67 D
DUAL TEMPERATURE HIGH OUTPUT HEAT GUN Features:
DUAL TEMPERATURE HEAT GUN KIT Features: • Great for stripping paint, removing decals and stripes, shrinking wire wrap, etc. • (2) Heat settings: 700˚ F and 925˚ F • Wattage: 1000W (low setting) 1500W (high setting) • Three-position rocker switch: high/off/low • UL & cUL listed Includes: • Dual temperature heat gun • Large deflector nozzle • Reduction nozzle • Small deflector nozzle • Reflector nozzle • Molded plastic storage case
• Low and high heat settings with a temperature range from 158˚F to 1,112˚F • Perfect for curing adhesives, removing decals/stripes, drying body fillers/ paint, shrink tubing, etc. • Durable die-cast metal housing • Adjustable, removable stand for cool down or hands-free use Specifications: • Temperature Range: 158˚F to 1,112˚F • Wattage: 1,500 • CFM: 14 Low, 17 High • Cord: 6 ft. length, 14AWG • Voltage: 120V • cETLus approved
ATD-3739
ATD-3736
7-PC. HEAVY-DUTY BODY AND FENDER TOOL SET Features:
• Fiberglass hammer handles for long service life • (3) Body hammers with excellent balance and feel • (4) Dollies for most common shapes and profiles Includes: • Pick Hammer • Spoon Dolly • Body Hammer • Heel Dolly • Bumping Hammer • Combination Dolly • Universal Dolly • Molded Storage/Carrying Case
DOOR UPHOLSTERY REMOVER
ADJUSTABLE INDEXING TRIM CLIP PLIERS • Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation • Steel construction with a double-dipped textured, grip
Place the tool under the edge of the door panel and insert into fastener as far as possible...then simply pry up. Rugged tool with a large com- fortable handle.
LIS-35400
ATD-4030
AIR WINDSHIELD REMOVER WITH 3-PC. BLADE SET
MTI-54
COMPOSITE PINSTRIPE REMOVAL TOOL KIT • Pinstripe Removal Tool w/ Safety Lever (Model 203) • (12) Smart Eraser® Pads
MUSCLE MAX 10 LBS. HEAVY-DUTY DENT PULLER SET • 10 lbs. slide hammer • (2) Pipes
• Sealant cutter that cuts around bonded and encapsulated glass • Efficiently cleans and smoothes moldings after glass removal • Includes: 57mm Bent Blade, 52mm Bent Curved Blade, 35mm Flat-Nose Straight Blade
• (5) Plates
AST-232
AST-WINDKO
• 2-hole pipe
• 7/8” x 14 thread pitch for accessories
• Hex nut
• 26.75” long
DELUXE WINDSHIELD REMOVAL TOOL • Durable aluminum combined with steel cable pull handle • Cuts caulking compound around windshield fast and easy
Smart Eraser ® REPLACEMENT PADS
• Chain and hook
• Shipping Weight: 25.3 lbs.
• Molded storage case
AST-400E (Each) AST-400E6 (6 pack)
ATD-5160
27-PC. TRIM PANEL AND SCRAPER TOOL SET • Designed for safe removal of door panels, fascia and trim strips, window moldings, dashboard and interior panels & trim, etc. • Made of impact resistant plastic that will not mar surfaces like metal tools • Slim design for delicate work in tight areas
HEAVY-DUTY DENT PULLER • Heavy-duty dent puller/slide hammer with vinyl cushion
ATD-6516
(6) REPLACEMENT BLADES FOR ATD-6516
finger grip handle • Puller comes with
ATD-6517
extra screws and hook for pulling bearings and seals • Shaft 1/2”-20 thread
• Custom canvas storage pouch keeps tool organized • Visit www.atdtools.com for list of included tools
18” URETHANE CUT OUT KNIFE • Extra reach to cut hardened urethane down • Heavy-duty steel and aluminum construction
ATD-85827
ATD-7541
11-PC. TRIM REMOVAL TOOL SET Includes:
SLIDE HAMMER PULLER SET
• Ergonomic cushion grip handle • Use with standard utility blade
• Wide-type Remover • Pull-type Remover • Handy Remover • Narrow-type Remover
ATD-8562
• 8 function internal or external 3-jaw puller • Internal or external 2-jaw puller • 5 lbs. heavy-duty hammer
• Upholstery Clip Remover • Angled Clip Panel Remover • Fork Tip Flat Clip Panel Remover • Clip Panel Remover • Sharp Tip Flat Clip Panel Remover • Panel Remover • Blunt Tip Flat Clip Panel Remover
24” URETHANE CUT OUT KNIFE • Made of rigid aluminum that will not flex • Flush securing screws prevent dash and molding damage • Long range provides cutting leverage and distance needed in today’s long dash windshields • Vinyl non-slip grip • Use with utility knife blade
• Puller hook, rear axle puller • Special grip wrench adapter • 5/8”x 18 threaded end
ATD-3045
ATD-8584
2-PC. PUSH PIN PLIER SET • 30˚ and 80˚ Offset Push Pin Pliers
3-PC. BODY CLIP SET • 30˚ and 80˚ Offset Push Pin Pliers • Panel Clip
ATD-8563
STUBBY AIR SLIDE HAMMER • BPM: 1200 • Recommended Running Pressure: 90psi • Average Air Consumption: 3.0 CFM • Spindle: 5/8” x 18 • Extension Rod: 5/8” x 18
Pliers with “V” design for removal of standard clips without center pins
14-PC. SLIDE HAMMER & PULLER SET • Autobody dent puller attachments • 3/8-16” threaded slide screw • 2 lbs. slide hammer • Maximum reach of 2-1/2”
AST-658
MTI-49700
KDT-41850
KDT-41840D
Made with FlippingBook flipbook maker