6 Operating the System
This section provides the following information on operating the KMR system:
Powering on the system
•
Using the system controls
•
• Setting focus, magnification, and lighting for the system
Using parts fixturing
•
Accessing the KMR camera
•
6.1 Powering On the System
The power on the KMR system, perform the following steps:
1. Ensure power cables are plugged into an appropriate AC power outlet.
2. Press the power button on the front of the System controller.
Figure 17. System controller Power Button
3. Press the power button on the left side of the monitor. Refer to the previous figure.
4. Press the Power button located in the bottom left corner of the Mx200 keypad.
Allow Mx200 boot sequence to complete.
Figure 18. Powering On the Mx200 Unit
Made with FlippingBook - professional solution for displaying marketing and sales documents online