Hempel Internal Document
2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade 365 All Weather 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate affect the adhesion of the materials to be applied. 4. Initial coats: Sandtex Trade Stabilising Solution to address porosity/residual powdery/chalky surfaces 4.1. Number of coats: ONE 5. Finishing coats: Sandtex Trade 365 All Weather 5.1. Number of coats: TWO
171B
Water borne masonry coating
1. Description: existing painted exterior masonry up to 20 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade X-treme X-posure 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade Stabilising Solution to address porosity/residual powdery/chalky surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Sandtex Trade X-treme X-posure 5.1. Number of coats: TWO
171C
Water borne masonry coating
1. Description: existing painted exterior masonry up to 15 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade High Cover Smooth 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade Stabilising Solution to address porosity/residual powdery/chalky surfaces 4.1. Number of coats: ONE as required 5. Finishing coats: Sandtex Trade High Cover Smooth 5.1. Number of coats: TWO
171D
Textured borne masonry coating
1. Description: existing painted exterior masonry up to 15 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Fine Textured Matt 3. Surfaces: New uncoated masonry
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Sandtex Trade Stabilising Solution to address porosity/residual powdery/chalky surfaces
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 67 of 91
Made with FlippingBook - Online magazine maker