Hempel Internal Document
4. Initial coats: Sandtex Trade High Cover Smooth thinned 40% with clean water to address surface porosity or Sandtex Trade Stabilising Solution to address porosity/residual powdery surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Sandtex Trade High Cover Smooth 5.1. Number of coats: TWO
170D
Textured water borne masonry coating
1. Description: new exterior masonry up to 15 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Fine Textured Matt 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade Fine Textured Matt thinned 40% with clean water to address surface porosity or Sandtex Trade Stabilising Solution to address porosity/residual powdery surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Sandtex Trade Fine Textured Matt 5.1. Number of coats: TWO
170E
Anti carbonation water borne masonry coating
1. Description: new exterior masonry up to 10 years 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Smooth 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Stronghold Smooth thinned 40% with clean water to address surface porosity or Crown Trade Stabilising Solution to address porosity/residual powdery surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Crown Trade Stronghold Smooth 5.1. Number of coats: TWO
170F
Textured water borne masonry coating
1. Description: new exterior masonry up to 15 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Textured 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Stronghold Textured thinned 40% with clean water to address surface porosity or Crown Trade Stronghold Solution to address porosity/residual powdery surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Crown Trade Stronghold Textured 5.1. Number of coats: TWO
171A
Solvent borne masonry coating
1. Description: existing painted exterior masonry up to 20 years
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 66 of 91
Made with FlippingBook - Online magazine maker