43 D
41570
3472
3406
43350
FAN CLUTCH WRENCHES Number Description
Description/Contents
Price
Includes: 7/8”, 32mm, 36mm, 40mm thin, 47mm, 1-7/8”, 2”, new 52mm, and 2-1/8” driving wrenches; handle assembly; molded case. Wrenches fit FORD, GM, VW, BMW, International and Chrysler, newer Duramax and International. Use with air hammer. Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. Includes: Universal Pully Holder with pin set (5x8mm); 22mm, 36mm, 36mm, 40mm and 47mm Fan Clutch Wrenches.
LIS-43350
10-Pc. Pneumatic Fan Clutch Wrench Set
KAS-41570 Fan Clutch Wrench Service Kit
KAS-3472
Fan Clutch Wrench Set
Includes: Universal Pully Holder with pin set (5x8mm); 36mm fan clutch wrench.
Square drive cut-outs designed for use with a breaker bar for added torque or length. Accommodates the 6 most commonly used wrench sizes: 22mm, 32mm, 36mm, 40mm, 48mm and 50mm.
KAS-3406
6-in-1 Fan Clutch Wrench
59370
59350
59800
59560
89000
SERPENTINE BELT TOOLS Number Description
Description/Contents
Price
LIS-59650 LIS-59800
Ratcheting Serpentine Belt Tool
Includes: 13–19mm sockets; 3/8” and 1/2” square drives, handle assembly, extension and case.
Serpentine Belt Tool
Includes: 3/8” and 1/2” square drives, 13, 14, 15, 16, 18 and 19mm sockets, extension, handle and socket set with holder.
Includes: long bar; three Pass-Thru® design adapters (3/8”, 1/2” and 3/4”); seven Pass-Thru® design 6-point sockets (13 – 19mm); three crowsfoot (13, 14, 15mm) and storage case.
15 Pc. Serpentine Belt Tool Set with Locking Flex Head Ratcheting Wrench
KDT-89000
LIS-59370
Stretch Belt Remover/Installer
Compact, one-piece tool can be used on the front or back side of the pulley.
Double sided design allows the tool to work on both A/C and main drive pulleys when installing stretch belts on GM 5.3L, 6.2L, and 6.6L gas engines. The long tab is used on the A/C belt found on 2014 and newer GM trucks. The short tab can be used on the main drive belt found on 2019 and newer GM. Used to Install the Main Stretch Belt on Extra Deep Double Pulleys. The tool holds the belt on the pulley as the engine in rotated clockwise to install the belt. Works on 2011 and newer Ford 3.5L EcoBoost and 3.7L engines, as well as 2019 and newer GM 5.3L and 6.2L engine main drive belt.
LIS-59560
Stretch Belt Tool For GM
LIS-59350
Stretch Belt Tool For Ford 3.5l & 3.7l
10-PC. FLARE NUT SOCKET SET Works on ABS, master cylinder, coolant,
WATER PUMP SPROCKET HOLDER - ECOTEC Securely holds water pump sprocket preventing loss of timing or damage to the engine. Special half-moon design allows easier access to water pump gear bolts.
IPR SOCKET FOR FORD 6.0L AND INTERNATIONAL DIESEL Slot in tool has been modified to fit larger connectors on injector pressure regulators found on International diesels. Use with 3/8” square drive .
and diesel injection sensors. 3/8” square drive with chrome finish. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm
LIS-12030 LIS-13180 7-Pc. SAE
LIS-13800
LIS-68210
11-PC. OXYGEN SENSOR & SENDING UNIT SOCKET SET • For removal and installation of oxygen sensors, oil pressure sending units and vacuum switches • Includes a variety of socket & wrenches for use on most domestic and imported vehicles • For use with 3/8” and 1/2” drive ratchets
FORD DIESEL FUEL FILTER WRENCH • The low-profile, 3/8” drive Ford fuel filter wrench allows mechanics to access those tough fuel filters in tight quarters • Used for removal and installation on the Ford Power Stroke® diesel and International/Navistar diesel engines
VARIABLE PIN SPANNER WRENCH Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm
ATD-5405
ATD-8614
ATD-5666
FLYWHEEL LOCKING TOOL FOR 6.6L DURAMAX Works on 6.6L Duramax engines with Allison automatic
FUEL TANK LOCK RING KIT Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4” to 7-1/4” and keeps the drive centered. Works on the smaller GM serrated rings and traditional rings.
VENT CAP WRENCH FOR DAVCO Double-ended wrench removes vent cap on top of Davco chassis mount- ed fuel filter system canisters
UNIVERSAL CAMSHAFT BEARING TOOL Includes: Driving shaft, driving shaft extension, expander unit, (5) split driving plugs, (2) driving collars, centering cone and molded case.
transmissions. Saves time by locking the flywheel at the transmission.
LIS-22100
LIS-62970
LIS-18000
LIS-61070
Made with FlippingBook flipbook maker