GWO Basic Safety Training V14.0
2021-04-01_TS_BST_V14
ELEMENT 13.1 - THE INDIVIDUAL PARTS OF THE PPE EQUIPMENT
Participants shall:
Recall the individual parts of the PPE equipment and instruction in pre-use inspection and use
RESCUE DEVICES AND RIGGING SETUP
20 min.
The aim of this lesson is to enable the participants to utilise a rescue device in a wind turbine environment
To successfully complete this BST Module, participants shall be able to:
Explain the individual parts of the rescue equipment (L2 – Knowledge)
Explain the correct usage of rescue devices, anchor points and various rigging configurations on a ladder system (L2 – Knowledge)
ELEMENT 14.1 - THE INDIVIDUAL PARTS OF DIFFERENT RESCUE DEVICES
The instructor shall:
Explain and demonstrate the individual parts of different rescue devices, including accessories, covering:
a. How to attach the device to an anchor point
b. How to utilise an integrated friction device (e.g. pig tail/bull horn) to divert the rope
c. How to rig the device with deflection applying a friction carabiner for an active mode setup
d. How to secure the rope
e. The use of a rope clamp for rescue (enabling lifting/safe disconnection of a loaded rope type fall protection lanyard) Stress the generic approach in the parts of a rescue device focusing on similarities and differences in design, functionality and operation between different products Explain the potential task placed upon the participant in their own organisation on course completion, requiring them to familiarise themselves with other safety equipment products
ELEMENT 14.2 - CORRECT USE OF RESCUE DEVICES & SLINGS
The instructor shall:
Explain that pre-use inspection of the evacuation/rescue device may be omitted only if it is permitted b y the manufacturer’s manual and the manufacturer criteria
Global Wind Organisation www.globalwindsafety.org
98 / 206
Made with FlippingBook - Online magazine maker