AMT 2024 Virtual Catalog

® A Gorman-Rupp Company 3”-4” Self-Priming Stainless Steel Pumps

Pump Dimensional & Specification Data

Ship Wt. (lbs.)

Model

Curve SUC* DIS*

A**

B**

C**

D

E

F

L**

W**

H

6200-98 6201-98 6202-98 6203-98 6210-98 6211-98 6212-98

7.1 [18.0] 8.1 [20.6] 7.1 [18.0] 8.1 [20.6] 7.5 [19.1] 9.3 [23.6] 7.5 [19.1]

6.8 [17.3] 6.8 [17.3] 6.8 [17.3] 6.8 [17.3] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1]

18.0 [45.7] 17.3 [44.0] 18.0 [45.7] 18.8 [47.8] 19.0 [48.3] 18.0 [45.7] 19.0 [48.3]

5.5 [14.0] 5.5 [14.0] 5.5 [14.0] 7.0 [17.8] 7.0 [17.8] 7.0 [17.8] 7.0 [17.8]

7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 8.5 [21.6] 8.5 [21.6] 8.5 [21.6] 8.5 [21.6]

4.5 [11.4] 4.5 [11.4] 4.5 [11.4] 5.3 [13.5] 5.3 [13.5] 5.3 [13.5] 5.3 [13.5]

33 [84] 34 [86] 33 [84] 34 [86] 37 [94] 37 [94] 38 [97]

14.1 [35.9] 16.1 [40.9] 15.2 [38.6] 16.1 [40.9] 14.1 [35.9] 16.1 [40.9] 15.2 [38.6] 16.1 [40.9] 14.6 [37.1] 16.1 [40.9] 16.4 [41.7] 16.1 [40.9] 14.6 [37.1] 16.1 [40.9]

168 182 193 223 213 230 263

A

3

3

B

C

4

4

D

(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)

Optional Mounting Base Model A200-90

Voltage @ 60 Hz+

Full Load Amps

Model

HP PH ENC Frame

6200-98 6201-98 6202-98 6203-98 6210-98 6211-98 6212-98

5 3 TEFC 184JM 230-460 5 1 TEFC 184JM 230 7.5 3 TEFC 184JM 230/460 7.5 1 TEFC 215JM 230 10 3 TEFC 215JM 230/460 10 1 TEFC 215JM 230 15 3 TEFC 215JM 230/460

17/9

20

22/11

31

26/13

40

36/18

Standard Features

• Cast Stainless Steel Construction • Viton Mechanical Seal w/Carbon/Carbide Faces • Optional Silicon Carbide Seal Available • 3” or 4” NPT Suction/Discharge Ports • Fill and Drain Plugs for Easy Servicing • Maximum Temperature 200°F • Maximum Head up to 120’ TDH (52 PSI) • Maximum Flow up to 620 GPM

• Semi-Open Impeller with Spherical Solids Handling up to • 3” Models up to 1/2” • 4” Models up to 3/4” • Built-In Viton Flapper/Check Valve Permits Self-Priming up to 20’ • 5 to 15 Totally Enclosed Fan Cooled (TEFC) Single and Three Phase Motors • Maximum Working Pressure up to 100 PSI • Optional Mounting Base Available (A200-90) available on all models

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

®

www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.

A Gorman-Rupp Company

0216 0524

SPE-22

Made with FlippingBook Learn more on our blog