® A Gorman-Rupp Company Centrifugal Pumps
Pump Dimensional & Specification Data
Voltage @ 60 Hz +
Full Load Amps SUC* DIS* A
‡ Ship Wt. (Lbs.)
B**
C
E
L**
W**
H**
Model‡ Curve HP PH ENC
368A 368B 368C 370B 370F 370A 370C 370E 370D 369C 369F 369A 369B 369D 369E
1.4 [3.6] 13.0 [33.0] 8.3 [21.3] 1.4 [3.6] 13.0 [33.0] 8.3 [21.3] 6.2 [15.9] 6.2 [15.9] 6.4 [16.4] 6.3 [16.1] 6.5 [16.5] 6.3 [16.1] 6.5 [16.5] 6.3 [16.1] 6.5 [16.5] 6.3 [16.1] 6.5 [16.5] 6.3 [16.1] 6.5 [16.5] 6.3 [16.1] 6.5 [16.5] 1.2 [3.3] 14.6 [37.1] 8.8 [22.5] 1.4 [3.6] 12.4 [31.5] 8.3 [21.3] 1.4 [3.6] 13.0 [33.1] 8.8 [22.5] 1.4 [3.6] 12.4 [31.5] 8.8 [22.5] 1.4 [3.6] 13.5 [34.4] 8.8 [22.5] 1.4 [3.6] 13.1 [33.2] 8.8 [22.5] 1.4 [3.6] 13.9 [35.5] 8.8 [22.5] 1.4 [3.6] 12.4 [31.5] 8.8 [22.5] 1.2 [3.3] 13.9 [35.5] 8.8 [22.5] 1.2 [3.3] 12.4 [31.5] 8.8 [22.5] 1.2 [3.3] 14.2 [36.3] 8.8 [22.5] 1.2 [3.3] 14.1 [35.8] 8.8 [22.5] 1.2 [3.3] 15.1 [38.5] 8.8 [22.5]
8.6 [ 21.8] 8.6 [ 21.8] 7.2 [18.3] 8.6 [ 21.8] 7.2 [18.3] 8.6 [ 21.8] 7.2 [18.3] 8.6 [ 21.8] 7.2 [18.3] 8.6 [ 21.8] 7.2 [18.3] 8.6 [ 21.8] 7.2 [18.3] 8.5 [21.6] 8.5 [21.6]
A 1/3 1 TEFC 115/230 7/4 3/4 1/2 5.4 [13.7] 5.1 [13.0]
34 35 31 36 32 41 33 42 37 38 43 52 41 54 46
5.4 [13.7] 5.4 [13.7] 5.9 [14.9] 5.9 [14.9] 5.9 [14.9] 5.9 [14.9] 5.9 [14.9] 5.9 [14.9] 6.0 [15.2] 6.0 [15.2] 6.0 [15.2] 6.0 [15.2] 6.0 [15.2] 6.0 [15.2]
5.1 [13.0]
1 TEFC 115/230 9/5 3 TEFC 230/460 3/2 1 TEFC 115/230 9/5 3 TEFC 230/460 3/2 1 TEFC 115/230 9/5 3 TEFC 230/460 3/2 1 TEFC 115/230 12/6 3 TEFC 230/460 4/2 1 TEFC 115/230 12/6 3 TEFC 230/460 4/2 1 TEFC 115/230 18/9 3 TEFC 230/460 5/3 1 TEFC 115/230 22/11 3 TEFC 230/460 6/3
B 1/2
3/4 1/2
N/A
5.1 [13.0]
C 1/2
1 3/4
N/A
5.1 [13.0]
D 3/4
1 3/4
N/A
5.1 [13.0]
E 1
1 3/4
N/A
5.1 [13.0]
F 1
1
4 1½
N/A
5.1 [13.0]
G 1½
1
4 1½
N/A
5.0 [12.7]
H 2
1
4 1½
N/A
Maximum Solids Handling Capacity: 1/8” Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 368A-95) XCI (-95) C ast Iron Construction with Stainless Steel Impeller and Buna-N Seals XB (-97) C ast Bronze Construction with Viton ® Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals
Standard Features
• Stainless Steel, Bronze and Cast Iron Construction • Buna-N or Viton ® Mechanical Seal and O-ring, Depending on Model • Optional Silicon Carbide Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA 56J TEFC Single or Three Phase Motors • NEMA Base Mounted Motor • Self-cleaning Impeller
• Discharge Rotates in 90° Increments • Maximum Working Pressure 75 PSI • Maximum Temperature u Viton ® 200° F u Buna-N 180° F • Front Drain Plug • QSP – Quick Ship Pump for Many Models
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-8
Made with FlippingBook Learn more on our blog