Hempel Internal Document
4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T-Wash (as manufacturers instructions) then prime with Crown Trade Universal Metal Primer 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Satin Finish 6.1. Number of coats: TWO
150P
Solvent borne satin paint
1. Description: Interior new & unpainted - PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Satin Finish 3. Surfaces: PVC-U as identified
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Satin Finish 6.1. Number of coats: TWO
150Q
Solvent borne eggshell paint
1. Description: Interior- new or pre-primed timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Eggshell 3. Surfaces: New timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat. 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Eggshell 6.1. Number of coats: ONE
150R
Solvent borne eggshell paint
1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Eggshell 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer 4.1. Number of coats: ONE
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 37 of 91
Made with FlippingBook - Online magazine maker