®
Engine Driven Dredging Pumps
A Gorman-Rupp Company
Run Time (Hours)
Tank Size (Gal/Ltr.)
Ship Wt. (Lbs.)
Pump Dimensional & Specification Data Model Port Driver Seals
316F-95
Honda GX160 OHV ▲
2.0
0.82/3.1
85
Run Time (Hours)
Tank Size (Gal/Ltr.)
Ship Wt. (Lbs.)
Silicon Carbide Mechanical Seals with Buna-N Built In Check Valve & O-rings
Model
Port
Driver
Seals
2 " NPT
316F-Z5
Hatz Diesel 1B30
2.7
110
0.79/3.0
316F-95
2.0
0.82/3.1
85
Honda GX160 OHV
Silicon Carbide Mechanical Seals with Buna-N Built in Check Valve & O-Rings
316F-Z5
Hatz Diesel 1B30 ++
2.7
0.79/3.0
110
Pedestal Ball Bearing w/ 3/4 " Keyed Shaft
2” NPT
316F-99
N/A
N/A
50
Pedestal Ball Bearing
316F-99
N/A
N/A
50
w/ 3/4” Keyed Shaft
Construction: Cast Iron with High Chromium Stainless Steel Wear Parts
Maximum Solids Handling Capacity: 1/2" Diameter ▲ Oil Alert Included
Maximum Solids Handling Capacity: 1/2" Diameter
Construction: Cast Iron with High Chromium Stainless Steel Wear Parts ++ 12VDC Electric Start (Battery Not Included) Oil Alert Included
Model
SUC*
DIS*
L**
W**
H
HP Class 🔹
Model
HP Class ♦ SUC* DIS*
L**
W**
H
5 HP 5 HP
2 2 2
2 2 2
24.0 [60.9] 31.0 [78.7] 15.1 [38.3]
19.2 [48.7] 22.5 [57.1] 8.0 [20.3]
18.6 [47.2] 23.6 [59.9] 8.9 [22.6]
316F-95
316F-95
18.6 [47.2]
2
2
24.0 [60.9]
19.2 [48.7]
5 HP
316F-Z5
2
2 31.0 [78.7]
22.5 [57.1]
23.6 [59.9]
5 HP
316F-Z5 316F-99 ✦
N/A
316F-99 🔹
15.1 [38.3]
8.0 [20.3]
8.9 [22.6]
2
2
N/A
( ✦ ) Minimum 5 HP Required
( ♦ ) HP Class represents market category and is not intended to define actual horsepower. (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".
Standard Features
• High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand • Silicon Carbide/Buna-N Mechanical Seal Resists Abrasives and Extends Seal Life • Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions • O-ring Casing Seal for Ease of Service and Cleaning • Maximum Working Pressure 75 PSI • Maximum Temperature 180° F
• Maximum Flow 173 GPM • Dual Volute Design for Hydraulic Balance • Maximum Head 101 Ft. @ Sea Water (42 PSI) • Self-Primes to 10 Ft. in 1 Minute with Maximum Lift of 20 Ft. • (2) NPT Pipe Nipples, (1) Discharge Elbow and (1) Suction Strainer Included • Heavy Duty Steel Roll Frame for Portability
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0714 0124
ENG-8
Made with FlippingBook Learn more on our blog