Hempel Internal Document
5.1. Number of coats: ONE/TWO as required
169D
Translucent low build decking stain
1. Description: Existing stained decking 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin Classic 3. Surfaces: Existing decking timber as identified
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-760D as appropriate 4. Initial coats: Sadolin Classic 4.1. Number of coats: ONE 5. Finishing coats: Sadolin Classic 5.1. Number of coats: ONE/TWO as required
170A
Solvent borne masonry coating
1. Description: new exterior masonry up to 20 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade 365 All Weather 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade Stabilising Solution to address porosity or residual powdery surfaces 4.1. Number of coats: ONE 5. Finishing coats: Sandtex Trade 365 All Weather 5.1. Number of coats: TWO
170B
Water borne masonry coating
1. Description: new exterior masonry up to 20 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade X-treme X-posure 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade X-treme X-posure thinned 40% with clean water to address surface porosity or Sandtex Trade Stabilising Solution to address porosity/residual powdery surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Sandtex Trade X-treme X-posure 5.1. Number of coats: TWO
170C
Water borne masonry coating
1. Description: new exterior masonry up to 20 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade High Cover Smooth 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 65 of 91
Made with FlippingBook - Online magazine maker