GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
Working at height changes 12.3 – Working at Heights instructor to participant ratio
- Changed from 1:4 to 1:6 for practical exercises (Remains 1:4 for on-site). 12.4 – Equipment for Working at Heights module
- Inserted an explanation of the generic approach to training.
- Added a requirement to reduce the potential fall factor.
- Inserted additional control measures for a reduction in anchor point height Lesson 1 - Introduction - Time reduced to 15 minutes in line with other GWO Modules. Lesson 3 – Harness
- Element 3.1 – Name changed to Pre-use inspection.
- Element 3.1 - Expanded pre-use inspection.
-
Element 3.2 – Name changed to Fitting.
- Element 3.3 – Name changed to Periodic inspections.
- Element 3.4 – Name changed to documentation.
- Element 3.5 – Name changed to maintenance. Lesson 4 – Fall prevention
- Name changed from work positioning lanyards.
- Moved from lesson 6 in line with the hierarchy of control.
- Element 4.1 – Inserted and incorporates previous element 6.5.
- Element 4.2 – Name changed and moved from 4.6.
- Element 4.2 – Expanded pre-use inspection.
- Element 4.3 – Name changed and moved from 4.1.
- Element 4.4 – Name changed and moved from 4.3. Lesson 5 – Vertical fall arrest systems
-
Time reduced to 25 minutes.
-
Element 5.2 – Name changed.
- Element 5.2 – Expanded pre-use inspection.
- Element 5.3 – Name changed to correct attachment and detachment.
- Element 5.5 – Name changed to Periodic inspections. Lesson 6 – Fall arrest lanyards
-
Time increased to 55 minutes.
Global Wind Organisation www.globalwindsafety.org
196 / 206
Made with FlippingBook - Online magazine maker