• Cast Iron Construction with EPDM/EPR Seals • Easy Cleanout Pull From Rear Design • 1˝ to 2˝ NPT Port Sizes • Maximum Temperature 180° F • Maximum Flow 130 GPM • Maximum Head 100 Ft. (43 PSI) • Self-Priming up to 20 Feet with Built-in Check Valve • Self-Cleaning, Clog Resistant Impeller • Solids Handling and Dirty Water Design • 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors • Motors Feature 303 Stainless Steel Shaft 1˝-2˝ Self-Priming Chemical Pumps
Model 1SP07C-3P
Model 2SP30C-3P
Performance of Self-Priming Centrifugal Pumps
[m] [ft.]
100
A = 1SP Series 1" 1/2 HP [0.37 kW] 1SP Series 1" 3/4 HP [0.56 kW] B = C = 12SP Series 1¼" 1 HP [0.75 kW] D = 15SP Series 1½" 1½ HP [1.12 kW] W] E = 2SP Series 2" 2 HP [1.49 k F = 2SP Series 2" 3 HP [2.24 kW]
28
This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and chemical processing. Pumps are designed to handle liquids with solids content or dissolved solids and debris. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8 " diameter semi-solid and EPDM/EPR seals for liquid chemical transfer with specific gravities up to 1.3. (Verify chemical capability with liquids) Built-in check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Pumps feature Dual cycle 50/60 Hz TEFC motors.
90
F
80
24
70
E
20
60
16
D
50
40
12
C
30
8
B
20
4
A
10
0
0
[U.S. gpm]
0
20 40 60 80
100 120 140 160 180
[m 3 /h]
0
4
8 1216202428323640
Capacity @ 3450 RPM (60 Hz) Liquid - Water specific gravity 1.0
400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.
®
SPE-11
Viton ® and Teflon ® are registered trademarks of E. I. Dupont.
A Gorman-Rupp Company
Made with FlippingBook Learn more on our blog