HDMI cable connection to KMR unit
DB9 power cable to KMR unit
AC power connection
Figure 15. System Controller Rear Panel with Cable Connections
HDMI Cable
DB9 Power Cable
Figure 16. KMR Unit Connections
5.6 On-Site Functional Test, Calibration and Training All SKE vision metrology systems and optical comparators are calibrated at the factory prior to shipment; however, it is possible that components may have moved during shipment. A complete functional test and calibration are recommended following physical installation. Professional system installation is available for all KMR systems and is quoted as a separate line item. As part of its setup services, SKE oversees the equipment’s in -plant transportation to its permanent location and uncrating. SKE then performs the physical setup and electrical connection, followed by a completed functional checkout. This typically takes 1/2 day for a KMR system. The system is then allowed to temperature stabilize overnight. On-site calibration normally takes place on the day following setup. Calibration uses NIST- traceable glass grids and gage blocks. Calibration typically takes 1/2 to 1 day for a KMR system. On-site basic operator training is provided following calibration. This typically takes 1/2 day for a KMR system. Many customers choose to augment basic training with additional hands- on training, where new operators program parts of the type on which they will be working. Training is with the new equipment and is limited to 1 to 3 people, so that these can all get hands-on time. SKE’s objective is to create “ power users, ” who can then train other users when needed.
Made with FlippingBook - professional solution for displaying marketing and sales documents online