AMT 2024 Virtual Catalog

Centrifugal Chemical Pump • Cast Iron Construction • EPDM/EPR Mechanical Seal and O-Rings • Discharge Port Rotates in 45° Increments • Solids Handling, Clog Resistant Impeller • 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors • 3/4˝ to 2˝ NPT Sizes • Maximum Working Pressure 125 PSI • Maximum Flow 180 GPM • Maximum Head 95 Ft. (41 PSI) • Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping • Multiple 1/2˝ NPT Drain Ports

Model 12ES15C-3P

Performance of Straight Centrifugal End Suction Pumps

[m] [ft.]

Model 07ES05C-3P

100

Series 3/4" A = 07ES 1/2 HP [0.37 kW] B = 1ES Series 1" 3/4 HP [0.56 kW] 1" 1 HP [0.75 kW] C = 1ES Series D = 12ES Series 1¼" 1½ HP [1.12 kW] Series 1½" 2 HP [1.49 kW] E = 15ES F = 2ES Series 2" 3 HP [2.24 kW]

28

90

F

80

24

AMT Solids Handling Centrifugal pumps are designed for continuous-duty OEM, Industrial/ Commercial and General Service applications including dirty water circulation, chemical processing, and liquid transfer. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8" diameter depending on the model. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

70

20

E

60

16

50

D

40

12

30

C

8

20

B

4

A

10

0

0

0 20 40 60 80 100 120 140 160 180 200 . gpm] [U.S

[m 3 /h]

0

4

8 1216202428323640

Capacity @ 3450 RPM (60 Hz) Liquid - Water specific gravity 1.0

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

®

STE-17

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

Made with FlippingBook Learn more on our blog