GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
11.6 Detailed description of BST Working at Height & Manual Handling Module
INTRODUCTION
15 min.
The aim of this lesson is to give the participants the needed awareness of the course content and the facilities in order to ensure that all participants are aware of what to expect and what is expected of them during the course.
To successfully complete this BST Working at Height with Manual Handling Module, participants shall be aware of:
Safety instructions and emergency procedures
Facilities
Who the instructor and other participants are
Aims and primary learning objectives
On-going assessment according to GWO Control Measures
Motivation for this BST course
ELEMENT 1.1 - SAFETY INSTRUCTIONS AND EMERGENCY PROCEDURES
The instructor shall:
Explain the safety instructions according to internal procedures
Explain the emergency procedures and emergency exits in the areas where the participants can be expected to be located during the course
ELEMENT 1.2 - FACILITIES
The instructor shall:
Describe the location of the on-site facilities (administration, dining area, restrooms, toilets, etc.)
ELEMENT 1.3 - INTRODUCTION
The instructor shall:
Give a short introduction, including their backgrounds as instructors
Global Wind Organisation www.globalwindsafety.org
113 / 206
Made with FlippingBook - Online magazine maker