GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
2. BST MANUAL HANDLING
The following equipment is required during the entire duration of this BST Manual Handling Training to meet the needs of the BST Manual Handling Module
A Lumbar Vertebrae model for educational purposes
A model of a shoulder for educational purposes
A load that weighs no more than 30 kg. (66.14 lbs.) and is unwieldy:
difficult to grasp, difficult to grip, with contents likely to move or shift (e.g. a rescue dummy)
Other lifting props for Manual Handling:
weighing maximum 15 kg. (33.07 lbs.)
Personal Protective Equipment.
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
3. BST FIRE AWARNESS
The following equipment is required to meet the needs for the Fire Awareness Module
Handheld CO 2 and water extinguishers
Fire blankets
Dummies
Personal Protective Equipment (PPE)
Personal escape mask (optional)
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Global Wind Organisation www.globalwindsafety.org
178 / 206
Made with FlippingBook - Online magazine maker