GWO BST V14.0

GWO Basic Safety Training V14.0

2021-04-01_TS_BST_V14

The participants can take responsibility for conducting safe transfer between vessel and WTG applying lanyards and connectors (Ability, intermediate level)

The instructor shall:

Explain and demonstrate:

a) The importance of identifying hazards (swells, marine growth, waves, equipment failure) relating to the transfer, including the right to say stop/refuse to transfer

b) Pre-use inspection of PPE (quick connector included) prior to commencing transfer process

c)

Safe transfer of self between vessel and WTG using:

d)

SRL with quick connector

e)

SRL without connector

f)

Twin fall arrest lanyards

g) Underline the importance of observing and learning from the other participants doing the transfer exercises

h) Provide constructive feedback to the participants during the exercises

Participants shall practice:

Pre-use inspection of PPE (quick connector included) prior to commencing transfer process

Two transfers* (One transfer to and one from the WTG) of self of each type listed below per participant:

a)

SRL with quick connector

b)

SRL without quick connector

c)

Twin fall arrest lanyards

*

Based on the “G+ Offshore Wind Health and Safety Association, Good Practice Guideline: Working at height at the offshore wind industry”, Section: 4.4.3 Protection against falling: SRL on boat landing ladder

a) Pre-use inspection of PPE (quick connector included) prior to commencing transfer process

The participants shall practice taking responsibility on their own:

Keep one hand on handrail when moving about vessel

Advance from the designated transfer waiting area to the vessels transfer position upon the co mmand “ADVANCE” from the Deckhand

Global Wind Organisation www.globalwindsafety.org

172 / 206

Made with FlippingBook - Online magazine maker