4˝ Self-Priming Centrifugal Pumps • Cast Iron Construction with Stainless Steel Impeller • Buna-N Mechanical Seal, Check Valve and O-Ring • Optional Silicon Carbide Seal Available • 4˝ NPT Suction and Discharge Ports • Maximum Solids Handling 1/2˝ • Maximum Temperature 180° F
Model 4871-95 w/ Optional Base
• Maximum Flow 660 GPM • Maximum Head 114 Ft. • Self-Priming to 20 Ft. • Self-Cleaning,
Semi-Open Impeller • Solids Handling and Dirty Water Design • 10 to 15 HP TEFC, Single and Three Phase Motors • Optional Mounting Base Available
Performance of Self-Priming Centrifugal Pumps
[m] [ft.*]
140
A = 4871/4873 Series 4" 10 HP [7.46 kW] B = 4872 Series 4" 15 HP [11.19 kW]
40
Operation in gray area may result in damage to pump componenets and void warranty Operation in gra result in damag componenets a
120
36
(‡) NPSHr - Maximum suction lift allowable at performance point
AMT Self-Priming Cast Iron Centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. Pumps are designed to handle liquids with solids content or dissolved solids and debris. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 1/2" diameter semi- solids. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing.
32
100
B
28
A
15' lift ‡
80
24
20
10' lift ‡
60
5' lift ‡
16
0' lift
40
12
8
10' Min +Head
20
4
0
0
0 40 80 120 160 200 240 280 320 360 400 440 480 520 560 600 640 680
[U.S. gpm]
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Capacity @ 3450 RPM (60 Hz) (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0
[m 3 /h]
400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.
®
SPE-17
Viton ® and Teflon ® are registered trademarks of E. I. Dupont.
A Gorman-Rupp Company
Made with FlippingBook Learn more on our blog