2. Using a metric hex wrench, remove the two M4 socket head cap screws that secure the tab.
3. Store the tabs and their mounting screws for a possible later move of the equipment.
5.5 Installing and Setting Up the System
To install and setup the system, perform the following steps:
1. Ensure the shipping tabs have been removed from the system and all components have been removed from the individual boxes. Refer to the previous section.
1. From the System Controller column, attach the Mx200 DRO to the bottom VESA mount.
2. From the System Controller column, slide the monitor onto the top VESA mount.
3. Attach the HDMI cable coming from the System Controller column to the side of the monitor. Refer to the following figures. 4. Attach the power cable to the USB type-C port on the side of the monitor. Refer to the following figures.
USB Type-C Port for Power Cord
Figure 11. Monitor Control Panel
Figure 12. HDMI and Power Cable Connections
Made with FlippingBook - professional solution for displaying marketing and sales documents online