GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
Vertical aluminium ladders
Anchor points
Note: The height of the anchor point shall ensure that in the event of a fall there will be enough space below the anchor point to allow the shock absorber in a fixed length fall arrest lanyard to fully deploy whilst preventing the person who is falling from coming into contact with the ground or structure below the anchor point.
The GWO recommends an anchor point height of 6.75 m (22.15’) for the evacuation exercises.
The recommended height is based upon the following formula,
𝑅𝐷 = 𝐿𝐿 + 𝐷𝐷 + 𝐻𝐻 + 𝐶,
Where,
𝑅𝐷 = Required Fall Distance Clearance (minimum anchor point height) 𝐿𝐿 = Length of Lanyard 𝐷𝐷 = Deceleration Distance (fall distance) 𝐻𝐻 = Height of Suspended Worker 𝐶 = Safety Factor
The value for 𝐻𝐻 is the length of the suspended worker after a fall and includes factors like the height of the person and harness stretch, to account for these variables this is set to 2.00 m. Using the value for 𝐻𝐻 (2.00 𝑚) , the maximum allowed values for 𝐿𝐿 (2.00 𝑚) & 𝐷𝐷 (1.75 𝑚), and the minimum allowed value for 𝐶 (1.00 𝑚), we get,
𝑅𝐷 = 𝐿𝐿 + 𝐷𝐷 + 𝐻𝐻 + 𝐶
and,
𝑅𝐷 = 2.00 𝑚 + 1.75 𝑚 + 2.00 𝑚 + 1.00 𝑚,
therefore,
𝑅𝐷 = 6.75 𝑚.
Therefore, the GWO recommends that the anchor points used during the evacuation exercises are placed a minimum of 6.75 m (22.15 ’) above the ground or any structure which a person may come into contact with, in the event of a fall.
Global Wind Organisation www.globalwindsafety.org
180 / 206
Made with FlippingBook - Online magazine maker