Hempel Internal Document
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Acrylic Satin Finish 6.1. Number of coats: TWO 6.2. White ONLY.
150M
Solvent borne satin paint
1. Description: Interior- new or pre-primed timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Satin Finish 3. Surfaces: New timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat. 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Satin Finish 6.1. Number of coats: TWO
150N
Solvent borne satin paint
1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Satin Finish 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Satin Finish 6.1. Number of coats: TWO
150O
Solvent borne satin paint
1. Description: Interior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Satin Finish 3. Surfaces: New galvanised
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 36 of 91
Made with FlippingBook - Online magazine maker