HARNESS FITTING INSTRUCTIONS
Before using a B-Safe harness, users should do a pre-inspection of the harness including webbing, metal fittings connection points, and labels for damage. Refer to your B-Safe instruction booklet and if in any doubt contact your supervisor, supplier or B-Safe for advice. The date of entry into service should be recorded in the instruction booklet provided.
STEP 1
STEP 2
STEP 3
Rotate harness and insert elbow into arm loop and then place arm through the loop, release shoulder strap and place other arm through the other shoulder loop and let harness fall onto the shoulders. Ensure the harness is fitted correctly without any webbing twists over the shoulders.
Hold the harness with the dorsal D facing away from you, place the shoulder straps of the harness over your hands (as shown) and hold the harness open.
Hold the harness by the rear dorsal connection D ring and gently shake the harness to untangle the straps. Ensure the leg straps are free and not buckled up. Ensure all straps are fully extended. Whilst holding the harness by the dorsal D, carry out a pre-use inspection of the components, webbing, stitching and buckles. Check labeling to identify the withdrawal from service date has not passed.
Note: Please refer to the B-Safe Technical Guide and User Manual for further information
HARNESS FITTING INSTRUCTIONS
B-SAFE CATALOGUE
8
Made with FlippingBook - professional solution for displaying marketing and sales documents online