Crown Paints M60 Master Specification

Hempel Internal Document

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-760B as appropriate, specifically 418C/760B. Refer to manufacturers data sheet 3.1.1. NOTE: Sadolin PV67 Heavy Duty Varnish can NOT be applied over conventional varnishes or stains. Remove coatings- refer Clause 481C. 4. Initial coats: Sadolin PV67 Heavy Duty Varnish 4.1. Number of coats: ONE 5. Finishing coats: Sadolin PV67 Heavy Duty Varnish 5.1. Number of coats: TWO

161D

Decorative varnish

1. Description: Existing interior stained/varnished interior joinery- excluding floors 2. Manufacturer: Crown Woodcare from Crown Paints 2.1. Product reference: Crown Quick Drying Varnish 3. Surfaces: Existing stained/varnished timber as identified- excluding floors 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Prime any bare areas with Crown Quick Drying Varnish 4.1. Number of coats: ONE 5. Finishing coats: Crown Quick Drying Varnish 5.1. Number of coats: THREE

162A

Decorative woodstain new exterior joinery

1. Description: UV protection 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin Extra 3. Surfaces: New timber as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-790A as appropriate 4. Initial coats: Sadolin Classic 4.1. Number of coats: ONE 5. Finishing coats: Sadolin Extra 5.1. Number of coats: TWO

162C

Water borne decorative woodstain

1. Description: new exterior joinery up to 6 years 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin Quick Drying Woodstain 3. Surfaces: New timber as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-790A as appropriate 4. Initial coats: Sadolin Quick Drying Woodstain 4.1. Number of coats: ONE 5. Finishing coats: Sadolin Quick Drying Woodstain 5.1. Number of coats: ONE or TWO depending on depth of colour required

Crown Trade 23-05-2024

M60 Painting/clear finishing Page 54 of 91

Made with FlippingBook - Online magazine maker