® A Gorman-Rupp Company 3˝ Self-Priming Centrifugal Pumps
Pump Dimensional & Specification Data
Voltage @ 60 Hz +
Full Load Amps
Ship Wt. (Lbs.)
Model Curve HP PH
Frame SUC* DIS* A
B
C
L**
W**
H
13.7 [34.8] 12.0 [30.5] 13.1 [33.2] 12.0 [30.5] 13.9 [35.3] 12.0 [30.5]
17.1 [43.4] 16.4 [41.6] 17.1 [43.4] 16.4 [41.6] 18.2 [46.2] 16.4 [41.6]
29.1 [73.9] 26.6 [67.6] 29.1 [73.9] 26.6 [67.6] 31.1 [79.0] 26.6 [67.6]
2877-95 2874-95 2878-95 2875-95 2879-95 2876-95
1
230
16 10/5 21 14/7 31 20/10
184JM 182JM 184JM 184JM 215JM 184JM
3.7 [9.4] 3.7 [9.4] 3.7 [9.4] 3.7 [9.4] 4.2 [10.6]
5.5 [13.9] 4.5 [11.4] 5.5 [13.9] 5.5 [13.9] 7.0 [17.8] 5.5 [13.9]
11.8 [29.9] 11.8 [29.9] 11.8 [29.9] 11.8 [29.9] 11.8 [29.9] 11.8 [29.9]
133 149 205 173 215 176
A 3
3 3
3 208-230/460
1
230
B 5
3 3
3 208-230/460
1
230
C 7½
3
3
3 208-230/460
3.7 [9.4]
Optional Mounting Base Model A200-90 Maximum Solids Handling Capacity: 3/8" Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities). NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
Standard Features
• Cast Iron Construction with Stainless Steel Impeller • Buna-N Mechanical Seal and O-ring • Optional Viton ® Mechanical Seal and Flapper Valve Available • Optional Silicon Carbide Seal Available • 3" NPT Suction and Discharge Ports • Stainless Steel Sleeve • Dual Volute Design Reduces Radial Load on Motor
• Maximum Temperature 180° F • Maximum Flow 375 GPM • Maximum Head 110 Ft. • Self-cleaning, Semi-open Impeller • 3 to 7 1 /
2 HP Totally Enclosed Fan Cooled (TEFC)
Single or Three Phase Motors • Optional Mounting Base Available on All Above Models • QSP – Quick Ship Pump for Many Models Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
• Fill and Drain Plug for Easy Servicing • Maximum Working Pressure 125 PSI
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0120
SPE-16
Made with FlippingBook Learn more on our blog