52 D
UNIVERSAL DISC BRAKE CALIPER TOOL • (5) adapters for 2- and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot
2-PC. TRUCK ANCHOR PIN BUSHING DRIVER Includes an 11-1/2” long driver that allows bushings to be driven straight
without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Also removes truck leaf spring bushings.
18-PC. DISC BRAKE CALIPER TOOL SET • For use on most domestic and import 2WD and 4WD vehicles • Use on front or rear disc brakes • Includes tools and adapters for both right- and left-handed threads • Use on main brakes and parking brake systems
AIR BRAKE SERVICE TOOL KIT • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Works on manual and automatic slack adjusters • Includes 2 slack adjuster pullers and a brake clevis pin press
LIS-25000
LIS-29090
ATD-5165
ATD-5164
BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN • Adapter will work on right or left hand rewind calipers • 2 Pin range is from 1/2” to 1-1/2” • 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive
11-PT. TRUCK BRAKE CALIPER SOCKET • 11 Point Socket for Air Disc Brake Caliper Adjustment • Works on Bendix ADB 22X, ADB 225, SN6, SN7, SK7 air disc brake
LIS-25200
LIS-29120
10-PC. BEARING RACE AND SEAL DRIVER KIT • Includes driver handle and (9) adapter sizes • Range: 1-1/2” to 3” • Easier to install bearing races and seals without damage to race, axle housing or brake rotors
FRONT WHEEL DRIVE BEARING ADAPTER KIT Includes: • (13) Bushings • (2) Sleeve Plates • (4) Sleeves • Sliding Screw, Spacer, Nut and Washers
BRAKE SPRING FORK • The tip design cradles the return spring to keep it from sliding off. Heat treated material and extra-long shaft provides strength and stability. Ergonomic handle for comfort.
BRAKE SPRING BAR • Lever action against the axle eliminates need for wrenches, pry bars and screwdrivers. • Tool is 18” long with a molded handle for comfort.
ATD-8625
ATD-8622
LIS-40030
LIS-39770
SMALL BRAKE CALIPER PRESS • Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers • ACME screw for durability • Size Range: .95” to 2.25”
17-PC. BRAKE CALIPER SOCKET SET • Complete coverage for most foreign and domestic brake caliper applica- tions • Includes specialty brake caliper bits and sockets in one set
KAS-277
T.O.M.C.A.T. AIR ASSISTED CAMBER ADJUSTMENT TOOL • 2’ air hose and air bladder • Air control valve for inflating and controlled deflating • Safety relief valve to prevent overinflating
BRAKE CALIPER PRESS • Works on twin & quad piston fixed calipers,and single & twin piston floating calipers • Size Range: 1.5” to 3”
Set Contains: • 1/4” Drive Bit
• 1/2” Drive Bit • (6) 3/8” Drive Bits • (9) 1/2” Drive Sockets
ATD-5117
JDO-TC614
KAS-279
HEAVY-DUTY BEARING RACE AND SEAL DRIVER SET • Fits most Class 8 over the road trucks and trailers, and some medium duty trucks. • Use the tapered driver side for bearing races and the flat side for seals. Includes (6) drivers and handle
MASTER PNEUMATIC BEARING RACE AND SEAL DRIVER SET • (11) drivers to fit automobiles and trucks up to 1 Ton • Drivers can be used on bearing races and seals • Range: 1-1/2” to 4-1/2” • (2) handles, (1) for hammering and (1) for use with an air hammer
2-PC. AUTOMATIC SLACK ADJUSTER TOOL SET • Specifically designed for installation and servicing of Meritor air brake systems • 5/16” double-square head reversible wrench with built-in ratcheting mechanism is offset to provide increased clearance
BENDIX/KNORR-BREMSE AIR DISC BRAKE PAD RETAINER TOOL • The only tool for servicing Bendix/Knorr-Bremse air disc brakes
LOC-LT891
ATD-5166
SLACK ADJUSTERS
extension for driving bearing races and seals on hubs with deep brake drums without removing the drums. • Range: 3-43/64” to 6”
7578
8569
KAS-4651 Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench KAS-7578 7/16” Haldex Slack Adjuster Wrench KAS-8569 9/16” Bendix Slack Adjuster Wrench
LIS-61900
LIS-12800
4651 (both tools)
BRAKE CLEVIS PIN PRESS Spring-loaded plunger automatically centers the press on the brake clevis pin, for easy removal.
2-IN-1 S-CAM BRAKE TOOL
SLACK ADJUSTER ROD PIN PRESS Spring-loaded plunger automatically centers the press on the slack adjuster rod clevis pin, for easy removal.
DISC BRAKE PISTON TOOL Rotate the parking brake activated piston back
Comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers.
into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes
DUAL PISTON BRAKE CALIPER COMPRESSOR • Compresses brake piston in seconds making dual piston pad replacement an easy job
SPEEDY BRAKE PAD SPREADER • Compresses brake pad in seconds making brake pad replacement an easy job
LIS-41840
LIS-41850
ATD-5163
ATD-5060
LIS-24300
LIS-25750
Made with FlippingBook flipbook maker