® ESSENTIAL UTILITY PRODUCTS
Pigment Cleaner Plus #HSMPIG 1 gal.
Tank Cleaner # HSMTAN 1 quart
Tank Cleaner
PRINCIPAL FUNCTIONING AGENTS Organic Amine, Inorganic Hydroxides, Surfactants and Formulation Aids ...............................................................................100% All ingredients are exempt from the requirement of a tolerance as specified in CFR 40, 180.1001 (c & d).
USE SUGGESTIONS Shake or agitate before use.
Since the amount of residue varies, individual conditions will directly affect use rates of Harrell’s Tank Cleaner. Generally, one gallon treats up to 400 gallons, one quart treats up to 100 gallons. Circulate cleaning solution throughout entire system. Use high pressure spray to clean and rinse interior of spray tank. Purge systems, spray lines and nozzles. Drain and follow with complete rinse, using clean water. Always use enough Harrell’s Tank Cleaner to completely remove all residues. Dispose of rinsate in conformance with local, state, and federal regulations. CAUTION KEEP OUT OF REACH OF CHILDREN Read entire label for additional precautionary statements. FOR PROFESSIONAL OR INDUSTRIAL USE ONLY
(800) 282-8007 | Harrells.com Post Office Box 807 | Lakeland, FL 33802 1 quart (0.95 liters) Weight per quart: 2.15 lbs.
tankclean-1QT.indd 1
1/11/2024 1:43:55 PM
INGREDIENTS Sodium Silicate, Potassium Hydroxide, Dipropylene Glycol, Surfactants
Pigment Cleaner Plus will clean most stains and residues, including pigments, spray pattern indicators, soap scum, oil, and many other stains on most surfaces. The product is ready to use without dilution.
RATES: Since the amount of residue varies, individual conditions will directly affect use rates of Harrell’s Tank Cleaner. Generally, one quart treats up to 100 gallons. Circulate cleaning solution throughout entire system. Use high pressure spray to clean and rinse interior of spray tank. Purge systems, spray lines and nozzles. Drain and follow with complete rinse, using clean water. Always use enough Harrell’s Tank Cleaner to completely remove all residues. Dispose of rinsate in conformance with local, state, and federal regulations.
Organic and inorganic acids and synthetic detergents .................................100.0%
Eco-Friendly 100% biodegradable
No toxic chemicals No VOCs
Non-flammable No harmful vapors
Directions for Use: Pigment Cleaner Plus is ready to use. Do not add water as dilution will reduce performance. For surfaces listed below, apply Pigment Cleaner Plus liberally, wait approximately 1 – 2 minutes, brush, and rinse. For older or more concentrated stains and residues, a repeat application may be necessary. Pigment Cleaner Plus can be used to pretreat stains on clothing if applied before the stain has dried.
Defoamer 2.0 # HSMDEF2 1 quart
Typical Surfaces that can be cleaned:
Defoamer 2.0
PRINCIPAL FUNCTIONING AGENTS Polydimethyl Siloxane .......................................................................................10.0% CONSTITUENTS INEFFECTIVE AS A SPRAY ADJUVANT ...............90.0% TOTAL .................................................................................................................. 100.0% CA Registration No . : 52287-50040-AA PRECAUTIONS Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not contaminate food, feed, seed or water supplies during application or when cleaning equipment. IN CASE OF SPILL OR MEDICAL EMERGENCY, CONTACT CHEMTREC 1-800-424-9300. FIRST AID If on Skin: Wash with soap and water. Consult a physician if any irritation persists. If in Eyes: Rinse with clean water for 15 minutes. Remove contact lenses after the first 5 minutes and continue to rinse. Seek medical attention if irritation persists. If Ingested: Rinse mouth. Do Not induce vomiting. Call 911 or a physician for treatment advice. Have the product label with you when calling a doctor or going for treatment. KEEP OUT OF REACH OF CHILDREN Read entire label for additional precautionary statements and use directions. FOR PROFESSIONAL USE ONLY
• Spray Tanks: wheel wells, booms, plastic wheel hubs, plastic exterior
• Plaques • Statues • Wooden benches • Tile and grout • Pool furniture • Pool decks • Swimming pool vinyl lining
• Composition tennis courts • Concrete • Stone • Stainless steel • Masonry • Porcelain • Ceramic and quarry tile
• Yardage markers • Irrigation heads • Tee markers
1 quart (946 ml) Weight per gallon: 8.34 lbs. @ 70 °F NET CONTENTS
Harrell’s, LLC | (800) 282-8007 Post Office Box 807 | Lakeland, FL 33802
#HSMDEF2 06/20
Defoamer 2.0 1QT HSMDEF2.indd 1
1/11/2024 1:04:45 PM
Defoamer 2.0 can control foaming of spray mixtures. The reduction of foam can reduce mixing and filling times and material loss caused by foaming-over of spray tanks. Harrell’s Defoamer 2.0 formula is designed to prevent foam formation as well as provide curative knock down of foam that has previously formed.
• Cart paths • Golf carts
Polydimethyl Siloane...............................................................................................10.0% Constituents ineffective as a spray adjuvant......................................................90.0%
Note: Not to be used on marble, soft stone, granite, or unfinished aluminum.
TOTAL .......................................................................................................................100.0%
RATES: Add Harrell’s Defoamer 2.0 at a rate of 1- 4 ounces per 100 gallons of spray solution.
Defoamer 2.0 – 3 Minutes After Treatment
Before Adding Defoamer 2.0
30 - Harrell’s Product Catalog
Made with FlippingBook - Online Brochure Maker