5. Connect the Mx200 unit as follows. Refer to the following figures.
a. Attach the Mx200 12V power supply connector (positive tip) to the power input port on the Mx200 readout. Refer to the following figure. b. Connect the remaining end of the power supply 2-wire line cord cable to a stable 110/220 AC power source. c. Attach the X and Y encoder cables to the inputs on the back of the unit. The input is labeled X or Y accordingly. Refer to the following figures.
Figure 13. Mx200 Encoder and Power Connections
Figure 14. Mx200 Encoder Connections
6. Connect the HDMI cable from the System Controller to the KMR system column.
7. Connect the DB9 power cord from the System Controller to the KMR system column.
8. Plug the power cord from the System Controller to an AC power outlet.
Made with FlippingBook - professional solution for displaying marketing and sales documents online