Hempel Internal Document
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate. 4. Initial coats: Crown Trade Fast Drying Concrete Floor Paint Coating as a primer to bare or filled areas. Bring forward with Crown Trade Fast Drying Concrete Floor Paint 4.1. Number of coats: ONE & ONE 5. Finishing coats: Crown Trade Fast Drying Concrete Floor Paint 5.1. Number of coats: TWO
181D
Floor coating
1. Description: Existing coated concrete- clear finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Epimac Clear Floor Coating 3. Surfaces: Existing coated concrete
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate. ) 4. Initial coats: Crown Trade Epimac Clear Floor Coating as a primer to bare or filled areas. Bring forward with Crown Trade Epimac Clear Floor Coating 4.1. Number of coats: ONE+ONE 5. Finishing coats: Crown Trade Epimac Floor Clear Coating 5.1. Number of coats: TWO
182A
Clear floor coating
1. Description: New timber 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Epimac Floor Coating Clear 3. Surfaces: Bare timber
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-760B as appropriate, specifically 418D/760B. Refer to manufacturers data sheet 4. Initial coats: Crown Trade Epimac Floor Coating Clear 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Epimac Floor Coating Clear 5.1. Number of coats: TWO
182B
Heavy duty clear floor coating
1. Description: New bare timber- satin/gloss 2. Manufacturer: Sadolin from Crown Paints 2.1. Product reference: Sadolin PV67 Heavy Duty Varnish 3. Surfaces: Coated timber
3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-760B as appropriate, specifically 418C/760B. Refer to manufacturers data sheet 3.2. NOTE: : Sadolin PV67 Heavy Duty Varnish can NOT be applied over conventional varnishes or stains. Remove coatings- refer Clause 481C. 4. Initial coats: Sadolin PV67 Heavy Duty Varnish 4.1. Number of coats: ONE 5. Finishing coats: Sadolin PV67 Heavy Duty Varnish
Crown Trade 23-05-2024
M60 Painting/clear finishing Page 82 of 91
Made with FlippingBook - Online magazine maker