AMT 2024 Virtual Catalog

® A Gorman-Rupp Company High Head Straight Centrifugal Pumps

Pump Dimensional & Specification Data

Voltage @ 60 Hz +

‡ Ship Wt. (Lbs.)

Full Load Amps

Curve

8.2 [20.8] 10.0 [25.4] 10.0 [25.4] Maximum Solids Handling Capacity: 1/8” Diameter 14.0 [35.5] 14.7 [37.3] 14.2 [36.0] L** 8.6 [21.8] 8.6 [21.8] 8.6 [21.8] W** H 43 51 43

Model ‡

HP PH ENC

SUC* DIS* A**

B**

C**

D E

F

4893 489C 489D

7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5] 7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5] 7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5]

5.1 [13.0] 5.1 [13.0] N/A

115/230 115/230 230/460

1/2 1 ODP 3/4 1 TEFC 3/4 3 TEFC

10/5 1¼ 1 N/A 9/5 1¼ 1 5.4 [13.8] 3/2 1¼ 1 5.4 [13.8]

A

(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).

‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 4893-95) XCI (-95) Cast Iron Construction with Buna-N Seals XB (-97) Cast Bronze Construction with Viton ® Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals (All Models Come Standard with Stainless Steel Impeller)

Standard Features

• Stainless Steel Impeller • Discharge Rotates in 90° Increments • Maximum Working Pressure 150 PSI • Maximum Temperature u Viton ® 200° F u Buna-N 180° F • (4) Front Drain Plugs, Located 90° Apart • QSP – Quick Ship Pump for Many Models

• Stainless Steel, Bronze and Cast Iron Construction • Buna-N or Viton ® Mechanical Seal and O-ring, Depending on Model • Optional Silicon Carbide Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA TEFC Single or Three Phase 3450 RPM Motors,

Optional ODP Motors Available • NEMA Base Mounted Motor

Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

®

www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.

A Gorman-Rupp Company

1212 0220

STE-28

Made with FlippingBook Learn more on our blog