HARNESS FITTING INSTRUCTIONS
VIDEO INSTRUCTIONS
Watch a video tutorial for further information and more in depth instructions.
STEP 4
STEP 5
STEP 6
Adjust shoulder straps first to ensure that the rear dorsal D is located between the shoulder blades in the centre of the back. Then adjust chest and leg straps to a firm fit, and slide webbing keepers along to hold free webbing in place. When using the front attachment points, both loops must be connected as per AS/NZS 1891.1.
Buckle all straps prior to adjusting the fit. Locate chest strap and pass the smaller buckle plate through the other chest strap buckle (As shown in the "How to assemble buckles" diagrams). Hold buckle and pull webbing to tighten straps to a firm and comfortable fit and slide keepers along the leg strap webbing to hold free webbing.
Locate the leg straps and ensure the left leg strap is connected to the left hip buckle and the right leg strap is connected to the right hip buckle. Ensure the straps are not twisted and the loose webbing end is always on the outside, away from the body. Hold buckle and pull webbing to tighten straps to a firm and comfortable fit and slide keepers along the leg strap webbing to hold free webbing.
HOW TO ASSEMBLE BUCKLES
1 2
3 4
Note: Please refer to the B-Safe Technical Guide and User Manual for further information
HARNESS FITTING INSTRUCTIONS
B-SAFE CATALOGUE
9
Made with FlippingBook - professional solution for displaying marketing and sales documents online