ah Lithium-Ion batteries (BL2022)
ING-W7153-K22
DXS2 1/2” 20V Cordless Impact Wrench Kit
ING-W9691K4E
7 D
50-PC. TORSION IMPACT BIT SET Includes: • (6) Phillips • (2) Square Drive • (5) 2” Metric Hex • (5) 2” SAE Hex • (7) 2” Star • (4) 5” Star • (5) 5” Metric Hex with Ball Tip • (5) 5” SAE Hex with Ball Tip • (1) Slotted
45-PC. POWER BIT SET Includes: • (3) Square
60148
9229
9200
Drive Adapters: 1/4”, 3/8”, 1/2” • Magnetic Bit Socket • Swivel Head Quick Release • (20) 1” Long Bits: • (4) Phillips: 0, 1, 2, 3 • (4) Pozi Drive (PZ): 0, 1, 2, 3 • (4) Hex: 3, 4, 5, 6mm
30520
3018002
9215
DRILL BITS & SETS
ATD-9215 ATD-9229
5-Pc. Left-Handed Titanium Coated Drill Bit Set - 5/64”to 19/64”- for use with screw extractors
29-Pc. Titanium Coated Drill Bit Set - 1/16” to 1/2”, metal index
5-Pc. Step Drill Bit Set - 1/4” shank: 3/16” to 12/2” holes in 1/16” steps, 1/8” to 1/2” holes in 1/32” steps; 3/8: Shank: 1/4” to 3/4” holes in 1/16” steps, 3/16” to 7/8” holes in 1/16” steps, 1/4” to 1-3/8” holes in 1/8” steps, metal case 5-Pc. Left-Hand, Cobalt Alloy Steel Drill Bit Set - 5/64”, 7/64”, 5/32”, 1/4”, 19/64”, pouch 29-Pc. General Purpose Drill Bit Set - 1/16” to 1/2” in 1/64” increments, metal index 29-Pc. Cobalt Alloy Steel Industrial Drill Bit Set - 1/16”to 1/2”in 1/64”increments, metal index
• (4) Slotted : 5-6, 6-8, 8-10, 10-12 • (4) Tamper Proof Torx: 15, 20, 25, 30
ATD-9200
• (20) Nut Setters: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2” SAE; 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12mm
• (2) 6” Adapters
• (2) 2-1/2” Adapters • (2) Chucks • (1)2-3/4” Adapters • (3) 2-1/2” Socket Drivers
ACE-30520 ACE-60148
ATD-545
ATD-551
ACE-3018002
VIS-10231
Unibit HSS Step Drill Bit - 1/8” to 1/2” in 13 steps - SAE, self-starting
AUTOMATIC CENTER PUNCH • 5-1/4” L x 9/16” Dia., point Dia. 0.07” • No Hammering - built-in mechanism delivers a punch just with the pressing of the head. • Variable depth impression simply by turning the knurled head. Screwing the cap downwards produces heavy indentation; progressively lighter marking can be obtained by screwing the cap upward
ATD-703
MAXVIEW ™ PREMIUM FACESHIELD • High Impact Resistant Crown Style with Ratcheting Suspension • High Impact Resistant Polycarbonate Lens • Clear Faceshield • Color: Black • Material: Nylon • 9.06” x 13.38” x .04”
FULL FACE GRINDING SHIELD • Eye and face protection while grinding and cutting • Includes clear and #3 tinted high-impact polycarbonate lenses • Meets ANSI Z87.1 specifications • 8” x 15.5” lens size • Ratcheting headgear for easy, reliable adjustments
VARIABLE SIX-SPEED 1A ROTARY TOOL KIT • Powerful 1 Amp Motor
• Six variable settings range from 10,000 RPM - 32,000 RPM • Multiple applications: polishing, carving, sanding, or cutting • Quick-change keyless chuck for easy accessory changes • Hard-shell, plastic carry case for simplified storage and organization • Included drive shaft is ideal for intricate and complex detail work • Includes ninety-nine additional accessories
ATD-3746
AFF-14200
HEAVY-DUTY BENCH GRINDERS
FOW-1915
14” CHOP SAW WITH QUICK-CHANGE ™ KEYLESS BLADE CHANGE SYSTEM
6” & 8” BENCH GRINDERS
DW756 Grinder Specifications: • Amps: 4
DW758
Features: • Powerful 15 amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability • Large cutting capacity (5” round / 4-1/2” x 6-1/2” rectangle) provides the ability to cut a wide variety of materials • Adjustable spark guard allows user to channel sparks
• Peak Horsepower: 5/8 Hp • Spindle Diameter: 1/2”
DW758 Grinder Specifications: • Amps: 4.2
• Peak Horsepower: 3/4 Hp • Spindle Diameter: 5/8”
DW756
6” 1/2 Hp Bench Grinder: • Wheel Size: 6” Dia., 3/4” face, 1/2” bore • UL Listed • Power: 1/2 Hp, 2.8 Amps • Voltage: 120V/60 Hz • No Load Speed: 3,450 rpm • Tool Weight: 21 lbs.
8” 3/4 Hp Bench Grinder: • Wheel Size: 8” Dia., 1” face, 5/8” bore • UL Listed • Power: 3/4 Hp, 4.8 Amps • Voltage: 120V/60 Hz • No Load Speed: 3,450 rpm • Tool Weight: 33 lbs.
ATD-10556
ATD-10558
BDT-DW756 6” Grinder BDT-DW758 8” Grinder
BDT-D28715
ATD-10557 32” Bench Grinder Stand
12 AMP RECIPROCATING SAW
4.5” SMALL ANGLE GRINDER WITH ONE-TOUCH ™ GUARD
8 AMP 4-1/2” TRIGGER GRIP ANGLE GRINDER • Powerful 8 Amp motor delivers performance and durability • Trigger grip handle provides better control, reach & leverage Specifications: • Voltage: 120V/60 Hz • Spindle Lock: Yes • No Load Speed: 11,000 rpm • Spindle Thread: 5/8”-11 • Wheel Size: 4-1/2” diameter • Tool Length: 14” w/ 6 ft. cord • Safety Lock-Off Switch: Yes • Tool Weight: 6.5 lbs.
Features: • Powerful 12 Amp Motor Designed For Heavy-Duty Applications • 4-Position Blade Clamp Allows For Flush Cutting And Increased Versatility • Keyless, Lever-Action Blade Clamp For Quick And Easy Blade Changes • Variable speed trigger and a 1-1/8 in. stroke length
9 AMP 4-1/2” ANGLE GRINDER Specifications: • Wheel Size: 4-1/2” • Rated Voltage: 120V, 60Hz • Multi-position handle • Power Cord: 6’-5” • Built-in lock-on switch • Lightweight, ergonomic design • Includes apanner wrench • 9 Amp, professional grade motor • Arbor Size: 5/8”-11 • Variable Speed: 3,000–11,000 rpm
Features: • 7 amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection • This product runs off of AC/DC power • One-Touch™ guard eliminates the need for a tool to adjust the guard location • 5/8”-11 spindle thread accepts a wide range of 4-1/2” accessories • Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces
FOW-1905
ATD-10504
BDT-DWE305
BDT-DWE4011
8 D
CARBIDE BURR SETS
SURFACE CONDITIONING DISCS Use with steel, stainless steel, aluminum, titanium, and alloys
8170
8-Pc. 1/4” Double Cut Carbide Burr Set - In- cludes one each: ATD-8161, 8162, 8163, 8164, 8165, 8166, 8167, 8168 in a blow molded case 4-Pc. 1/4” Long Shank Double Cut Carbide Burr Set - Includes one each: ATD-8165, 8163, 8167, 8168 in a nylon pouch
ATD-8160
ATD-3150 ATD-3151 ATD-3152 ATD-3153 ATD-3154 ATD-3155 ATD-3156 ATD-3157 ATD-3158
2” Coarse Grit, Quick Change (100 pack) 2” Coarse Grit, Quick Change (25 pack) 2” Medium Grit, Quick Change (25 pack) 3” Coarse Grit, Quick Change (25 pack) 3” Medium Grit, Quick Change (25 pack) 2” Fine Grit, Quick Change (25 pack) 2” X-Fine Grit, Quick Change (25 pack) 3” Fine Grit, Quick Change (25 pack) 3” X-Fine Grit, Quick Change (25 pack)
3150
ATD-8170
ATD-8161 ATD-8162 ATD-8163 ATD-8164 ATD-8165 ATD-8166 ATD-8167 ATD-8168
1/2” x 1” Cylinder Burr
3/8” x 3/4” Cylinder Burr
3155
3/8” x 3/4” Cylinder Burr, Radius End 1/4” x 5/8” Cylinder Burr, Radius End
3/8” Ball End Burr 1/4” Ball End Burr
3158
1/2” x 1” Tree Shaped Burr 3/8” x 3/4” Tree Shaped Burr
ALUMINUM OXIDE MINI GRINDING DISCS For general metal and wood working, light welds and blending surfaces
8160
WIRE BRUSHES AND WHEELS
ATD-87224 2” - 24 Grit Disc (25 pack) ATD-87236 2” - 36 Grit Disc (25 pack) ATD-87250 2” - 50 Grit Disc (25 pack) ATD-87324 3” - 24 Grit Disc (25 pack) ATD-87336 3” - 36 Grit Disc (25 pack) ATD-87350 3” - 50 Grit Disc (25 pack)
20-Pc. Twisted Wire Tube Brush Set - https:// atdtools.com/8320 Knot-Style Cup Brush - Wire Size: .020; Trim Length: 1”; Arbor: 5/8”-11 UNC 6” Bench Grinder Wheel - Medium Face - Wire Size: .014; Trim Length: 1-1/16”; 5/8”-1/2” Arbor 8” Crimped Wire Wheel - Wire Size: .014 coarse; Arbor: 5/8”; Face: 1”; Max RPM: 4,500 3” HD Crimped Encapsulated Wire Wheel - Width/Face: 1/4”; Arbor: 1/2”; Fill Wire: Steel
ATD-8320
8320
ATD-8228
87350
ATD-8250
ATD-8361
8361
ZIRCONIA MINI GRINDING DISCS Last longer than aluminum oxide - for pre-paint surface prep ATD-88236 2” Coarse Grit, Quick Change (100 pack) ATD-88250 2” Coarse Grit, Quick Change (25 pack) ATD-88336 2” Medium Grit, Quick Change (25 pack) ATD-88350 3” Coarse Grit, Quick Change (25 pack) GREEN ZIRCONIA MINI GRINDING DISCS For high temp alloys, stainless steel and titanium. Perfect for sanding, grinding and breaking edge
8228
ATD-8244
8244
CUT-OFF WHEELS Suitable for cutting carbon or stainless steel. 25,000 Max. Rpm (A46TBF, carbon)
ATD-8289 ATD-8893 ATD-8892 ATD-8298 ATD-8898 ATD-8897
1/16” x 3” Cut-Off (5 pack) 1/16” x 3” Cut-Off (25 pack) 1/16” x 3” Cut-Off (100 pack) 1/32” x 3” Cut-Off (5 pack) 1/32” x 3” Cut-Off (25 pack) 1/32” x 3” Cut-Off (100 pack)
88236
8289
8897
ATD-89224 2” - 24 Grit Disc (25 pack) ATD-89236 2” - 36 Grit Disc (25 pack) ATD-89250 2” - 50 Grit Disc (25 pack) ATD-89324 3” - 24 Grit Disc (25 pack) ATD-89336 3” - 36 Grit Disc (25 pack) ATD-89350 3” - 50 Grit Disc (25 pack)
TYPE III DISC HOLDERS Roll-on/roll-off style ideal for contour work, feathering and edging
89350
ATD-6601 ATD-6602
2” Type III Disc Holder 3” Type III Disc Holder
6602
6” SANDING DISC PADS
BENCH GRINDING DISCS
ATD-10551 6” Medium Grit Disc ATD-10552 6” Coarse Grit Disc ATD-10553 8” Medium Grit Disc ATD-10554 8” Coarse Grit Disc
Use with all dual action sanders - lightweight, durable, well balanced - 10,000 max. rpm
ATD-2076 ATD-2078
6” Hook & Loop Pad - 5/16” x 24 threads
6” Stick-on Pad - 5/16” x 24 threads
2076
2078
10552
10553
CUTTING WHEELS, GRINDING WHEELS, FLAP DISCS
MISC. POWER TOOL ACCESSORIES
METALMAX ™ CUT-OFF WHEELS
8294
12060
12050
ATD-8294 LIS-12050 LIS-12060
Mandrel - 1/4” shank, 3/8” arbor
Small Master Chuck Key - 4 sizes, cast alloy steel Large Master Chuck Key - 4 sizes, cast alloy steel
71985
71877
71841
FOW-71841 FOW-71855 FOW-71847 FOW-71866 FOW-71877 FOW-71985 FOW-71986 FOW-71987
Cut-Off Wheel, Metal, Type 1, 3” x 1/16” x 3/8” Cut-Off Wheel, Metal, Type 1, 3” x 1/32” x 3/8” Cut-Off Wheel, Metal, Type 1, 4-1/2” x 1/16” x 7/8”
1972929
1972917
1972921
LEN-1972917 LEN-1972918 LEN-1972919 LEN-1972920 LEN-1972921 LEN-1972923 LEN-1972929
2” Dia. x .050” thick, 3/8” arbor
• 3/8” hole fits all brands of air tools • General Purpose Metal Cutting Wheel - 14” x 7/64”, Aluminum Oxide, 1” arbor CUT-OFF WHEELS
3” Dia. x .050” thick, 3/8” arbor
4” Dia. x .050” thick, 3/8” arbor 4” Dia. x .050” thick, 5/8” arbor 4.5” Dia. x .050” thick, 7/8” arbor
Cutting Wheel, Metal, Type 1, 14” x 3/32” x 1”
Grinding Wheel, Metal, Type 27, 4-1/2” x 1/4” x 7/8”
Flap Disc, Type 298, 4-1/2” x 7/8”, ZA40 Flap Disc, Type 298, 4-1/2” x 7/8”, ZA60 Flap Disc, Type 298, 4-1/2” x 7/8”, ZA80
6” Dia. x .050” thick, 7/8” arbor
BDT-DW8001
14” Dia. x .130” thick, 1” arbor
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72Made with FlippingBook flipbook maker