Component
Description/Quantity
Miscellaneous items
Wireless mouse
•
Starrett mouse pad
•
SD card for image storage
•
5.3 Unpacking the System
Tool Requirements
The following items are required to uncrate and install an KMR system:
• Battery powered drill with Phillips bit (to remove top and sides of shipping crate)
Metric hex wrench
•
Procedure
The KMR system is shipped in a single wooden crate. To unpack the system, refer to the following figures and perform the following steps: 1. Locate the fourteen screw locations that are marked in red on the crate. Refer to the following figure. 2. Using a power screwdriver, remove the eight Phillips screws from the lid and the six Phillips screws from the front side of the crate.
Figure 8. KMR Crate with Screw Locations in Red
3. Carefully remove the contents of the crate from the open side. The monitor and Mx200 DRO are included in separate boxes.
4. Verify that your system is complete as listed in the previous table.
Made with FlippingBook - professional solution for displaying marketing and sales documents online