MEASURING & FIT SIZE GUIDE
CARE AND MAINTENANCE
SHORTS, TROUSERS, COVERALL & OVERALLS REGULAR SIZES
WASHING INSTRUCTIONS
RECOMMENDATIONS TO PROLONG THE LIFE OF YOUR GARMENTS!
72R 77R 82R 87R 92R 97R 102R 107R 112R 117R
IMPERIAL SIZE
2
3
4
5
6
7
8
9
10
11
TO FIT WAIST (cm)
72
77
82
87
92
97
102
107
112
117
COTTON DRILL
QUICK TIPS
TO FIT WAIST (inches)
28
30
32
34
36
38
40
42
44
46
TO FIT CHEST (cm)
82
87
92
97
102
107
112
117
122
127
WARM MACHINE WASH DO NOT WASH OVER 60˚C
Always follow instructions on all care labels attached to the garment. Dry and store safety hi vis garments away from sources of heat and light. Inspect regularly for garment serviceability, excessive fading, mechanically damaged components or dirt/soiling.
TO FIT INLEG (cm)
71
74
77
79
82
83
84
87
87
87
WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS AND GARMENTS FOR CONSECUTIVE WASHES.
STOUTS SIZES
82S 87S 92S 97S 102S 107S 112S 117S 122S 127S 132S
IMPERIAL SIZE
21/4 31/4 41/4 51/4 61/4 71/4 81/4 91/4 101/4 111/4 121/4
TO FIT WAIST (cm)
82
87
92
97
102
107
112
117
122
127
132
DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS OR DOMESTIC DETERGENTS CONTAINING WHITENERS
TO FIT WAIST (inches)
32
34
36
38
40
42
44
46
48
50
52
TO FIT CHEST (cm)
92
97
102
107
112
117
122
127
132
137
142
TO FIT INLEG (cm)
69
71
74
76
79
79
81
81
81
81
LINE DRY IN SHADE AVOIDING PROLONGED TIME IN SUNLIGHT REDUCES COLOUR FADING
LONGS SIZES
74L
79L
84L
89L
94L
SPECIAL NOTES
IMPERIAL SIZE
31/2 41/2 51/2 61/2 71/2
TO FIT WAIST (cm)
74
79
84
89
94
If any of the above is not followed, it may result in garment non-conformance to specified Australian Standards and therefore should be replaced. We recommend a critical garment examination every 3-6 months intervals.
TO FIT WAIST (inches)
29
31
33
35
37
MAY BE TUMBLE DRIED ON WARM SETTING
TO FIT CHEST (cm)
87
92
97
102
107
TO FIT INLEG (cm)
77
80
83
85
88
HOT IRON ON REVERSED SIDE DO NOT IRON TAPE IF APPLICABLE
SHIRTS, KNITWEAR, JACKETS SIZE 2XS
XS
S
M L
XL
2XL 3XL 4XL 5XL 6XL
WOMEN’S CONVERSION
6
8
10
12
14
16
18
20
22
24
TO FIT NECK (cm)
32/33 34/35 36/37 38/39 41/42 43/44 45/46 48/49 50/51 52/53 55/56
FR GARMENTS
GARMENTS TRIMS
TO FIT CHEST (cm)
82
87
92
97
102
107
112
117
122
127
132
WS WORKWEAR RECOMMENDS
80-85 85-92 90-94 95-99 100-104 105-109 110-114 115-119 120-124 124-129 130-134
Flame resistant garments require special laundering and care to optimise their performance and prolong the protective quality of the fabrics.
Just like fabrics, components like reflective tape, polyester patches and other trims require care. Here are some extra tips:
WOMEN’S SHIRT & TROUSERS SIZE 6
8
10
12
14
16
18
20
22
24
Where possible, you should wash the garment inside out. This helps protect trims for any abrasion and avoid any bleeding of colours.
TO FIT NECK (cm)
35
36
37
38
39
41
42
43
44
45
WARM MACHINE WASH DO NOT WASH OVER 60˚C WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS OR WITH OTHER FR GARMENTS DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS DO NOT USE FABRIC SOFTENERS ON FR GARMENTS DO NOT USE ACID RINSE (e.g. vinegar, citric acid, acetic acid or any acid mostly used in commercial laundering)
TO FIT BUST (cm)
82
87
92
97
102
107
112
117
122
127
TO FIT WAIST (cm)
67
75
77
82
87
92
97
102
107
112
Do not use fabric softener on reflective tape garments. Excessive amounts of fabric softener may significantly damage the reflectivity of the tape.
TO FIT HIPS (cm)
87
93
98
103
108
113
118
123
128
133
FOR A COMFORTABLE FIT - IT IS IMPORTANT TO MEASURE CORRECTLY WHEN MEASURING - MAKE SURE THE TAPE MEASURE IS LEVEL AND NOT TIGHT
This guide follows Australian BODY SIZING MEASUREMENTS recommendation.
THESE ARE NOT GARMENT MEASUREMENTS (with the exception to fit waist for short/pants)
NECK: Measure around your neck where the collar sits, allowing two fngers behind tape measure for comfort. CHEST/BUST: Measure straight and around the fullest part of your chest or bust. Ensuring tape is kept level and straight across the back. WAIST: Measure around natural waist line. This is where your pants sit and measure over under garments and not over pant waistband. Keep tape label yet not too tight against skin.
SPECIAL NOTES
DO NOT TUMBLE DRY HOT OR DO NOT OVER DRY OTHERWISE IT WILL RESULT IN EXCESSIVE SHRINKAGE
FOR TROUSERS Use only waist and inside leg measurements to make your selection. FOR SHIRT CHEST Please note this is “ TO FIT ” chest measurement - shirts chest measurements are bigger for comfort and movement. FOR JACKETS Use chest measurement only. Jackets are normally worn over clothing and have been designed to be slightly bigger than a shirt.
HIP: Measure loosely
around the fullest part of the hips keeping the tape level at the back and measure over undergarments.
WARM IRON ON REVERSED SIDE DO NOT IRON TAPE IF APPLICABLE
INLEG: Measure inside leg from the crotch seam to the heel of the shoe.
91
wsworkwear.com.au
90
VOL1
Made with FlippingBook Annual report