Interchangeable Immersion & Suction Coolant/Oil Pumps • Fully Interchangeable with Units Furnished on Most Imported Machine Tools • 1/8 to 1 HP Totally Enclosed Motors • 2 Pole, 3450 RPM • Single or Three Phase Motors • Stainless Steel Semi-Open Impeller • Cast Iron Construction • Maximum Temperature 180° F • Maximum Flow 56 GPM (Water) • Maximum Head 60 Ft. (Water) • Solids Handling and Fine Contaminant Design
Immersion Type Pump
Suction Type Pump
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps are available with a stainless steel impeller for added corrosion/erosion resistance and durability. 1/8 & 1/4 HP models are available in 115/230 VAC, 60 Hz single phase and 230/460 VAC, 50/60 Hz three phase. Motors are Totally Enclosed with sealed bearings and operate at 3450 RPM. Pumps feature semi-open impellers that are designed for handling solids and fine contaminants.
Performance of Interchangeable Coolant/Oil Pumps
60 18 [m] [ft.*]
A = 534 & 538 Series 3/8" 1/8 HP [0.09 kW] B = 535 & 539 Series 3/4" & 1/2" 1/4 HP [0.19 kW] C = 536 & 540 Series 3/4" 1/2 HP [0.37 kW] D = 537 & 541 Series 1" 3/4 HP [0.56 kW] E = 541 Series 1" 1 HP [0.75 kW]
16
E D
50
14
40
12
C
10
30
8
B
20
6
4
10
A
2
0
0
0
10
20
30
40
50
60
[U.S. gpm]
[m 3 /h]
012345678910111213
Capacity @ 3450 RPM (60 Hz)
(*)Convert to psi, divide by 2.31
Liquid - Water specific gravity 1.0
400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.
®
CLT-1
A Gorman-Rupp Company
Made with FlippingBook Learn more on our blog