44 D
HARMONIC BALANCER PULLER SET This kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge. Includes new interchangeable puller jaws for .6L V6 Chevy Camaro and Dodge 5.7L Hemi.
HARMONIC BALANCER INSTALLER KIT Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford includ- ing 3.5L and 4.0L.
19MM HARMONIC BALANCER SOCKET FOR HONDA Use on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. 1/2” drive.
LIS-53790
LIS-54810
LIS-77080
LATE MODEL HARMONIC DAMPENER PULLER & HOLDING TOOL SET • 3-jaw puller with 3/4” hex for wrench or socket use • (4) lengths of forcing rods • Forcing screw with 3/8” square drive for ratchet use • Chrysler harmonic balancer holding tool
HARMONIC BALANCER PULLER SET • Heavy-duty, flange-type puller easily pulls harmonic balancers, timing gears and other parts with bolt circle diameters from 1-1/2” to 4-5/8” • Works on most cars - large and small, foreign and domestic • Will pull parts with tapped holes like flywheels, gears and pulleys
RATCHETING HARMONIC BALANCER PULLER • Eliminates the need to remove major engine components • Ratcheting function holds jaws in place during application • Ratcheting yoke has a 7-ton pulling capacity
ATD-3039
ATD-3041
ATD-3075
TIMING TOOLS
PRO LASER TACHOMETER • High intensity laser beam detects from 6 ft. • Measures up to 99,999 rpm in 1 rpm increments and can be used to mea- sure rpm on gas and diesel engines • Memory function saves max. and min. rpm readings
INDUCTIVE TIMING LIGHT • Inductive pickup for easy hookup • Works on conventional and electronic 12V ignitions • Replaceable flash tubes and wire lead set • Accurate up to 8,000 rpm
DIGITAL TACH/ADVANCE TIMING LIGHT • Brilliant Xenon flash
• Detachable, replaceable cable set • Works on 12V electrical systems • Accurate up to 9,000 rpm • Measures ignition spark advance from 0–90˚
ATD-5582
ATD-5595
ESI-125
TIMING TOOL FOR FORD 3.5L TURBO Updated design is thicker for more strength. Surfaces are precisely machined for an exact fit. The tool helps ensure camshaft alignment during the removal and installation of the timing chain.
FORD TIMING TOOL KIT 4.6L, 5.4L, 6.8L • Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines • This comprehensive kit includes the following tools:
19-PC. FORD/MAZDA MASTER TIMING KIT • Comprehensive tool kit services Ford,
Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines • Used on EcoBoost, Duratec, Flex Fuel & GTDI engines from mid-90’s through today’s models
• 5050 - Crankshaft Positioning Tool to lock crank during service • 7639 - Valve Spring Compressor for removal on Triton 3V engines • 7640 - Camshaft Locking Set to lock cams during timing service
LIS-37230
CCT-6670
CCT-5063
61380
61180 61190
SHOCKIT ™ O2 SENSOR REMOVAL KIT WITH HD EVA FOAM TRAY The Shockit™ O2 Sensor Removal Kit, powered by an air hammer, effortlessly removes frozen or obstructed O2 sensors
SHOCKIT ™ SOCKET DIESEL NOX & PARTICULATE SENSOR REMOVAL KIT Remove even the most stubborn diesel exhaust sensors
COMPACT WRENCHES FOR DAVCO AND PACCAR High strength laser-cut steel for durability
LOC-LT996D
LOC-LT994FM
Number
Applications
Price
Any diesel engine found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North America, Kenworth, Mack, Navis- tar, Peterbilt, Thomas Built Buses and Volvo. Detroit Diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America and Volvo. 3/8”Square drive. Works on fuel filters found on Kenworth, Peterbilt and Cummins diesels.
LIS-61180
CHRYSLER CAM PHASER MASTER SET VVT & VVL Includes: 2 camshaft phaser holders, 5 timing chain holders & L-pin Applications: 2011-2022 Chrysler, Dodge & Jeep models
11-PC. GASKET HOLE PUNCH SET • (10) punch sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 1”, and long driving mandrel
LIS-61190
LIS-61380
KAS-950
CCT-5001
Made with FlippingBook flipbook maker