Inline Centrifugal Circulator Pumps
®
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Voltage @ 60 Hz
Full Load Amps
‡ Ship Wt. (Lbs.)
Model ‡ Curve HP PH ENC
A
B
C
W
H**
5690 5700 5710 5720
A B C D
2.1 [5.3] 2.3 [5.8] 2.3 [5.8] 2.3 [5.8]
3.1 [7.9] 3.4 [8.6] 3.4 [8.6] 3.4 [8.6]
3.1 [7.9] 3.4 [8.6] 3.4 [8.6] 3.4 [8.6]
6.3 [16.0] 8.5 [21.6] 8.5 [21.6] 8.5 [21.6]
13.3 [33.8] 13.5 [34.3] 13.5 [34.3] 13.5 [34.3]
25 28 28 28
1/4 1 ODP
115
5.4
‡ When ordering add the correct -9x suffix to model number indicating material selection
**This dimension may vary due to motor manufacturer specifications NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g. 230V ± 10% = 207 to 253.) 569/570/571 Series – Stainless Steel Impeller 572 series – Bronze Impeller
XCI (-95) = Cast Iron Construction XB (-97) = Cast Bronze Construction
PUMPS ARE DESIGNED TO MOUNT
HORIZONTALLY OR VERTICALLY
W Dimension Refers to Flange to Flange Width
Connection Flanges - Flange Kit Model Numbers Flanges Available - Standard NPT (Female) Pipe Thread
Flange Face to NPT Face Thickness
Model Series
3/4''
1''
1-1/4''
1-1/2''
2''
569 Series XCI 569 Series XB
C569-90 C569-91 C569-92 C569-93 C569-94 C569-95
N/A N/A
N/A N/A N/A N/A
3/4'' 3/4'' 3/4'' 3/4''
570 & 571 series XCI 570 & 571 series XB 572 Series XCI (-95) 572 Series XCI (-97)
C570-90 C570-91 C570-92 C570-93 C570-94 C570-95 C570-96 C570-97
N/A N/A
N/A N/A
N/A N/A
N/A N/A
C570-98 C570-99
1-1/2'' 1-1/2''
NOTE: NPT Flange Kits Include:2 Flanges, 2 Buna-N Gaskets, 4 Bolts and Nuts
Standard Features
• 4-Bolt Flange Allows 360° Mounting Rotation in 90° Increments • 1/8" NPT Seal Wash/Vent Port Shipped Plugged • EPDM/EPR Mechanical Seals and O-Rings • Optional Buna-N Mechanical Seal and O-Ring Available • Close Coupled Design Reduces
• High Efficiency Closed Impeller • Inline Centered Design, Centerline of Ports In Line with Motor Shaft • Maximum Working Pressure 150 PSI • QSP: Quick Ship Pump for Many Models
Manufacturer Cross Reference
Model Series
Flange to Bell & Gossett Armstrong TACO Dayton Flange Width* Series Series Series (Cast Iron)
Maintenance Requirements • Standard NEMA 56J Motor Mounting Dimensions • Stainless Steel (300 Series) Motor Shaft
569 570 571 572
6.4 8.5 8.5 8.5
100NFI HV NFI
S-25 H-32 H-41 S-35
110 4RD16 111 4RC93 113 4RC91 120 4RC95
PR
2NFI
*Refers to B Dimensions
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1021220
HVM-8
Made with FlippingBook Learn more on our blog