Number
Function
Description
7
Polygon
Measure polygon perimeter or area. Selectable to have the data of perimeter or area.
8
Perpendicular
Measure the perpendicular length.
9
Concentric circles
Obtain the diameters of two concentric circles.
10
Bicircle
Obtain the distance between two circles’ center points .
11
Angle
Measure an angle.
12
Setting
• Set the measurement width, color, and font color. • Magnifier On/off: Switch on/off the magnifier. When the magnifier is switch on, the cursor located area will be zoomed in and placed at the corner to help accurately locate the measurement point. Select to export the measurement results to an Excel or text file. The exported results will be saved to an SD card. Enables the user to create 10 groups of calibration files in the calibration table and to select 10 groups of files to do measurement.
13
Save Results
14
Set Scale
15
Exit
Exit the measurement.
6.7 Fixturing Parts and Skew Control Parts must be fixtured securely to prevent part movement during measurement. In addition, proper alignment of the part to the stage can aid in measurement. If the part is off-axis from the stage, X-Y-Z measurements will not correlate as well with the part dimensions. Aligning the part with the X, Y and Z axes of the system will improve dimensional measurements. Orientation errors, or skew errors, can also be removed by creating a reference frame based on the part before taking measurements. Refer to the MetLogix Mx200 User’s Guide for details. The following figure provides the location of the tooling holes on the system. Use these locations to customize the system to your operating requirements.
Made with FlippingBook - professional solution for displaying marketing and sales documents online