GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
b. Leg straps sit well
c. Abdominal strap should sit well
d. Chest strap (strapped slightly above or on the chest)
e. Pivot link shall be at the hip and shall be flexible, may not sit as high that it can damage ribs and internal organs by a fall
Participants shall:
Practice and demonstrate the ability to correctly fit and adjust a harness covering the points in sub-element 3.2.2 to a snug fit
ELEMENT 3.3 - PERIODIC INSPECTIONS
The instructor shall:
Explain how often the harness shall be approved globally (in the EU, UK, USA, Canada, Mexico, etc.)
ELEMENT 3.4 - DOCUMENTATION
The instructor shall:
Explain documentation, instrument number, authorisation date, etc.
Explain how to identify the approval documentation, equipment serial number, authorisation date, etc.
ELEMENT 3.5 - MAINTENANCE
The instructor shall:
Explain how to store and maintain a harness (e.g. storage in dry environment, wash with fresh water, etc.)
FALL PREVENTION
25 min.
The aim of this lesson is to enable the participants to use fall/travel restraint and work positioning lanyards to prevent a fall and reduce the risk of injuries whilst working at height
To successfully complete this BST Module, participants shall be able to:
Global Wind Organisation www.globalwindsafety.org
80 / 206
Made with FlippingBook - Online magazine maker