Hempel Internal Document
5. Finishing coats: Sadolin Beautiflex 5.1. Number of coats: TWO
164H
Quick drying woodstain
1. Description: new exterior smooth timber 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin Quick Drying Woodstain 3. Surfaces: New timber as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-751 as appropriate 4. Initial coats: Sadolin Quick Drying Woodstain 4.1. Number of coats: ONE 5. Finishing coats: Sadolin Quick Drying Woodstain 5.1. Number of coats: ONE/TWO depending on finish
165A
Shed & fence woodstain existing coated smooth or sawn timber
1. Description: up to 5 years 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin Shed & Fence Woodstain 3. Surfaces: Timber as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-751 as appropriate 4. Initial coats: Sadolin Shed & Fence Woodstain to bare and filled areas- to match existing colour 4.1. Number of coats: AS NECESSARY 5. Finishing coats: Sadolin Shed & Fence Woodstain 5.1. Number of coats: TWO
165B
Low build woodstain coated exterior coated smooth or sawn
timber
1. Manufacturer: Sadolin from Crown Paints 1.1. Product reference: Sadolin Classic 2. Surfaces: Timber as identified 2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-751 as appropriate 3. Initial coats: Sadolin Classic to bare and filled areas- to match existing colour 3.1. Number of coats: AS NECESSARY 4. Finishing coats: Sadolin Classic 4.1. Number of coats: TWO
165C
Solvent borne shed & fence opaque existing coated smooth or
sawn timber up to 6 years
1. Manufacturer: Crown Woodcare from Crown Paints 1.1. Product reference: Crown Flexarb Opaque 2. Surfaces: Timber as identified
2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-751A as appropriate
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 59 of 91
Made with FlippingBook - Online magazine maker