6.3 Adjusting Focus
To adjust the focus of the KMR system, raise and lower the optical head using the Z axis hand wheel. Following are guidelines for setting focus:
• The object to be viewed will be in best focus at a specific height.
• Use the two large knobs on the side of the Z-column for height adjustment.
• Focusing is most sensitive at the highest magnification.
6.4 Setting Magnification
Set magnification by turning the knurled adjustment in front of the zoom optics to one of its six detent positions. Following is additional information on magnification: • With parfocal zoom optics used the KMR system, the image will stay in focus regardless of magnification. • You might want to set focus at highest magnification, then reduce magnification and increase the field of view.
• The system is calibrated for all six zoom detent positions.
6.5 Setting Illumination
KMR systems with dedicated zoom optics are shipped with LED substage illumination that is optimized for these optics. No action is required by the user. Use the Profile or Ring light dimmer knobs on the System Controller to increase or decrease lighting from the profile or ring light.
6.6 Using and Adjusting the Camera
The following provides basic information on the using and adjusting the camera.
Default Settings
The HDMI camera included with the system includes numerous options and settings. The following options are set by default.
Auto Exposure: Off
•
Crosshairs: On
•
Accessing Camera Settings
To access camera settings and operations, do the following: • Move the cursor to the left of the screen to display the Capture and Setting icons. Refer to the following figure. • Move the cursor to the right of the screen to display the shortcut buttons. Refer to the following figure.
• Right click to enter the calibration and measurement module.
Made with FlippingBook - professional solution for displaying marketing and sales documents online