® A Gorman-Rupp Company 2˝ Self-Priming High Pressure Pumps
Pump Dimensional & Specification Data
Ship Wt. (lbs.)
Model
Curve HP PH SUC*
DIS*
A
B
C
D
L**
W**
H
4803-95 4802-95 4805-95 4804-95
A A B B
1 3 1 3
8.5 [21.6] 7.5 [19.1] 8.5 [21.6] 8.5 [21.6]
7.0 [17.8] 5.5 [14.0] 7.0 [17.8] 7.0 [17.8]
17.0 [43.2] 16.1 [40.9] 17.0 [43.2] 17.0 [43.2]
NA
30.5 [77.5] 15.8 [40.0] 26.5 [67.3] 14.3 [36.2] 30.5 [77.5] 15.8 [40.0] 29.5 [74.9] 14.3 [36.2]
13.6 [34.43] 13.6 [34.43] 13.6 [34.43] 13.6 [34.43]
222 160 305 215
7½
0.75 [1.9]
2
2
NA NA
10
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Optional Mounting Base Model A200-90
Voltage @ 60 Hz+
Full Load Amps
Model
HP Curve PH ENC Frame
4803-95 4802-95 4805-95 4804-95
1 TEFC 215JM 230
31
7½ A
3 TEFC 184JM 208-230/460 22/11
1 TEFC 215JM 230
40
10 B
3 TEFC 215JM 208-230/460 26/13
Standard Features
• Cast Iron Construction with Dual Closed Vane Aluminum Impellers • Viton Mechanical Seal w/ Silicon Carbide and Carbon Faces • Built in EPR/EDPM Check Valve permits Self-Priming up to 20 Ft. • Closed Vane Aluminum Impeller design for High Pressure Performance • Fill and Drain Plugs for Easy Installation and Servicing • 2” NPT Suction and Discharge Ports
• Maximum Temperature 180°F • Maximum Working Pressure 150 PSI • Max Flow 122 GPM • Max Head 270 Ft. (116 PSI) • 7-1/2 to 10 HP TEFC, Single and Three Phase Motors • Optional Mounting Base Available (A200-90) available on all models • QSP- Quick Ship Product for Many Models Hazardous Duty/Xplosion Proof Motors Available; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0216 0524
SPE-26
Made with FlippingBook Learn more on our blog