® A Gorman-Rupp Company Stainless Steel Straight Centrifugal Pumps
High Volume Pump Dimensional & Specification Data
Ship Wt. (Lbs.)
Full Load Amps
Voltage @ 60 Hz +
Model Curve HP PH ENC
SUC* DIS* A**
B**
C** D E
F
L**
W H
5471-98 5475-98 5473-98 5481-98 5483-98 5485-98 5487-98 553B-98 5491-98 5493-98 5537-98 5495-98 5497-98 5533-98 5531-98 5539-98 5535-98
A
1/2
ODP
3/4
1/2
10.2 [26.0] 8.2 [20.8]
7.8 [14.6] 7.8 [14.6]
38 23
1
115/230
8/4
5.4 [13.8] N/A
5.1 [13.0] 5.1 [13.0]
6.4 [16.3] 6.4 [16.3]
N/A N/A
2.1 [5.5] 2.1 [5.5]
4.1 [10.5] 4.1 [10.5] 12.7 [32.2]
13.7 [34.8] 13.2 [33.5] 13.6 [34.5] 12.2 [30.1] 14.1 [35.8] 13.9 [35.3] 14.9 [37.8] 14.5 [36.8] 15.4 [39.1] 15.0 [38.1] L**
1
115/230
9/5
1¼
3/4
TEFC
B
3/4
5.4 [13.8]
N/A 6.4 [16.3] N/A 2.1 [5.5] 4.1 [10.5]
10.2 [26.0] 7.8 [14.6]
31
3
230/460 3/2
5.4 [13.8] 5.1 [13.0] 6.0 [15.4] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6]
40
1
115/230 12/6 230/460 4/2 Voltage @ 60 Hz + 115/230 18/9 115/230 18/9 230/460 5/3 230/460 5/3 115/230 22/11 115/230 22/11 230/460 6/3 230/460 6/3 Full Load Amps
1¼
1½
TEFC
C
1
35 Ship Wt. (Lbs.)
5.4 [13.8]
N/A 6.0 [15.4] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6] W H 10.6 [26.9] 7.8 [14.6]
3
Model Curve HP PH ENC
SUC* DIS* A** B**
C**
D
E
F
5.4 [13.8] 5.1 [13.0] 6.0 [15.4] N/A 1.8 [4.6] 4.0 [10.2]
49 54 44 38 51 56 49 44 60 65 53 48
1
1 3 1 3 1 3
5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8]
5.1 [13.0] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] N/A 5.1 [13.0] N/A 5.1 [13.0] N/A
0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1]
2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5]
2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6]
15.5 [39.4] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 15.3 [38.8] 16.3 [41.6] 15.8 [40.1] 16.8 [42.6] 16.3 [41.6]
12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2]
1½ 1¼ 1½ 1¼
TEFC
D 1½ G 1½
TEFC
5.4 [13.8]
10.6 [26.9] 7.8 [14.6]
N/A 6.0 [15.4] N/A 1.8 [4.6] 4.0 [10.2]
3
5.4 [13.8] 5.0 [ 12.7] 6.1 [15.6] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6]
1
2 1½ 1½ 1¼
TEFC
E
2
H 2
TEFC
5.4 [13.8]
N/A 6.1 [15.6] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6]
3
5.4 [13.8] 5.0 [ 12.7] 6.1 [15.6] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6]
1
230 230
16
16
2 1½ 1½ 1¼
TEFC
F
3
I
TEFC
5.4 [13.8]
N/A 6.1 [15.6] N/A 1.8 [4.6] 4.0 [10.2]
10.6 [26.9] 7.8 [14.6]
3
230/460 8/4
Maximum Solids Handling Capacity: 1/8” Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
Full Load Amps
Ship Wt. (Lbs.)
Voltage @ 60 Hz +
Model Curve HP PH ENC
SUC* DIS* A** B**
C**
D
E
F
L**
W H
5539-98 553B-98 5535-98 5537-98 5531-98 5533-98
1 3 1 3 1 3
115/230 18/9 230/460 5/3 115/230 22/11 230/460 6/3
5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8]
5.1 [13.0] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] 7.5 [19.1] N/A 5.1 [13.0] N/A 5.1 [13.0] N/A
0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1] 0.8 [2.1]
2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5] 2.5 [6.5]
2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6] 2.2 [5.6]
15.5 [39.4] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 9.8 [24.8] 15.3 [38.8] 16.3 [41.6] 15.8 [40.1] 16.8 [42.6] 16.3 [41.6]
12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2] 12.8 [27.2]
54 44 56 49 65 53
1½ 1¼
G 1½
TEFC
1½ 1¼
H 2
TEFC
230
16
1½ 1¼
I
3
TEFC
230/460 8/4
Maximum Solids Handling Capacity: 1/8” Diameter
Standard Features (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
• Stainless Steel Construction • Viton ® Mechanical Seal and O-ring, Optional Buna-N Seal and O-ring Available • Investment Cast Stainless Steel Impeller • Cast Iron Motor Adapter Provides Rigid Mounting • AeroSpace Fusion Welding • Stainless Steel Motor Shaft & Hardware • 1/2 to 3 HP NEMA 56J TEFC Single & Three Phase Motors • NEMA Base Mounted Motors • Maximum Working Pressure 150 PSI • Maximum Temperature 200° F • QSP – Quick Ship Pump for Many Models Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-14
Made with FlippingBook Learn more on our blog