GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
ELEMENT 12.4 - SAFE BEHAVIOUR
The instructor shall:
Explain safe behaviour in connection with evacuation
Participants shall:
Demonstrate the ability to perform a passive mode and active mode setup evacuation from height using full PPE and a random evacuation device (demonstrated during this module)
Demonstrate the ability to disconnect the device after reaching the ground level.
Demonstrate the ability to use techniques like attaching equipment to their harness to reduce the risk of dropped objects
Lesson 12 Notes
During the evacuation scenarios the participants who are not performing the exercise shall be in a safe area (at ground level) where they can familiarise themselves with setting up evacuation equipment and rigging the equipment for an evacuation.
An instructor shall be at the height chosen to descend from.
Instructor(s) and participants shall be secured to an anchor point while waiting to descend (this can be achieved by correct use of the fall arrest lanyard). When participants are demonstrating the evacuation, a safety line that is connected to the participant ’s harness shall be used. This will be set up and controlled by the instructor and be secured to a separate anchor point than that of the evacuation device. Although not a requirement of this standard, participants may repeat the evacuation exercises should sufficient time be available.
PPE REVIEW
10 min.
The aim of this lesson is to give the participants the opportunity to discuss the individual parts of the PPE equipment and use of the PPE in their own words.
This lesson is intended to be a recap for the beginning of day 2.
To successfully complete this BST Module, participants shall be able to:
Recall the individual parts of the PPE equipment and correct pre-use inspection and use of the PPE (L2 – Knowledge)
Global Wind Organisation www.globalwindsafety.org
97 / 206
Made with FlippingBook - Online magazine maker