GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
• Consequence of expired certificates added under Validity period.
Working at Heights Module
• Removed certification requirement 4 from point 3.3 “Type of equipment used in course and maximum training height”. Removed due to RUK alignment.
• Removed part of the note in point 3.3 WaH module saying “However, a climb to a higher height than the minimum height stated in this Standard can be an indicator of the Participant ’s capability and aptitude to work at heights. The maximum height used during the training must be stated on the certificate”. Removed due to RUK alignment.
Sea Survival Module
• Alignment with updated requirements set by UK Health and Safety Executive for boat transfers:
Section 1.5: Objective (3) added
o
o Section 1.6: Lesson 3, Lesson 4, Lesson 5, Lesson 9 and Lesson 10 altered
o Section 1.9: Element 3.2, Element 4.1 and Element 4.2, Element 5.1, Element 9.2, Element 9.3, Element 10.1, Element 10.2 altered
• MES (Marine Evacuation system) added to List of abbreviations
• Removal of Safe Transfer from Vessel to Vessel exercise due to too high risk while practicing (current objective 4 altered and previous Element 5.6 and 10.3 deleted)
• Validity reduced to 24 months (Section 3.2)
Equipment for easy detachment added (Section 2.6)
Amendment Date
12.03.2014
Approved by & date
GWO SC 27-03-2014
Version
6
Description of changes
Appendix and Change Log
•
• Appendix removed. Change Log moved from the end to the beginning of this document after the title page.
Working at Heights Module
• 1.1: Length of Working at Height course corrected from 8 hours to 16 hours.
• 1.6: Lesson 1 Introduction. The word “Refresher” removed.
• 2.6: Equipment. The version years are removed from the safety/equipment standards. The reason for this is that there are many standards that are frequently updated. Updating all of these standards with their new
Global Wind Organisation www.globalwindsafety.org
203 / 206
Made with FlippingBook - Online magazine maker