GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
10.5 BST Working at Heights Module Timetable
The order in which the elements of this BST Training Module are delivered may vary.
Within the module timetables, approximate duration of each of the lessons are given. The training provider may choose to deliver elements of the training according to other timetables, as long as the total duration is not reduced, and practical elements are not reduced in length. Theoretical elements may be delivered during the practical exercises when feasible.
Approx. Duration
Lesson
Element
1
Introduction
1.1
Safety instructions and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Scope and main objectives
1.5
On-going assessment
1.6
Motivation TOTAL
15 min.
2
Legislation
2.1
Global legislation
2.2
National legislation TOTAL
20 min.
3
Harness
3.1
Proper inspection of PPE
3.2
How to fit the harness correctly
3.3
How often the harness shall be approved globally (EU, UK, USA, etc.)
3.4
Documentation
3.5
Maintenance of PPE
TOTAL
30 min.
4
Fall prevention
4.1
Fall prevention over fall arrest
4.2
Pre-use inspection
4.3
Correct attachment to anchor points
4.4
Correct attachment to the harness
4.5
The importance of using work positioning TOTAL
25 min.
5
Vertical fall arrest systems
5.1
Legal requirements
5.2
Pre-use inspection
5.3
Correct attachment and detachment
5.4
Correct use
Global Wind Organisation www.globalwindsafety.org
73 / 206
Made with FlippingBook - Online magazine maker