® A Gorman-Rupp Company Centrifugal Chemical Pump
Pump Dimensional & Specification Data
Full Load Amps
Voltage @ 60 Hz +
Ship Wt. (Lbs.)
Model
Curve HP PH ENC
SUC* DIS*
L**
W**
H
A** 5.4 [13.8] 5.4 [13.8] 5.4 [13.8]
B 2.6 [6.7] 2.6 [6.7] 2.6 [6.7]
C** 5.1 [12.9] N/A 5.1 [12.9]
07ES05C-1P 07ES05C-3P 1ES07C-1P 1ES07C-3P 1ES10C-1P 1ES10C-3P 12ES15C-1P 12ES15C-3P 15ES20C-1P 15ES20C-3P 2ES30C-1P
1
TEFC 115-208/230 TEFC 208-230/460
9/5 3/2 9/5
13.9 [35.3] 13.2 [33.5] 14.4 [36.5] 13.9 [35.3] 14.6 [37.1] 13.2 [33.5] 15.6 [39.6] 15.4 [39.1] 16.3 [41.4] 15.9 [40.4] 16.8 [42.6] 16.4 [41.6]
10.1 [25.7] 10.1 [25.7] 10.1 [25.7]
9.9 [25.1] 9.5 [24.1] 9.9 [25.1]
47 43 52
A 1/2
3/4
3/4
3 1 TEFC 3 TEFC 1 TEFC 3 TEFC 1 TEFC 3 TEFC 1 TEFC 3 TEFC 1 TEFC 3 TEFC
115-208/230
B 3/4
1 1
3/2
5.4 [13.8]
2.6 [6.7]
N/A
208-230/460
10.1 [25.7]
9.5 [24.1]
44
115-208/230 208-230/460 115-208/230 208-230/460 115-208/230 208-230/460 115-208/230 208-230/460 208/230
12/6
5.4[13.8]
2.6 [6.7]
5.1 [12.9]
10.1 [25.7]
9.9 [25.1]
53
C 1
1 1
4/2
5.4 [13.8]
2.6 [6.7]
N/A
10.1 [25.7]
9.5 [24.1]
48
22/11
5.4 [13.8]
3.2 [8.3]
5.1 [12.9]
10.3 [26.1]
9.9 [25.1]
64
D
1½
1¼ 1¼
6/3
5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8] 5.4 [13.8]
3.2 [8.3] 3.2 [8.3] 3.2 [8.3] 3.2 [8.3] 3.2 [8.3]
N/A
10.3 [26.1] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1]
9.8 [24.9] 9.8 [24.9] 9.8 [24.9] 9.8 [24.9] 9.8 [24.9]
67 75 63 59 54
28/14
5.0 [12.7]
E
2
1½
1½
16 8/4 7/4
5.0 [12.7] N/A N/A
F
3
2
2
2ES30C-3P
Maximum Solids Handling Capacity: 3/8" Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
Standard Features • NEMA Dual Cycle 50/60 Hz Base Mounted Motor • Self-cleaning Impeller • Discharge Rotates in 45° Increments • Maximum Working Pressure 125 PSI
• Cast Iron Construction • EPDM/EPR Mechanical Seal and O-rings • 303 Stainless Steel Motor Shaft • NEMA 56J TEFC Single or Three Phase Motors
• Maximum Temperature 180° F • Front Drain Plugs • QSP—Quick Ship Pump for Many Models • Solids Handling Design
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-18
Made with FlippingBook Learn more on our blog